Attach to upright rack shelving to block off aisles.

To make a complete unit, team one or more belt barriers with a wall receptacle or receiver post.

Remove the tops on these three-post barriers to fill the bases with sand or pea gravel for added stability.

Links split in half and snap back together. Use to connect two lengths of chain.

Combine rails, posts, and gates to make a custom guardrail system.

Start with two bases and then stack rails to the desired height.

These guardrails sit low to the ground to protect racks and equipment without restricting access.

These bollards flex slightly when bumped by a vehicle to prevent dents and dings.

Restrict and grant access to an area—these bollards act as a strong physical barrier and have a hinge to fold flat against the ground in either direction.

Prevent damage to dock doors using these bright yellow guards, which act as a barrier and catch the eye of vehicle operators.

You can fill these with water for added stability and drain when not in use for easy transport.

The barricade with prismatic bands is high visibility for use in heavy traffic and low-light areas.

Gates collapse for easy transport and storage.

No need to shut these gates behind you—springs automatically do it for you.

Combine bases, rails, gates, and toeboards to create a barrier customized to your needs. Base is weighted to allow installation without drilling holes.

Connect rails and posts with included slip-on fittings to quickly assemble a railing.

Create a temporary barrier around hazards such as open manholes.

Modular mix-and-match components allow flexible railing configurations.

Slip these posts and rails together for a complete railing—no fittings required.

Combine posts, panels, and doors to create a barrier around equipment.

Compact in size, these guards can be mounted directly to a machine or workbench. Panels are framed in aluminum T-slotted extrusions to provide multiple points of attachment for other components.

Move these panels to partition workspaces and separate workers.

Create a barrier between customers and employees to stop the spread of illness.

Mount near a machine to deflect debris away from the immediate area. Guards swing in and out as needed.

Mount near a machine to deflect debris away from the immediate area. Guards bend and twist in any direction.

More flexible and portable than glove boxes, these glove bags are temporary enclosures that protect you while you work with hazardous or unknown material and isolate the material from outside air and moisture.

Use this lightweight fencing to temporarily limit access to areas of your facility.

Also known as chicken wire and poultry netting, this fencing is a flexible alternative to metal welded-wire fencing.

Made of finely knit corrosion-resistant mesh, this highly pliable fencing is often used to secure insulation blankets, covers, and jackets.

A popular choice for controlling sand and snow drifts.

Replace the arms of motor-powered parking gates.

Light beams travel up to 32 ft. between the transmitter and receiver.

Safely transmit power to switches and sensors in highly volatile areas. Commonly used in refineries, power plants, and wastewater-treatment facilities, these barriers use a NAMUR signal to reduce the current and voltage coming from your power supply—preventing sparks and ignition.

Often used with machine guards, these switches mount to a door frame.

Hooks on the back of these holders allow you to hang them on a nail or screw.

Fasten these holders to a surface with screws or nails.

Wrap the strap of these holders around an object with a 1" dia. or less and secure with the magnetic snaps.

Organize your signs and documents by color.

Due to the welded-wire construction these panels require fewer nuts and bolts, and won’t unravel if you need to cut around a pipe or other obstruction.

These complete partitions include everything you'll need.

Also known as safety scales, these gauges confirm that the gaps between the grinding wheel and the tool rest and tongue comply with OSHA and ANSI requirements.

Draw attention to important signs—these holders have a bright border.

Insert a sign, then snap the sides closed.

Slide a sign into the side of these holders.

The sleeve protects signs and allows you to swap material in and out.

View signs or documents on both sides of these holders.

These oversized sign holders fit signs up to 36" high. They're often used to display signs on pathways, indoors and out.

Collapse these signs when not in use. They have the same message printed on all three sides to help prevent accidents around slippery floors.

These tags are stamped with "SEALED" and are numbered consecutively, starting with a random number.

Specify a message and starting number.

Specify a message and starting number.

Create custom-length seal tags using locks and wire.

These tags are stamped with "SEALED" and a random number.

Specify a message and starting number.

Squeeze the handles together to seal locks on tamper-seal tags.

Push these tags through hasps on cabinets, truck trailers, cargo containers, and other heavy duty equipment. With an average breaking strength of 3,000 lbs., they are more secure than other tamper-seal tags.

When tape is removed, a red layer stays behind to indicate the package has been opened.