With a premium abrasive, these discs stay sharp longer than other arbor-mount discs for hard metals. Fit them over your tool’s arbor for the most stable mounting. Discs require a backup pad.

Flaps with silicon carbide abrasive cut through challenging materials and last longer than standard discs. As you work, the flaps expose new grit for steady material removal and even finishes. Mount discs onto your tool’s arbor.

Supported by nylon mesh instead of paper or cloth, these discs achieve a more consistent finish. Also known as non-woven or surface-conditioning discs, they resist clogging and flex to compensate for uneven sanding pressure. They’re good for everything from heavy rust removal and deburring to blending and paint prep. The hook-and-loop backing lets you switch grits without waste, unlike adhesive-backed discs. Pair them with a compatible sanding tool or backup pad.

Spend more time sanding and less time replacing clogged discs. A coating prevents dust and debris buildup that can wear out the abrasive. These discs fit over your tool’s arbor for the most stable mounting and require a backup pad.

Remove material quickly without sacrificing a consistent finish. These discs have precision-shaped abrasive that cuts through hard metals and reduces heat to prevent wear. The grains continually fracture to expose fresh cutting edges while keeping their engineered points and angle. Also known as non-woven or surface-conditioning discs, their nylon mesh backing resists clogging and compensates for uneven sanding pressure. They’re good for everything from heavy rust removal and deburring to blending and paint prep. The hook-and-loop backing lets you switch grits without waste, unlike adhesive-backed discs. Pair them with a compatible sanding tool or backup pad.

Prevent overheating or discoloring work surfaces. The overlapping flaps on these discs alternate between abrasive and a lubricant that minimizes heat buildup. As the top layer of abrasive wears away, a new layer is exposed so these last longer than discs without flaps. They fit over your tool’s arbor for the most stable mounting.

The abrasive on these discs is sharp and durable enough to cut hard metals without dulling quickly. Press discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.

Get the most out of your discs when sanding stainless steel and hard metals. A coating prevents dust and debris buildup that can wear out the abrasive prematurely. Discs fit over your tool’s arbor for the most stable mounting and require a backup pad.

Power through the hardest materials with silicon carbide abrasive. These discs also have tough rubber backing that handles the pressure needed to level concrete or shape stone. They mount onto your tool’s arbor and are stiff enough that you don't need a backup pad.

The coated abrasive resists buildup from soft metals and nonmetals that would clog other discs. These discs fit over your tool’s arbor for the most stable mounting and require a backup pad.

Remove material quickly without sacrificing a consistent finish. These discs have precision-shaped abrasive that cuts easily through hard metals and reduces heat to prevent wear. The grains continually fracture to expose fresh cutting edges while keeping their engineered points and angle. Also known as non-woven or surface-conditioning discs, their flexible mesh backing resists clogging and adapts to uneven sanding pressure. They're good for everything from heavy rust removal to paint prep. Discs mount onto your tool’s arbor and require a backup pad.

Remove material more quickly than other arbor-mount discs. These have precision-shaped abrasive that cuts easily and reduces heat to prevent wear. The grains continually fracture to expose fresh cutting edges while keeping their engineered points and angle. These discs fit over your tool’s arbor for the most stable mounting and require a backup pad.

With more abrasive than other flap discs for hard metals, these last 30-40% longer. The overlapping flaps expose new grit as you work for steady material removal and even finishes. Mount discs on your tool’s arbor.

The extra-sharp abrasive cuts through hard metals faster than other discs. A hook-and-loop mount lets you switch grits and avoid the waste of adhesive-backed discs, which are done after one use. Pair with a compatible sanding tool or backup pad (sold separately).

Flaps expose fresh grit as you sand hard metals for longer life than standard discs. The sharp and durable abrasive removes material evenly. Mount these discs onto your tool’s arbor.

Cut through more material in one sweep—the aluminum backing plate handles heavier pressure than standard discs. The overlapping flaps reveal new grit as you work for steady material removal and even finishes. These discs fit over your tool’s arbor for the most stable mounting.

Create a consistent finish on stainless steel and other hard metal surfaces before painting and coating. With a nylon mesh backing instead of cloth or paper, these discs resist clogging and flex to compensate for uneven sanding pressure. They’re also known as non-woven or surface-conditioning discs. Mount directly onto your tool’s arbor for stable, controlled sanding.

Achieve a more consistent finish to prepare surfaces for painting and coating. With a nylon mesh backing instead of cloth or paper, these discs resist clogging and flex to compensate for uneven sanding pressure. They’re also known as non-woven or surface-conditioning discs. Mount directly onto your tool’s arbor for stable, controlled sanding without a backup pad.

Overlapping flaps reveal new grit as you work for steady material removal and even finishes. Mount these discs directly to your tool’s arbor for the most stable, controlled sanding.

With more abrasive than standard flap sanding discs, these last 30-40% longer. Their overlapping flaps reveal new grit as you work for steady material removal and even finishes. Fit discs fit over your tool’s arbor for the most stable mounting.