Router Bearings | McMaster-Carr

Filter by

Shank Diameter

Cutting Diameter

Cut Style

For Use On

Length of Cut

Tool Type

Number of Flutes

Pilot Location

Material

Ball Bearing Pilot Diameter

Flute Type

Cut Angle

Finish

Width

Cut Radius

Corner Type

Bullnose with Beading

DFARS Specialty Metals

Exempt

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

REACH

RoHS

Rabbet Width

114 Products

Trimming Router Bits

Cut layers of material flush to one another or make cuts along a template.

Uncoated Carbide-Tipped High-Speed Steel


Flush-Trimming Cut Style (Bottom Pilot)	Flush-Trimming Cut Style (Top Pilot)

Flush-Trimming Cut Style (Top Pilot)—Plunge-Cut


Bottom Pilot	Top Pilot

Carbide-tipped high-speed steel bits are for use on wood and laminate.

Bottom Pilot—Bottom-pilot bits trim material from an upper layer of the workpiece so that it is flush with the layer below. In addition to flush trimming, they can be used to cut along a template placed below the workpiece.

Top Pilot—Top-pilot bits cut a lower layer of the workpiece flush to the layer above. In addition to flush trimming, they can be used for pattern cutting with a template placed above the workpiece.

Plunge Cut—Bits with a plunge cut type let you cut directly into the workpiece from above. Other bits are best for operations where the peripheral teeth do most of the work such as trimming, contouring, and finishing.

Straight Flutes—Bits with straight flutes are for general purpose use. They quickly remove material, leaving a rough finish.

Ball Bearing—Ball-bearing pilots guide the bit for accurate cuts and produce less friction than solid pilots for smoother operation.

Pilot Location—Pilot location describes the position of the pilot when the bit is used for hand routing. The pilot location is reversed when using the bit with a router table.

	Lg. of Cut	Shank Dia.	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On		Each
Flush-Trimming Cut Style (Bottom Pilot)







			Straight Flutes

			3/16"	7/16"	1/8"	1 23/32"	Ball Bearing	3/16"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N103	000000


			3/16"	7/16"	1/4"	2"	Ball Bearing	3/16"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N104	00000
			3/16"	3/4"	1/4"	2 7/16"	Ball Bearing	3/16"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N105	00000
			1/4"	1/2"	1/4"	2 1/4"	Ball Bearing	1/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N22	00000
			1/4"	1"	1/4"	2 1/2"	Ball Bearing	1/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	35505A11	00000
			3/8"	1/2"	1/4"	2 1/4"	Ball Bearing	3/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	35505A62	00000
			3/8"	1"	1/4"	2 3/4"	Ball Bearing	3/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	35505A63	00000
			3/8"	1"	1/2"	3 1/8"	Ball Bearing	3/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N106	00000
			3/8"	1 1/4"	1/4"	2 3/8"	Ball Bearing	3/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N23	00000
			1/2"	1/2"	1/4"	2"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	35505A64	00000
			1/2"	1/2"	1/4"	2"	Ball Bearing	1/2"	3	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N24	00000


			1/2"	1/2"	1/2"	2 3/4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N107	00000
			1/2"	1"	1/4"	2 3/4"	Ball Bearing	1/2"	3	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	35505A65	00000
			1/2"	1"	3/8"	2 7/8"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N108	00000
			1/2"	1"	1/2"	3 1/4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	35505A66	00000
			1/2"	1 1/4"	1/4"	2 3/4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N109	00000
			1/2"	1 1/2"	1/2"	3 7/8"	Ball Bearing	1/2"	3	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N25	00000
			1/2"	1 1/2"	1/2"	4 1/4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	35505A67	00000
			1/2"	2"	1/2"	4 1/4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	35505A68	00000
			1/2"	2"	1/2"	4 5/8"	Ball Bearing	1/2"	3	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N26	00000
			3/4"	1"	1/2"	3 1/4"	Ball Bearing	3/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N27	00000


			3/4"	1 1/4"	1/2"	3 1/2"	Ball Bearing	3/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N28	00000


			Flush-Trimming Cut Style (Top Pilot)







