Compact in size, these guards can be mounted directly to a machine or workbench. Panels are framed in aluminum T-slotted extrusions to provide multiple points of attachment for other components.

These panels lift on and off their posts in seconds, so you can protect machinery while providing access for maintenance.

These guardrails sit low to the ground to protect racks and equipment without restricting access.

Start with two bases and then stack rails to the desired height.

This solid plastic bollard resists oil and chemicals and won’t rot from outdoor exposure.

These bollards flex slightly when bumped by a vehicle to prevent dents and dings.

Restrict access to an area of your facility.

Keep your overhead-door track from being damaged by forklifts and other vehicles.

Mount near a machine to deflect debris away from the immediate area. Guards bend and twist in any direction.

Visible at a distance because of their bright yellow frames, these clear panels safely section off workspaces and create distance between workers.

Create a barrier between customers and employees to stop the spread of illness.

Wrap these guards around grip pullers, presses, and other moving equipment to protect yourself from flying debris.

Hinges allow you to fold these panels into the desired configuration while the clear screens let workers see and be seen.

Shield workers while allowing them to see and be seen.

The vinyl coating on these panels withstands oil.

Lightweight and flexible enough to roll up and carry, these panels are wire reinforced so they stand on their own.

Shield forklift operators from rain, snow, wind, and dust while keeping a clear, unobstructed view for safety. These covers are sized to fit most forklift cabs.

Hinges allow you to fold these panels into the desired configuration and the clear panels let workers see and be seen.

Connect rails and posts with included slip-on fittings to quickly assemble a railing.

Combine bases, rails, gates, and toeboards to create a barrier customized to your needs. Base is weighted to allow installation without drilling holes.

Create a temporary barrier around hazards such as open manholes.

A hook on each end lets you join multiple barriers to create the length and configuration you need.

Combine components to create a railing. They are sized to fit together and mount on floors and walls.

A hydraulic arm allows these gates to close smoothly.

Keep personnel safe when transferring material between areas with different floor heights.

Attach to upright rack shelving to block off aisles.

Instead of a post, use these rings to hang chain between metal surfaces.

Links split in half and snap back together. Use to connect two lengths of chain.

Remove the tops on these three-post barriers to fill the bases with sand or pea gravel for added stability.

You can fill these with water for added stability and drain when not in use for easy transport.

These rails have continuous T-slots for attaching fittings. Use this versatile framing to configure machine guards, enclosures, carts, and workstations.

Add rollers to T-slotted framing to create flow rails, ball transfer tables, and other manual conveyors.

Screw and nut sets or nuts secure brackets and other accessories to rails.

Slide drawers, panels, and doors with these tracks and rollers.

Use hinges to add doors, lids, and machine guards to T-slotted framing.

For repetitive workholding, mount these clamps to T-slotted framing to hold and release parts.

Attach sensors, tubes, and other components to T-slotted framing rails and structures.

Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.

Route wires, cables, and tubing along T‐slotted rails.

Align and drill accurate holes in T-slotted rails with these reusable templates.

Distribute compressed air, hydraulic fluid, or water from a single supply to multiple locations.

Pivots provide smooth motion at the junction between two T-slotted rails.

Add electrical outlets to workstations with these outlet strips that mount on T-slotted rails.

Create posts of varying lengths.

Brackets mount on the outside of strut channel to allow trolley movement.

Provide a stable, nonmarring base for strut channel legs.

Serrated grooves grip the lip of the channel.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

Position two strut channels at a 30° to 60° angle, then tighten the bolt to secure.

A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.

Keep a rod securely centered against the strut channel.

This welded, one-piece strut channel combines two strut channels back-to-back.