A rubber cover protects the mounting surface as well as the magnet.

Alnico magnets resist temperatures up to 420° F.

A rubber cover protects the mounting surface as well as the magnet.

These ceramic magnets resist demagnetization better than other magnets, and have a metal case to protect the magnetic material. They resist temperatures up to 175° or 245° F.

A rubber cover protects the magnet and mounting surface.

To add a magnetic surface anywhere, install the mounting plate, then screw on the magnet.

A case protects the magnetic material.

Press these magnets into a drilled hole so they are flush against the surface.

Cover these unfinished magnets with your choice of coating to prevent corrosion.

Even at temperatures up to 300° F, these magnets have strong holding power.

Ceramic magnets resist demagnetization better than other magnets and are an economical choice. They resist temperatures up to 400° F.

Made of neodymium, these rare earth magnets are the strongest for their size. Slide onto a rod or use a bolt or screw to install.

Ceramic magnets resist demagnetization better than other magnets and are an economical choice. They resist temperatures up to 400° F.

Press these magnets into place, or use them like a tongue and groove to align components. The stepped profile allows you to install them without adhesives or screws.

Slide these magnets onto a rod or install with a bolt. They are bonded with epoxy resin, so they can be machined with carbide tooling.

Plug in these electromagnets to create a magnetic hold. A transformer in the plug converts power from AC to DC, so no additional wiring or power source is needed.

These magnet pairs attract for a strong hold but repel when twisted for an easy release. Use them on doors, covers, and other parts that need to be repeatedly installed and removed.

These discs are made of corrosion-resistant ceramic and bonded with rubber for flexibility.

A fluorescent orange handle makes these retrievers stand out, so they’re less likely to be misplaced.

Often used to pick up steel sheets, the magnet holds material until you press the lever to disengage it.

An extra-long shaft and pivoting head lets you access hard-to-reach material from almost any angle.

LEDs light the magnetized tip and the shaft bends and stays in position to reach objects in awkward spaces.

Push the plunger to engage the magnet; release to disengage. These retrievers bend into position and stay in place.

Magnetized on all sides, these wand-like tools remove steel chips from machinery, the floor, and your clothing. Pull the plunger to demagnetize and drop the chips into your collection bin.

These filters are designed without guide rods to prevent wet and sticky material from blocking flow.

Easy to keep clean thanks to their design, these filters pull metal and magnetic particles out of food and sanitary material as it passes through gravity hoppers, chutes, and other parts of your process line.