							Straight Flutes

							3/8"	1/2"	1/4"	2"	Ball Bearing	3/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N16	00000


							1/2"	1/4"	1/4"	1 5/8"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N12	00000
							1/2"	1/2"	1/4"	2"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N13	00000
							1/2"	1"	1/4"	2 1/2"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N11	00000
							3/4"	1"	1/2"	3"	Ball Bearing	3/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N14	00000
							3/4"	1 3/4"	1/2"	3 3/4"	Ball Bearing	3/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N15	00000


							Flush-Trimming Cut Style (Top Pilot)—Plunge-Cut







									Straight Flutes

	1/4"								3/4"	1/4"	2 7/16"	Ball Bearing	1/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N111	00000


	3/8"	1/2"							1/4"	2"	Ball Bearing	3/8"	3	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N112	00000
	1/2"	3/8"							1/4"	2 1/4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N114	00000
	1/2"	1/2"							1/4"	2 1/2"	Ball Bearing	1/2"	3	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N115	00000
	1/2"	1/2"							1/2"	2 3/4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N116	00000
	1/2"	3/4"							1/4"	2 1/4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N117	00000
	1/2"	3/4"							5/16"	2 3/4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N118	00000
	1/2"	1"							1/4"	2 1/2"	Ball Bearing	1/2"	3	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N122	00000
	1/2"	1 1/4"							1/4"	2 3/4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N119	00000
	1/2"	1 1/4"							1/2"	3 1/2"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N121	00000
	9/16"	3/4"							1/4"	2 5/16"	Ball Bearing	9/16"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N123	00000


	5/8"	1/2"							1/4"	2 1/4"	Ball Bearing	5/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N124	00000
	5/8"	3/4"							1/4"	2 1/2"	Ball Bearing	5/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N125	00000
	5/8"	3/4"							1/4"	2 5/8"	Ball Bearing	5/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N126	00000
	5/8"	1"							1/4"	2 3/4"	Ball Bearing	5/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N127	00000
	5/8"	1 1/4"							1/2"	3 1/2"	Ball Bearing	5/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N128	00000
	3/4"	3/4"							1/4"	2 3/8"	Ball Bearing	3/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N129	00000
	3/4"	3/4"							1/2"	2 3/4"	Ball Bearing	3/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N131	00000
	3/4"	1"							1/4"	2 1/2"	Ball Bearing	3/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N132	00000
	3/4"	1"							1/2"	3 1/4"	Ball Bearing	3/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N113	00000
	3/4"	1 1/4"							1/2"	3 11/32"	Ball Bearing	3/4"	3	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N134	00000


	3/4"	2"							1/2"	4"	Ball Bearing	3/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N133	00000
	1"	1"							3/8"	2 7/8"	Ball Bearing	1"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N135	00000
	1"	1"							1/2"	2 3/4"	Ball Bearing	1"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N136	00000
	1"	1 3/4"							1/2"	3 3/4"	Ball Bearing	1"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N137	00000
	1 1/8"	1"							1/2"	3"	Ball Bearing	1 1/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N138	00000
	1 1/8"	1 1/2"							1/2"	3 1/2"	Ball Bearing	1 1/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N139	00000
	1 1/8"	2"							1/2"	4"	Ball Bearing	1 1/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N141	00000
	1 1/4"	1 1/2"							1/2"	3 3/8"	Ball Bearing	1 1/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N142	00000
	1 1/2"	1 3/4"	1/2"						3 3/4"	Ball Bearing	1 1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3116N143	00000

Uncoated Carbide


Flush-Trimming Cut Style (Bottom Pilot)	Flush-Trimming Cut Style (Top Pilot)—Plunge-Cut

Flush-Trimming Cut

Style (Bottom

Pilot), Spiral

Flutes

Top Pilot

Use carbide bits for longer tool life and faster cutting speeds than high-speed steel.

Spiral Flutes—Bits with spiral flutes leave a smoother finish than straight-flute bits and make plunge cuts more easily (for plunge-cutting bits).

