When you need to achieve a more consistent finish, choose nylon mesh sanding rolls over paper- or cloth-backed rolls.

A cushioned layer lets you apply more even sanding pressure on your workpiece, creating finer and more consistent finishes.

These rolls are coated with aluminum oxide, which is the most common abrasive material and hard enough to sand steel and wood.

A thicker, heavier construction than standard rolls withstands tough sanding.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

These rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

The sharp abrasive on these rolls sands hard metals like stainless steel, nickel, and iron.

Sanding rolls with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina rolls because of their sharp, outwardly pointed grit.

One of the sharpest abrasives, the silicon carbide on these rolls sands aluminum, copper, plastic, and rubber with ease, generating minimal heat to prevent material buildup.

Dozens of vacuum holes throughout these rolls let a sander suck up dust and debris to prevent buildup on your sandpaper. They’re coated with the most common abrasive, aluminum oxide, which is hard enough to sand steel and wood.

Holes allow dust removal when used with a vacuum sander to prevent buildup of debris on the abrasive surface.

This gauze creates a smooth finish and won't snag or leave strands on your work surface.

Lighter and softer than other corrosion-resistant metal wools, aluminum also won't leave behind small fibers that cause rust. This cut-to-length wool is good for cleaning and finishing aluminum.

This nonsparking, gauze-like mesh is good for a range of tasks, from surface cleaning to rust removal. It won't snag or leave strands on your work surface.