McMaster-Carr logo
    Filter by
    Diameter
    Attribute Image
    Form
    For Finish
    Grit Rating
    Number of Vacuum Holes
    Abrasive Backing Material
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Disc Shape
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Vacuum Hole Diameter
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    30 Products

    Mount Type

    Performance

    Hook and Loop Vacuum Sanding Discs

    Image of Product. For Five-Hole Vacuum Sanders. Front orientation. For 5 Vacuum Holes. Hook and Loop Vacuum Sanding Discs.

    For Five-Hole

    Vacuum Sanders

    Image of Product. For Six-Hole Vacuum Sanders. Front orientation. For 6 Vacuum Holes. Hook and Loop Vacuum Sanding Discs.

    For Six-Hole

    Vacuum Sanders

    Pair these discs with a vacuum sander to keep your workspace clean. Dust is drawn away through the holes instead of floating into the air or building up on the abrasive. The hook-and-loop mount lets you switch grits without scrapping the disc, unlike adhesive-backed discs. Choose the hole configuration that matches your backup pad and vacuum sander.
    Plastic Abrasive Backing—Tear resistant and the best choice for wet sanding.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    For No. of
    Vacuum Holes
    Vacuum
    Hole Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Grit
    Pkg.
    Qty.
    Pkg.
    Aluminum Oxide Abrasive
     
    For Polished Finish
    5"57/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders1200104321A57000000
    6"67/16"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders1200104321A6700000
     
    Silicon Carbide Abrasive
     
    For Polished Finish
    5"53/8"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders1200104611A78400000
    6"63/8"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders1200104521A65100000
     
    Accessories for Sanding Discs
    Cushioning Pads
    Image of Product. Front orientation. Sanding Disc Cushioning Pads. Hook and Loop Mount.
    Dia.
    Thk.
    Material
    Color
    For No. of
    Vacuum Holes
    Each
    Clog Resistant
    5"1/2"FoamBlackAny6691N103000000
    6"1/2"FoamBlackAny6691N10400000
     
    Backup Pads
    Image of Product. Front. Front orientation. Backup Pads. Hook and Loop Mount.
    Image of Product. Back. Back orientation. Backup Pads. Hook and Loop Mount.

    Front

    Back

    For Disc
    Dia.
    For No. of
    Vacuum Holes
    Thread
    Size
    Max. Speed,
    rpm
    Each
    For Hook and Loop Mount Disc
    5"55/16"-24
    		10,0004724A94000000
    5"Any5/16"-24
    		15,0004724A10200000
    6"65/16"-24
    		10,0004724A4900000
    6"Any5/16"-24
    		15,0004724A10100000
     

    Clog-Resistant Adhesive-Back Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Clog-Resistant Adhesive-Back Sanding Discs.
    Spend more time sanding and less time replacing clogged discs. A slick coating prevents dust and debris buildup on the abrasive surface. Press these discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.
    Plastic Abrasive Backing—Tear resistant and the best choice for wet sanding.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Grit
    Pkg.
    Qty.
    Pkg.
    Aluminum Oxide Abrasive
     
    For Polished Finish
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1200104184A64000000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1200104184A5400000
     

    Hook and Loop Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Hook and Loop Sanding Discs.
    Switch from one grit to another without wasting discs. The hook-and-loop mount makes these discs reusable—unlike adhesive-back discs, which are one and done. Pair with a compatible sanding tool or backup pad.
    Plastic Abrasive Backing—A slick coating on the abrasive prevents dust and debris from building up.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Aluminum Oxide Abrasive—The most versatile and affordable abrasive we offer. Aluminum oxide is the go-to choice for general purpose sanding.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Grit
    Pkg.
    Qty.
    Pkg.
    Aluminum Oxide Abrasive
     
    For Polished Finish
    5"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1200104321A44000000
    6"PlasticSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1200104321A3400000
     