Upward and Downward Chip Removal—Bits with upward and downward chip removal are also known as compression bits. Acting like scissors, they move chips away from the top and bottom edges of the cut for a smooth finish on both.

Ball Bearing—Ball-bearing pilots guide the bit for accurate cuts and produce less friction than solid pilots for smoother operation.

Pilot Location—Pilot location describes the position of the pilot when the bit is used for hand routing. The pilot location is reversed when using the bit with a router table.

	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On		Each
Flush-Trimming Cut Style (Bottom Pilot)







	Spiral Flutes

	1/4"	5/8"	1/4"	2 3/8"	Ball Bearing	1/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Hard Plastic, Soft Plastic, Aluminum, Laminate, Foam, Composite	2819N11	000000


	1/4"	3/4"	1/4"	3"	Ball Bearing	1/4"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Hard Plastic, Soft Plastic, Laminate, Foam, Composite	3116N17	00000
	1/2"	5/8"	1/2"	3 1/2"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Aluminum Laminate	3116N144	000000
	1/2"	1 1/8"	1/2"	4"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Hard Plastic, Soft Plastic, Laminate, Foam, Composite	3116N18	000000


	Flush-Trimming Cut Style (Top Pilot)—Plunge-Cut







					Spiral Flutes with Upward and Downward Chip Removal

					1/2"	1"	1/4"	2 5/8"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Plywood, Laminate	3116N101	000000


					7/8"	1 1/8"	1/2"	3 15/16"	Ball Bearing	7/8"	2	Hand Router, Router Table	Wood, Plywood, Laminate	3116N102	000000

Uncoated Micrograin Carbide

Flush-Trimming Cut

Style (Bottom Pilot)

Bottom Pilot

Bottom Pilot with

Overhang Cutoff Edge

Micrograin carbide bits provide superior wear resistance, long tool life, and a cleaner finish than bits made of other materials.

Use carbide bits for longer tool life and faster cutting speeds than high-speed steel.

Straight Flutes—Bits with straight flutes are for general purpose use. They quickly remove material, leaving a rough finish.

Ball Bearing—Ball-bearing pilots guide the bit for accurate cuts and produce less friction than solid pilots for smoother operation.

1 Flute—Choose a bit with one flute for a faster cut; bits with more flutes produce a smoother finish.

Overhang Cutoff Edge—Bits with an overhang cutoff edge remove most of the excess material from the edge of workpieces such as countertops and sink cutouts, but they leave some material leftover for precise trimming after the installation. This process minimizes the risk of chipping laminate during installation and produces a clean, professional finish.

Pilot Location—Pilot location describes the position of the pilot when the bit is used for hand routing. The pilot location is reversed when using the bit with a router table.

	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On	Features		Each
Flush-Trimming Cut Style (Bottom Pilot)







	Straight Flutes

	3/8"	1/2"	1/4"	2 7/16"	Ball Bearing	3/4"	1	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood, Laminate	Overhang Cutoff Edge	6557N12	000000


	1/2"	3/8"	1/4"	2"	Ball Bearing	1/2"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood, Laminate	—	3116N201	00000
	1/2"	1"	1/4"	2 11/16"	Ball Bearing	5/8"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood, Laminate	Overhang Cutoff Edge	6557N11	00000
	5/8"	3/8"	1/4"	2"	Ball Bearing	5/8"	3	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood, Laminate	—	3116N202	00000

Uncoated Diamond-Tipped Carbide

Flush-Trimming Cut

Style (Bottom Pilot)

Use carbide bits for longer tool life and faster cutting speeds than high-speed steel.

Diamond-tipped carbide bits are for use on aluminum and composites.

Straight Flutes—Bits with straight flutes are for general purpose use. They quickly remove material, leaving a rough finish.

Ball Bearing—Ball-bearing pilots guide the bit for accurate cuts and produce less friction than solid pilots for smoother operation.

Pilot Location—Pilot location describes the position of the pilot when the bit is used for hand routing. The pilot location is reversed when using the bit with a router table.

