McMaster-Carr logo
    Filter by
    Diameter
    Attribute Image
    Quick-Change Connection Type
    For Use On
    Disc Diameter
    Nylon Mesh Grade
    Number of Pieces
    Quick-Change Connection Material
    Abrasive Backing Material
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    23 Products

    Quick-Change Sanding Disc Assortments

    Image of Product. Front orientation. Sanding Discs. Quick-Change Sanding Disc Assortments, Quick-Change-Connector Mount, 20 Pieces.
    Image of Product. Front orientation. Sanding Discs. Quick-Change Sanding Disc Assortments, Quick-Change-Connector Mount, 153 Pieces.

    Quick-Change-Connector Mount

    20 Pieces

    Quick-Change-Connector Mount

    153 Pieces

    Image of Product. TR. Top orientation. TR. Discs, Sold as Assortments.
    Image of Product. TP. Top orientation. TP. Discs, Sold as Assortments.

    TR

    TP

    Tackle a range of sanding jobs. These assortments include a variety of grits for everything from heavy material removal to finishing. The connector on the back lets discs swap out in seconds, so you can get right back to work. Choose the connection style that matches your tool or backup pad.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    TP Style Quick-Change Connector—These assortments are larger than TR style, with two abrasive materials and the compatible backup pads.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Zirconia Alumina Abrasive—A step up from aluminum oxide. Zirconia alumina's tough grains remove material faster and last longer but require heavy pressure to cut properly.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Includes
    No. of
    Pieces
    Abrasive Material
    Abrasive Backing
    Material
    Mfr. Equiv. Model
    For Use On
    For Use With
    Grit
    Each
    TR Style Quick-Change Connector
    1 1/2"5 each 36, 60, 80, 120-grit Discs20Aluminum OxideCloth3M RolocSteel, WoodGrinders for Bits and Burs36, 60, 80, 1206601N17000000
    2"5 each 36, 60, 80, 120-grit Discs20Aluminum OxideCloth3M RolocSteel, WoodGrinders for Bits and Burs36, 60, 80, 1206601N1800000
    3"5 each 36, 60, 80, 120-grit Discs20Aluminum OxideCloth3M RolocSteel, WoodGrinders for Bits and Burs36, 60, 80, 1206601N1900000
     
    TP Style Quick-Change Connector
    1", 2", 3"5 each 60, 100-grit 2" Diameter Discs
    20 each 80, 120-grit 2" Diameter Discs
    25 each 40, 80-grit 1" Diameter Discs
    25 each 50, 100-grit 3" Diameter Discs
    Plastic case
    Three Backup Pads (one each in 1", 2", and 3" diameters) with 1/4" Shank    		153Aluminum Oxide, Zirconia AluminaClothMerit Power-Lock Type ISteel, WoodGrinders for Bits and Burs40, 50, 60, 80, 100, 1206601N11000000
     
    Backup Pads
    Image of Product. Front orientation. Backup Pads. Quick-Change-Connector Mount, Sold as Assortments.
    Image of Product. Front orientation. Backup Pads. Quick-Change-Connector Mount, Sold as Assortments.
    Use these pads to attach a sanding disc to a compatible tool.
    Soft—Pads rated soft conform to contoured surfaces and are good for polishing and finishing.
    Medium—Pads with medium hardness provide enough support for heavy material removal but are flexible enough for contouring and shaping.
    Hard—Pads rated hard hold their shape as you apply pressure and are the best option for aggressive material removal.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Shank
    Dia.
    Max. Speed,
    rpm
    Density
    1-9
    10-49
    50-Up
    TR Style Quick-Change Connector
    1 1/2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A91000000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Soft6879N16000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Medium46325A92000000000000000
    2"3M Roloc, Norton Speed-Lok TR1/4"30,000Hard6879N15000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Medium46325A93000000000000000
    3"3M Roloc, Norton Speed-Lok TR1/4"20,000Hard6879N17000000000000000
     
    TP Style Quick-Change Connector
    1"Merit Power-Lock Type I, Norton TY Power-Lock Type I1/4"40,000Medium47045A8200000000000000
    2"Merit Power-Lock Type I, Norton TY Power-Lock Type I1/4"30,000Medium47045A52000000000000000
    3"Merit Power-Lock Type I, Norton TY Power-Lock Type I1/4"20,000Medium47045A53000000000000000
     

    Nylon Mesh Quick-Change Sanding Disc Assortments

    Image of Product. Front orientation. Sanding Discs. Nylon Mesh Quick-Change Sanding Disc Assortments.
    Image of Specification. Front orientation. TR. Surface Conditioning, Sold as Assortments, Discs.
    Image of Specification. Front orientation. TS. Surface Conditioning, Sold as Assortments, Discs.