    Silicon Carbide Abrasive
     
    For Polished Finish
    2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders1200504611A68100000
    3"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders1200104611A69100000
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1200104611A72100000
    6"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1200104611A73100000
     

    Adhesive-Back Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Adhesive-Back Sanding Discs.
    Press these discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Grit
    Pkg.
    Qty.
    Pkg.
    Silicon Carbide Abrasive
     
    For Polished Finish
    2"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders1200504611A344000000
    3"ClothSteel, WoodGrinders for Bits and Burs, Portable Disc Sanders1200104611A35400000
    5"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1200104611A37400000
    6"ClothSteel, WoodPortable Disc Sanders, Stationary Disc Sanders1200104611A38400000
     

    Hook and Loop Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Front orientation. Sanding Discs. Hook and Loop Sanding Discs for Stainless Steel and Hard Metals.
    The extra-sharp abrasive cuts through hard metals faster than other discs. A hook-and-loop mount lets you switch grits and avoid the waste of adhesive-backed discs, which are done after one use. Pair with a compatible sanding tool or backup pad (sold separately).
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Grit
    Pkg.
    Qty.
    Pkg.
    Silicon Carbide Abrasive
     
    For Polished Finish
    2"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders1200504611A451000000
    3"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders1200104611A46500000
    5"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders1200104611A50800000
    6"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders1200104611A53100000
     

    Extra-Flexible Hook and Loop Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Extra-Flexible Hook and Loop Sanding Discs.
    Sand complex shapes, corners, and edges with foam discs that conform to your workpiece. The open cell material holds liquid for seamless wet sanding. Discs are also washable, so give them a quick rinse if they clog. The hook-and-loop mount lets you switch grits without waste, unlike adhesive-backed discs. Pair discs with a compatible sanding tool or backup pad.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Grit
    Each
    Silicon Carbide Abrasive
     
    For Polished Finish
    6"FoamSteel, WoodPortable Disc Sanders, Stationary Disc Sanders12004205A2600000
     

    Adhesive-Back Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Front orientation. Sanding Discs. Adhesive-Back Sanding Discs for Stainless Steel and Hard Metals.
    The abrasive on these discs is sharp and durable enough to cut hard metals without dulling quickly. Press discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Grit—The lower the grit number, the rougher the finish and the duller the appearance. The higher the grit number, the more polished the finish and the more satin or mirrored the appearance.
    Dia.
    Abrasive Backing
    Material
    For Use On
    For Use With
    Grit
    Pkg.
    Qty.
    Pkg.
    Silicon Carbide Abrasive
     
    For Polished Finish
    4"ClothIron, Nickel, Stainless Steel, Steel, TitaniumGrinders for Bits and Burs, Portable Disc Sanders1200104611A232000000
    5"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders1200104611A24100000
    6"ClothIron, Nickel, Stainless Steel, Steel, TitaniumPortable Disc Sanders, Stationary Disc Sanders1200104611A24500000
     

    Disc Sanding Discs for Stainless Steel and Hard Metals

    Image of Product. Front orientation. Sanding Discs. Disc Sanding Discs for Stainless Steel and Hard Metals, Adhesive Back.
    Image of Product. Front orientation. Sanding Discs. Disc Sanding Discs for Stainless Steel and Hard Metals, Hook and Loop.

    Adhesive Back

    Hook and Loop

    The abrasive on these discs is sharp and durable enough to cut hard metals without dulling quickly. Press discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.
    The extra-sharp abrasive cuts through hard metals faster than other discs. A hook-and-loop mount lets you switch grits and avoid the waste of adhesive-backed discs, which are done after one use. Pair with a compatible sanding tool or backup pad (sold separately).
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Dia.
    For Use On
    Abrasive
    Material
    Abrasive Backing
    Material
    For Use With
    Pkg.
    Qty.
    Pkg.
    Adhesive Back
     