	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On		Each
Flush-Trimming Cut Style (Bottom Pilot)







	Straight Flutes

	1/2"	7/16"	1/4"	2 5/16"	Ball Bearing	1/2"	2	Hand Router, Router Table	Aluminum, Fiberglass, Composite	3116N19	0000000


	1/2"	1"	1/4"	2 13/16"	Ball Bearing	1/2"	2	Hand Router, Router Table	Aluminum, Fiberglass, Composite	3116N21	000000

Router Bit Bearings

Replace a damaged bearing in a ball-bearing-piloted router bit. These bearings have fitted sleeves to protect your workpiece from damage.

	OD	ID	Wd.	Ball Bearing Pilot Dia.	Sleeve Material		Each
Uncoated Steel



	3/16"	1/2"	3/16"	3/16"	1/2"	Acetal	6596N104	000000


	1/4"	5/8"	1/4"	1/4"	5/8"	Acetal	6596N105	00000
	1/4"	3/4"	1/4"	1/4"	3/4"	Acetal	6596N106	00000

Chamfering Router Bits

Chamfering Cut Style

These bits make chamfer, bevel, and other angled cuts in wood.

Uncoated Carbide-Tipped High-Speed Steel

Chamfering

Cut Style,

Straight

Flutes, Ball

Bearing

Use carbide-tipped high-speed steel bits on wood. They're sturdier than carbide bits and can be used for hand routing. A ball-bearing pilot helps position the bit for straight cuts.

	Shank Dia.	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On		Each
Chamfering Cut Style







	Straight Flutes

	5/8"	1/4"	15°	1/4"	2 1/8"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood	3224N11	000000


	3/4"	1/4"	25°	1/4"	2 1/8"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood	3224N12	00000
	7/8"	1/2"	25°	1/4"	1 7/8"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood	35485A23	00000
	1"	1/2"	45°	1/4"	2"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood	35485A21	00000
	1"	5/8"	45°	1/2"	2 1/2"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood	35485A22	00000

Router Bits for Wood Joining

Create shapes that fit together to form wood joints commonly used to build doors and frames.

Rabbet Wood Joint—Uncoated Carbide-Tipped High-Speed Steel

Rabbet bits have a ball-bearing pilot that guides the bit for accurate cuts and produces less friction than solid pilots for smoother operation.

1 3/8" Cutting Diameter—Rabbet bits with 1 _3/8" cutting diameter include interchangeable bearings in a range of sizes to adjust the rabbet width.

	Shank Dia.	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On		Each
Joining Cut Style







	Straight Flutes

	1 1/4"	3/8"	1/2"	1/4"	2"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood	3187A16	000000


	1 3/8"	1/8", 1/4", 5/16", 3/8", 7/16", 1/2"	1/2"	1/4"	2"	Ball Bearing	3/8", 1/2", 5/8", 3/4", 7/8", 1 1/8"	2	Hand Router, Router Table	Wood, Particleboard, Plywood	3187A21	00000

Slotting Wood Joint—Uncoated Carbide-Tipped High-Speed Steel

Slotting bits have a ball-bearing pilot that guides the bit for accurate cuts and produces less friction than solid pilots for smoother operation.

	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On		Each
Joining Cut Style







	Straight Flutes

	1/16"	1 7/8"	1/4"	2 3/8"	Ball Bearing	7/8"	3	Hand Router, Router Table	Wood, Particleboard, Plywood	3447N13	000000


	1/8"	1 7/8"	1/4"	2 3/8"	Ball Bearing	7/8"	3	Hand Router, Router Table	Wood, Particleboard, Plywood	3447N11	00000
	1/4"	1 7/8"	1/4"	2 3/8"	Ball Bearing	7/8"	3	Hand Router, Router Table	Wood, Particleboard, Plywood	3447N12	00000

Corner-Rounding Router Bits

Choose from bits that form a variety of shapes along the edges of your workpiece.

Uncoated Carbide-Tipped Steel


Rounded Corner Style	Rounded with Beading Corner Style	Bullnose with Beading Corner Style

Cove Corner Style	Wavy Corner Style	Roman Ogee Corner Style

Carbide-tipped steel bits are for use on wood.

