The handle makes it easy to brush by hand. Clean delicate surfaces inside tubes, pipes, and holes.

Attach the shank to a handle or power tool.

Keep a variety of brushes on hand to clean surfaces inside tubes, pipes, and holes where scratching is a concern.

Attach the shank to a handle or power tool.

The handle makes it easy to clean tubes, pipes, and holes by hand.

Grip the handles on these brushes for extra leverage when cleaning tubes, pipes, and holes by hand.

Remove light-to-medium rust and stains and small burs from tubes, pipes, and holes.

The long shaft on these brushes snakes around curves to reach deep into tubes.

Remove light to medium rust, stains, and small burs from tubes, pipes, and holes.

Attach the shank to a handle or power tool.

Abrasive grains are embedded in the entire length of the bristles to remove workpiece material as well as surface contamination in a single step.

Use for hard, heavy deposits.

Bristles inside the housing and a protruding brush clean the inside and outside of tubes in one step.

Clean the inside and outside of a tube with one brush.

Use for tasks such as removing weld slag, heavy surface contamination, and large burs.

Bend these brushes through curved holes and reach into corners.

Sets include an assortment of brushes for cleaning the inside and outside of tubes.

Removable bands around the bristles keep them from flaring and breaking. Adjust the bands to change bristle length.

The abrasive lasts longer than that of standard brushes.

Use for tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs. The small brush face can access hard-to-reach spots.

Removable bands around the bristles keep them from flaring and breaking. Adjust the bands to change bristle length.

The bristles are coated with a synthetic compound that keeps them stiff and straight so they’re more aggressive and last longer than standard brushes.

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

Use on delicate surfaces.

Use on delicate surfaces.

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

The bristles are partially twisted in alternating directions, which prevents them from separating.

The guard deflects dust and sheared-off bristle tips.

Made of phosphorus bronze that is Factory Mutual approved, the bristles on these brushes inhibit sparking and are nonmagnetic and corrosion resistant.

Made of phosphorus bronze that is Factory Mutual approved, the bristles on these brushes inhibit sparking and are nonmagnetic and corrosion resistant.

Multiple wires are twisted into each bristle for a long life.

Clean around edges, corners, and contours with these dish-shaped brushes.

Made of phosphorus bronze that is Factory Mutual approved, these brushes inhibit sparking and are nonmagnetic and corrosion resistant.

Rigid, twisted bristles handle tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs.

Made of phosphorus bronze that is Factory Mutual approved, these brushes inhibit sparking and are nonmagnetic and corrosion resistant.

A mounting nut on each side of the arbor lets you use both sides of the brush.

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

A special fastener on the back of these brushes allows you to easily swap one brush for another.

Steel bristles remove weld slag and heavy surface contamination.

These brushes have steel bristles for removing weld slag and heavy surface contamination.

Scrub the gunk out of floor drains and mop sinks.

Clean inside containers, pipes, and other places where most brushes can’t fit.

Clean small pin holes and screw holes with these flexible brushes.

These brushes, crevice tools, blower nozzles, extension wands, and other fittings work with any vacuum hose with the same diameter and manufacturer.

Position these brushes on an angle to fit 11" to 29" wide conveyors. Use them for product positioning and light cleaning.

Also known as pastry brushes, these have synthetic bristles and a one-piece plastic handle to minimize buildup.

These brushes have synthetic bristles that won’t absorb water, so they keep their shape when used with water-based paint and coatings. The smallest brushes we sell, use these for precision applications.

The handle is a cartridge that dispenses ink into the brush with the push of a button.

As chain, gears, and conveyors move, these brushes rotate to apply lubricant.