Ball bearings operate with less friction than other bearings, so they can run at higher speeds.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Keep shafts, such as those with a shoulder, clear of the mounting surface. These bearings have a higher mounting base that gives them more space to the mounting surface than standard mounting bases.

Meeting IP69K for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants.

Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.

A bolt in each corner makes for a secure, even hold.

Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants.

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with two-bolt flange.

Use these bearings in corrosive environments and under water.

An elongated mounting hole on one side of the flange lets you adjust the position of these bearings without having to remove your shaft.

Used in food, beverage, pharmaceutical, and chemical plants, these mounted ball bearings are IP69K certified for washdown environments and have a two-bolt flange for mounting.

With all three mounting holes on one side, you can position the bearing above or below the mounting surface.