Ball Bearing—Bits with a ball-bearing pilot operate smoothly thanks to the pilot, which decreases friction and guides the bit for accurate cuts. Other bits do not have a pilot, so guide your router along a straight edge when hand routing to make accurate cuts.

	Cut Radius	Lg. of Cut	Shank Dia.	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	Bead Radius	For Tool Type	For Use On		Each
Rounded Corner Style







			Straight Flutes

			5/8"	1/16"	5/16"	1/4"	1 3/4"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35455A41	000000


			3/4"	1/8"	3/8"	1/4"	2 1/8"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35455A29	00000
			13/16"	5/32"	15/32"	1/4"	2 3/32"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35455A37	00000
			7/8"	3/16"	1/2"	1/4"	2"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35455A36	00000
			1"	1/4"	7/16"	1/4"	1 29/32"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35455A31	00000
			1 1/4"	3/8"	5/8"	1/4"	2 1/32"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35455A32	00000
			1 1/2"	1/2"	3/4"	1/4"	2 5/32"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35455A33	00000
			1 1/2"	1/2"	3/4"	1/2"	2 11/16"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35455A34	00000
			1 3/4"	5/16"	9/16"	1/4"	2 1/4"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35455A38	00000
			2"	3/4"	1 1/32"	1/2"	3"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35455A35	00000


			Rounded with Beading Corner Style







							Straight Flutes

							5/8"	1/16"	5/16"	1/4"	1 3/4"	Ball Bearing	3/8"	2	1/16"	Hand Router, Router Table	Wood, Particleboard, Plywood	35475A41	00000


							7/8"	3/16"	1/2"	1/4"	2"	Ball Bearing	3/8"	2	3/16"	Hand Router, Router Table	Wood, Particleboard, Plywood	35475A43	00000
							1"	1/4"	7/16"	1/4"	1 29/32"	Ball Bearing	3/8"	2	3/16"	Hand Router, Router Table	Wood, Particleboard, Plywood	35475A71	00000
							1 1/4"	3/8"	23/32"	1/4"	2 3/8"	Ball Bearing	3/8"	2	3/16"	Hand Router, Router Table	Wood, Particleboard, Plywood	35475A72	00000
							1 1/2"	1/2"	13/16"	1/4"	2 13/32"	Ball Bearing	3/8"	2	3/16"	Hand Router, Router Table	Wood, Particleboard, Plywood	35475A73	00000


							Bullnose with Beading Corner Style







											Straight Flutes

											7/8"	1/8"	9/16"	1/4"	2 1/8"	Ball Bearing	1/2"	2	1/8"	Hand Router, Router Table	Wood, Particleboard, Plywood	6623N13	00000


											1 1/8"	3/16"	11/16"	1/4"	2 1/4"	Ball Bearing	5/8"	2	3/16"	Hand Router, Router Table	Wood, Particleboard, Plywood	6623N14	00000
											1 1/4"	1/4"	3/4"	1/4"	2 5/16"	Ball Bearing	5/8"	2	1/4"	Hand Router, Router Table	Wood, Particleboard, Plywood	6623N15	00000


											Cove Corner Style







													Straight Flutes

	7/8"												1/4"	9/16"	1/4"	2"	Ball Bearing	3/8"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	29655A11	00000


	1 1/8"	3/8"											9/16"	1/4"	2"	Ball Bearing	3/8"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	29655A12	00000
	1 3/8"	1/2"											5/8"	1/4"	2 1/8"	Ball Bearing	3/8"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	29655A13	00000


	Wavy Corner Style







															Straight Flutes

															1 1/4"	—	5/8"	1/4"	2 1/4"	Ball Bearing	1/2"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	29875A31	00000


			Roman Ogee Corner Style







															Straight Flutes

															1 1/8"	5/32"	9/16"	1/4"	2"	Ball Bearing	3/8"	2	—	Hand Router, Router Table	Wood, Particleboard, Plywood	35495A11	00000

Flush-Trimming and Chamfering Router Bits

Create straight and chamfering cuts on countertops or other laminate material without changing bits. For flush trimming, hold the bit at a height where only the straight cutting edge contacts the workpiece. For chamfering cuts, use the angled cutting edge. A ball-bearing pilot guides the bit for accurate cuts and produces low friction for smooth operation. The straight flutes quickly remove material and leave a rough finish. These bits cannot make plunge cuts, so they're best for operations where the peripheral teeth do most of the work such as trimming, contouring, and finishing.