    For Polished Finish
    4"Iron, Nickel, Stainless Steel, Steel, TitaniumSilicon CarbideClothGrinders for Bits and Burs, Portable Disc Sanders104521A39000000
    5"Iron, Nickel, Stainless Steel, Steel, TitaniumSilicon CarbideClothPortable Disc Sanders, Stationary Disc Sanders104521A4200000
    6"Iron, Nickel, Stainless Steel, Steel, TitaniumSilicon CarbideClothPortable Disc Sanders, Stationary Disc Sanders104521A4400000
     
    Hook and Loop
     
    For Polished Finish
    2"Iron, Nickel, Stainless Steel, Steel, TitaniumSilicon CarbideClothGrinders for Bits and Burs, Portable Disc Sanders504521A5900000
    3"Iron, Nickel, Stainless Steel, Steel, TitaniumSilicon CarbideClothGrinders for Bits and Burs, Portable Disc Sanders104521A5300000
    5"Iron, Nickel, Stainless Steel, Steel, TitaniumSilicon CarbideClothPortable Disc Sanders, Stationary Disc Sanders104521A5500000
    6"Iron, Nickel, Stainless Steel, Steel, TitaniumSilicon CarbideClothPortable Disc Sanders, Stationary Disc Sanders104521A5700000
     

    Sanding Discs

    Image of Product. Front orientation. Sanding Discs. Sanding Discs, Adhesive Back.
    Image of Product. Front orientation. Sanding Discs. Sanding Discs, Hook and Loop.
    Image of Product. For Five-Hole Vacuum Sanders. Front orientation. For 5 Vacuum Holes. Sanding Discs, Hook and Loop, For Vacuum Sanders.

    Adhesive Back

    Hook and Loop

    For Five-Hole

    Vacuum Sanders

    Switch from one grit to another without wasting discs. The hook-and-loop mount makes these discs reusable—unlike adhesive-back discs, which are one and done. Pair with a compatible sanding tool or backup pad.
    Press these discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.
    Pair these discs with a vacuum sander to keep your workspace clean. Dust is drawn away through the holes instead of floating into the air or building up on the abrasive. The hook-and-loop mount lets you switch grits without scrapping the disc, unlike adhesive-backed discs. Choose the hole configuration that matches your backup pad and vacuum sander.
    Cloth Abrasive Backing—Resist tearing and hold up to wet sanding better than paper-backed discs.
    Silicon Carbide Abrasive—Super sharp to cut quickly under light pressure. Silicon carbide is hard but brittle, so it tends to wear out sooner than other abrasives.
    Dia.
    For Use On
    Abrasive
    Material
    Abrasive Backing
    Material
    For Use With
    For No. of
    Vacuum Holes
    Pkg.
    Qty.
    Pkg.
    Adhesive Back
     
    For Polished Finish
    2"Steel, WoodSilicon CarbideClothGrinders for Bits and Burs, Portable Disc Sanders—504521A35000000
    3"Steel, WoodSilicon CarbideClothGrinders for Bits and Burs, Portable Disc Sanders—104521A3600000
    5"Steel, WoodSilicon CarbideClothPortable Disc Sanders, Stationary Disc Sanders—104521A3700000
    6"Steel, WoodSilicon CarbideClothPortable Disc Sanders, Stationary Disc Sanders—104521A3800000
     
    Hook and Loop
     
    For Polished Finish
    2"Steel, WoodSilicon CarbideClothGrinders for Bits and Burs, Portable Disc Sanders—504521A4600000
    3"Steel, WoodSilicon CarbideClothGrinders for Bits and Burs, Portable Disc Sanders—104521A4700000
    5"Steel, WoodSilicon CarbideClothPortable Disc Sanders, Stationary Disc Sanders—104521A4800000
    5"Steel, WoodSilicon CarbideClothPortable Disc Sanders, Stationary Disc Sanders, Vacuum Sanders5104521A5100000
    6"Steel, WoodSilicon CarbideClothPortable Disc Sanders, Stationary Disc Sanders—104521A4900000
     
    back to top