Filter by
Diameter
Mount Type
Abrasive Material
For Sanding
Material
For Use With
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
DFARS Specialty Metals
Disc Shape
Export Control Classification Number (ECCN)
Form
For Finish
Performance
Adhesive-Back Sanding Discs
 |
Press these discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.
Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
Zirconia Alumina Abrasive—A step up from aluminum oxide. Zirconia alumina's tough grains remove material faster and last longer but require heavy pressure to cut properly.
Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
Dia. | Abrasive Backing Material | For Use On | For Use With | Choose a Grit | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|
Aluminum Oxide Abrasive | |||||||||
For Rough Finish | |||||||||
| 15" | Cloth | Steel, Wood | Stationary Disc Sanders | 36, 40, 50, 60, 80 | 5 | 4700A811 | 000000 | ||
For Smooth Finish | |||||||||
| 15" | Cloth | Steel, Wood | Stationary Disc Sanders | 100, 120, 180 | 5 | 4700A812 | 00000 | ||
For Extra-Smooth Finish | |||||||||
| 15" | Cloth | Steel, Wood | Stationary Disc Sanders | 240, 400 | 5 | 4700A813 | 00000 | ||
Zirconia Alumina Abrasive | |||||||||
For Rough Finish | |||||||||
| 15" | Cloth | Steel, Wood | Stationary Disc Sanders | 36, 40, 50, 60, 80 | 1 | 47125A791 | 00000 | ||
For Smooth Finish | |||||||||
| 15" | Cloth | Steel, Wood | Stationary Disc Sanders | 120 | 1 | 47125A86 | 00000 | ||
Clog-Resistant Adhesive-Back Sanding Discs
 |
Spend more time sanding and less time replacing clogged discs. A slick coating prevents dust and debris buildup on the abrasive surface. Press these discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.
Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
Floor Sanding Discs
 |
Smooth out floors using a commercial floor-buffing machines. The slotted hole makes installation easy—just line up the center of the disc with your machine and push into place.
Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
Paper Abrasive Backing—Good for high-volume sanding where you'll go through lots of discs.
Silicon Carbide Abrasive—The best choice for sanding concrete floors. You can also use them on wood floors, but they’ll wear out quicker than ceramic alumina discs.
Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
Center Hole | Silicon Carbide Abrasive | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Grit | Abrasive Backing Material | For Use With | Style | Dia. | For Use On | Each | |||
For Rough Finish | ||||||||||
| 15" | 20 | Cloth, Paper | Floor-Buffing Machines | Slotted | 2" | Concrete, Stone, Wood | 47305A244 | 00000 | ||