Uncoated Carbide-Tipped High-Speed Steel


Chamfering Cut Style	Flush-Trimming Cut Style

Carbide-tipped high-speed steel bits provide a longer tool life and faster cutting speeds than standard high-speed steel bits.

	Shank Dia.	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On		Each
Chamfering Cut Style and Flush-Trimming Cut Style







	Straight Flutes

	1/2"	3/8"	22°	1/4"	2"	Ball Bearing	1/2"	2	Hand Router	Laminate	35465A63	000000

Uncoated Micrograin Carbide


Chamfering Cut Style	Flush-Trimming Cut Style

Micrograin carbide bits provide superior wear resistance, long tool life, and a cleaner finish than bits made of other materials.

	Shank Dia.	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On		Each
Chamfering Cut Style and Flush-Trimming Cut Style







	Straight Flutes

	3/4"	3/8"	9°	1/4"	2"	Ball Bearing	5/8"	3	Hand Router, Router Table, CNC Machine	Laminate	6589N12	000000


	7/8"	3/8"	22°	1/4"	2"	Ball Bearing	5/8"	3	Hand Router, Router Table, CNC Machine	Laminate	6589N11	00000

Decorative Panel Router Bits

Remove large amounts of material on flat surfaces with these bits to create raised panels with decorative edges. They are often used in cabinetry and furniture making. Since they’re made from solid carbide, they have a longer tool life and faster cutting speeds than high-speed steel bits.

Uncoated Carbide


Roman Ogee Panel Groove	Traditional Sloped Panel Groove

Ball Bearing—Ball-bearing pilots guide the bit for accurate cuts and produce less friction than solid pilots for smoother operation. For bits without a pilot, guide your router along a straight edge when hand routing to make accurate cuts.

	Shank Dia.	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On		Each
Roman Ogee Panel Groove







	Straight Flutes

	2 1/2"	3/4"	2 1/2"	1/2"	2 13/16"	Ball Bearing	1/2"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	6446N12	0000000


	3 3/8"	7/8"	3 3/8"	1/2"	2 29/32"	Ball Bearing	1/2"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	6446N13	000000


	Traditional Sloped Panel Groove







					Straight Flutes

					1 5/8"	1/2"	1 5/8"	1/2"	2 1/2"	Ball Bearing	1/2"	2	Hand Router, Router Table, CNC Machine	Wood, Particleboard, Plywood	6446N15	00000

Router Bits for Grooves

Carve grooves in wood and laminate. These bits have straight flutes that quickly remove material, leaving a rough finish. Made of carbide-tipped high-speed steel, they provide a longer tool life and faster cutting speeds than standard high-speed steel bits.

Uncoated Carbide-Tipped High-Speed Steel


V-Shaped Grooves (Top Pilot)	Rounded Grooves (Top Pilot)

V-Shaped Grooves

(Top Pilot)

Rounded Grooves

(Top Pilot)

Top Pilot—Bits with a top pilot let you flush trim, cutting a lower layer of the workpiece flush to the layer above. They can also be used for pattern cutting with a template. They have a ball-bearing pilot that guides the bit for accurate cuts. All other bits do not have a pilot, so guide your router along a straight edge when hand routing to make accurate cuts.

	Shank Dia.	Overall Lg.	Router Bit Pilot Type	Ball Bearing Pilot Dia.	No. of Flutes	For Tool Type	For Use On		Each
V-Shaped Grooves (Top Pilot)







	Straight Flutes

	1/2"	1/2"	90°	1/4"	2"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	3324N111	000000


	Rounded Grooves (Top Pilot)







					Straight Flutes

					1/2"	3/8"	—	1/4"	2"	Ball Bearing	1/2"	2	Hand Router, Router Table	Wood, Particleboard, Plywood, Laminate	6559N11	00000