Made of FDA-listed materials, these sheets and strips are for use with food.

FDA compliant for direct contact with food, these balls are often used to clean screens in vibrating sifters in food, beverage, and other sanitary environments. You can also use them as seals in pumps and check valves.

Temperatures as low as –70° F have no effect on these fluorosilicone sheets and strips.

Twist these bumpers into a threaded hole. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

Good for electroplating, paint baking, and powder-coating applications, these plugs withstand temperatures up to 570° F. All are tapered to fit a range of hole diameters.

Designed with a flange, these plugs protect countersunk holes during anodizing, electroplating, paint baking, and powder-coating applications. All withstand temperatures up to 600° F. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

A time-saving alternative to threaded plugs, these plugs press in place and have an ergonomic pull tab for quick and easy removal. Use them to temporarily protect holes in objects from contaminants during storage, painting, and light fabrication.

Flexible even at temperatures as low as -80° F, these fluorosilicone O-rings will keep your fittings free from leaks. They’re often used on fuel and coolant hose because fluorosilicone resists many chemicals, including ethanol and ethylene glycol.

Inherently sticky, this silicone gel material conforms to irregular surfaces and stays in place for an effective moisture barrier.

In addition to oil, these blended aramid fiber/Buna-N rubber gaskets resist water and aliphatic hydrocarbons such as ethylene.

In addition to oil, these Buna-N gaskets resist water and salts.

If a piece wears off, fragments as small as 1 mm can be picked up by a metal-detection system to prevent contamination of your process line.

Also known as Ethafoam.

Similar to a sponge, this open-cell foam absorbs and holds up to 30 times its weight in liquid.

Compared to our standard UHMW polyethylene, these sheets and bars hold up better to scuffs and scrapes in high-speed, high-precision, and high-impact applications—such as conveyor equipment, chute liners, and machine guards. Also known as Tivar HPV.

The addition of glass fibers makes this material more abrasion resistant than standard UHMW. It’s also known as Tivar 88.

If a chip of this material breaks off, it can be located by metal detectors to reduce contamination risks.

Use these cast nylon 6 rods to make sheaves, bushings, and pulleys. All withstand higher temperatures and are easier to machine than standard nylon 6/6 rods.

Also known as starboard, these sheets and bars won’t degrade when exposed to salt water, humidity, and UV light.

The combination of high strength and water resistance, along with a variety of color choices, makes this opaque cast acrylic useful for outdoor signs and containers. It's also known as Lucite and Plexiglas® Acrylic.

Common in food and pharmaceutical plants, these PEEK sheets and bars help you identify contaminated batches.

Multiple colors allow you to color-code your line for easy identification.

This multiple-line tubing holds together on its own, so there's no need for cable ties or tape.

Designed for use in welding applications, this tubing has multiple layers of material and is specially formulated to self-extinguish.

Silicone with a metal additive, this tubing routes liquids and ingredients as hot as 390° F through your food plant and is caught by metal detectors if a piece falls into your line.

This tubing is soft enough to handle continuous bending and flexing, yet tough enough to resist tearing and abrasion.

Reduce the strain and fatigue of standing while working in food-processing and pharmaceutical plants, as well as in clean rooms.

These silicone compounds offer good resistance to acids, oils and salt water.