    TR

    TS

    Produce consistent finishes with a variety of discs and backup pads. Also known as non-woven or surface-conditioning discs, they have a clog-resistant nylon mesh backing and come in abrasives from coarse to very fine. They compensate for uneven sanding pressure, so they’re good for everything from heavy rust removal to paint prep. The connector on the back lets you swap out discs in seconds. Choose the connection style that matches your tool or backup pad.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Dia.
    Includes
    No. of
    Pieces
    Abrasive
    Material
    Mfr. Equiv. Model
    For Use On
    For Use With
    Nylon Mesh Grade
    Each
    TR Style Quick-Change Connector
     
    For Rough Finish, For Smooth Finish, For Extra-Smooth Finish
    2", 3"24 Discs (4 each of Coarse, Medium, and Very Fine in 2" and 3" Diameters)
    Two Backup Pads (one each in 2" and 3" diameters) with 1/4" Shank    		26Aluminum Oxide3M Roloc, Norton Speed-Lok TRSteel, WoodGrinders for Bits and BursCoarse, Medium, Very Fine4799A92000000
     
    TS Style Quick-Change Connector
     
    For Rough Finish, For Smooth Finish, For Extra-Smooth Finish
    2", 3"24 Discs (4 each of Coarse, Medium, and Very Fine in 2" and 3" Diameters)
    Two Backup Pads (one each in 2" and 3" diameters) with 1/4" Shank    		26Aluminum Oxide3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAttSteel, WoodGrinders for Bits and BursCoarse, Medium, Very Fine4799A9100000
     

    Nylon Mesh Hook and Loop Sanding Disc Assortments

    Image of Product. Front orientation. Sanding Discs. Nylon Mesh Hook and Loop Sanding Disc Assortments.
    Produce consistent finishes with a variety of discs and the backup pads. Also known as non-woven or surface-conditioning discs, they have a clog-resistant nylon mesh backing and come in abrasives from coarse to very fine. Discs compensate for uneven sanding pressure, so they’re good for everything from heavy rust removal and deburring to blending and paint prep. The hook-and-loop backing lets you switch grits without waste, unlike adhesive-backed discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Nylon Mesh Grade—Use coarser grade discs for heavy cleaning, stripping, and deburring. Finer grades remove material more slowly, so they're best for gentle cleaning, blending, and finishing.
    Dia.
    Includes
    No. of
    Pieces
    For Use On
    For Use With
    Nylon Mesh Grade
    Each
    Aluminum Oxide Abrasive
    2", 3"24 Discs (4 each of Coarse, Medium, and Very Fine in 2" and 3" Diameters)
    Two Backup Pads (one each in 2" and 3" diameters) with 1/4" Shank    		26Steel, WoodGrinders for Bits and BursCoarse, Medium, Very Fine4799A88000000
     

    Backup Pads with Shank for Quick-Change Sanding Discs

    Image of Product. Front orientation. Backup Pads. Backup Pads with Shank for Quick-Change Sanding Discs, TS.

    TS

    Secure the shank on one of these pads into the collet or chuck of your tool and attach the quick-change connector on the back of compatible sanding discs to the pad.
    TS
    Image of Product. Front orientation. Backup Pads. Backup Pads with Shank for Quick-Change Sanding Discs, TS.
    Image of Attribute. Front orientation. ZoomedIn view. Contains Annotated, MultipleImages. TS. Backup Pads with Shank for Quick-Change Sanding Discs.
    Medium—Pads with medium hardness provide enough support for heavy material removal but are flexible enough for contouring and shaping.
    Each
    For Disc
    Dia.
    Mfr. Equiv. Model
    Max. Rotation
    Speed, rpm
    Shank
    Dia.
    Hardness
    Rating
    1-9
    10-49
    50-Up
    3/4"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt40,0001/4"Medium4701A770000000000000000
    1"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt40,0001/4"Medium4701A750000000000000
    1 1/2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt30,0001/4"Medium4701A7100000000000000
    2"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt30,0001/4"Medium4701A7200000000000000
    3"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt20,0001/4"Medium4701A73000000000000000
    4"3M TSM, Norton Speed-Lok TS, Standard Abrasive SocAtt15,0001/4"Medium4701A74000000000000000

    Contact Adhesives for Sanding Abrasives

    Image of Product. Front orientation. Contact Adhesives. Contact Adhesives for Sanding Abrasives.
    Stick sanding discs or sheets to the backup pad on your sander. Also known as disc cement, these adhesives are strong enough to hold discs in place during aggressive sanding, but flexible enough that you can peel them off when you’re done. They work with either paper- or cloth-backed discs, but only use them on backup pads made for pressure-sensitive adhesive (PSA) discs or sheets.
    Container
    For Abrasive Backing
    Material
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, min.
    Shear
    Strength
    Cure Type
    Consistency
    Color
    Each
    Fabric, Paper32Can1030Not RatedRoom TemperatureThick LiquidOff-White8641N11000000
     
    back to top