Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist these bumpers into a threaded hole.

These bumpers withstand temperatures up to 300° F, which is twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist them into a threaded hole.

Install these bumpers with screws. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

These bumpers are at a 90° angle to protect corners on equipment, walls, and docks from damage caused by carts, vehicles, and other moving objects. Install them with screws.

The stem on these bumpers compresses to fit into tight holes. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Mount these bumpers on a threaded stud. All are reinforced with a steel core or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines.

These bumpers withstand temperatures up to 300° F, which is at least twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount them on a threaded stud.

Select these bumpers for applications that require specific load capacities. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing. They're comparable to Bumpon bumpers.

Keep bumpers of various shapes, materials, and mounting styles on hand to solve whatever problems arise.

Install with a few taps of a hammer. In addition to protecting soft materials such as wood, fiberboard, and plastic, these bumpers are commonly used on table and chair legs to safeguard floors.

Press these silencers into a drilled hole in the door frame. Doors close firmly yet quietly with these silencers. They also eliminate the rattling of doors against their frames.

These stops have a metal stem and base for strength and durability. Use them to protect walls from doors in high-traffic applications.

Designed to withstand impact in high-traffic areas, these stops have an anchor that mounts in a hole and sets with grout. Install them in concrete floors to protect walls from large doors in warehouses and manufacturing areas.

Keep sliding doors and panels from damaging walls and door frames.

Simply screw these bumpers into baseboards with the attached self-tapping wood screw to prevent doors from damaging walls.

Protect walls and other surfaces from impact.

The guards in this system have a metal core for added strength and stability. Combine corner guards and surface guards to create a system that protects walls and equipment from impact and wear. Often used in warehouse and manufacturing areas, these systems protect against damage from carts and vehicles.

Vibrant colors create a visual alert to draw attention to equipment and obstructions. These guards protect corners on walls, posts, shelving, and other surfaces from damage.

Sample multiple sizes and styles of rubber trim.

This trim withstands temperatures up to 450° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of rubber, it resists abrasion better than plastic trim.

Guard the edges of panels, signs, glass, and other surfaces in food plants from frequent bumps and scrapes. This trim is FDA compliant, so it’s safe to directly touch food.

Keep grommets of various sizes on hand to solve whatever problems arise.

Cut the thin layer of rubber in the center of these grommets to create custom IDs to securely hold and protect wire, cable, and cords. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration. Also known as webbed grommets.

Create a tight seal around wire, cable, and cords with these grommets to keep out dust, debris, and moisture.

Cut the center of these grommets with a utility knife to create custom IDs. The two‐piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture.

Create a sanitary seal on through-wall piping, tubing, and cables in food-, cosmetic-, and pharmaceutical-processing areas.

A two-piece design makes these mounts easier to install than one-piece mounts.

Specifically designed for light vertical loads, these mounts buckle to protect lightweight equipment such as small fans and pumps from vibration.

Designed for tight spaces such as inside machinery, these mounts fit into a cutout, so they so they have a low top profile.

An interlocking steel frame in these mounts prevents collapse, even if the rubber fails.

Spring action provides significant isolation of vibration and noise.

Well-suited to moist environments, these mounts have a stainless steel plate for excellent corrosion resistance.

Made of nitrile rubber, these mounts are oil resistant for use in compression load applications with punch presses, milling machines, grinders, and air compressors.

A two-piece design simplifies installation and requires less clearance than one-piece mounts.

Higher deflection ratings translate to greater vibration and shock isolation.

Thread these mounts into machinery to level them on uneven floors in sanitary environments such as food-processing areas.

A two-piece design requires less clearance than one-piece mounts and simplifies installation—raise your machine just enough to slide the base underneath, then insert the stud from above.

Made of neoprene rubber, these feet are a good choice for use in oily environments.

Great as nonslip feet, thread these rubber suction cups to the bottom of your lightweight equipment.

In addition to having a wider temperature range than our other ribbed vibration-damping bushings, these have excellent weather resistance.

Use these in place of normal washers to damp vibration and cushion your joint.

In addition to having a wider temperature range than our other vibration-damping grommets, these have excellent weather resistance.

Black-oxide steel has a dull shine for areas where appearance is a concern.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Well-suited to damp environments, these mounts have a stainless steel nut for excellent corrosion resistance.

Made of 303/304 stainless steel, these mounts resist corrosion from water and most chemicals.

Made of yellow zinc-plated steel, these metric leveling mounts are more corrosion resistant than nickel-plated steel leveling mounts.

Nickel-plated steel has some corrosion resistance.

Punch-out holes in the base let you bolt down these mounts to keep your equipment stationary.

Punch-out holes in the base let you bolt down these metric mounts to keep your equipment stationary.

Well-suited to damp environments, these mounts have a stainless steel stud and nut for corrosion resistance.

These bumpers are fiber-reinforced for more impact resistance than vehicle-mount bumpers.

For the heaviest loads, these springs have more than double the load capacity of High-Load Fastener-Mount Compression Springs. Secure by inserting a fastener through the hole at the base.

Flanges on the ends of these springs provide a flat mounting surface.

These flat rubber springs handle heavy loads, similar to Belleville disc springs, and resist oxidation, oil, and abrasion.

Isolate vibration and absorb shock from moving equipment, even with changing loads. Also for leveling and lifting, use compressed air to adjust air springs to the height and force required for your application.

To provide more protection from the elements than dock door seals, these shelters wrap around trailers.

Made of durable material, these washers resist wear from rubbing and scraping surfaces.

These washers surpass other rubber washers when it comes to withstanding oil, grease, and fuel.

These polyurethane washers withstand wet conditions as well as sunlight, ozone, and some chemicals.