McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    125 Products

    Spiral-Wound Sanding Rolls

    Image of Product. Front orientation. Sanding Rolls. Spiral-Wound Sanding Rolls, Straight.

    Straight

    Image of Product. Front orientation. Sanding Rolls. Spiral-Wound Sanding Rolls, Taper.

    Taper

    Image of Product. Front orientation. Sanding Rolls. Spiral-Wound Sanding Rolls, Cone.

    Cone

    As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls. A shank adapter or tapered spindle with a shank is required (both sold separately). The most common abrasive material, aluminum oxide is hard enough to sand steel and wood. The diameter listed is for the large end of the roll.
    Straight—Straight rolls are for use in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots.
    Taper—Tapered rolls are for use on angles, corners, concave contours, funnel-shaped recesses, and other intricate shapes.
    Cone—Cone rolls are for use in holes. Unlike tapered rolls, they have a flat surface to allow for a more even finish within internal surfaces.
    Dia.
    Lg.
    Arbor Hole
    Dia.
    Max. Rotation
    Speed, rpm
    Abrasive
    Material
    Abrasive Backing
    Material
    For Use On
    For Use With
    Choose
    a Grit
    Pkg.
    Qty.
    Pkg.
    Straight
     
    For Rough Finish
    1/4"1"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    250000000000000
    1/4"1 1/2"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    250000000000000
    5/16"1"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    250000000000000
    5/16"1 1/2"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    250000000000000
    3/8"1"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    250000000000000
    3/8"1 1/2"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    250000000000000
    1/2"3/4"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    250000000000000
    1/2"1"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    250000000000000
    1/2"1 1/2"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    250000000000000
    5/8"1"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    10000000000000
    5/8"1 1/2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    100000000000000
    5/8"2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    100000000000000
    3/4"1"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    100000000000000
    3/4"1 1/2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    100000000000000
    3/4"2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    100000000000000
    1"1"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    100000000000000
    1"1 1/2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    100000000000000
    1"2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    50000000000000
     
    For Smooth Finish
    1/4"1"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    25000000000000
    1/4"1 1/2"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    250000000000000
    5/16"1"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    250000000000000
    5/16"1 1/2"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    250000000000000
    3/8"1"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    250000000000000
    3/8"1 1/2"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    250000000000000
    1/2"3/4"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    250000000000000
    1/2"1"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    250000000000000
    1/2"1 1/2"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    250000000000000
    5/8"1"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    10000000000000
    5/8"1 1/2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    100000000000000
    5/8"2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs120100000000000000
    3/4"1"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    100000000000000
    3/4"1 1/2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    100000000000000
    3/4"2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    100000000000000
    1"1"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    100000000000000
    1"1 1/2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    100000000000000
    1"2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs18050000000000000
     
    For Extra-Smooth Finish
    1/4"1"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    25000000000000
    1/4"1 1/2"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    250000000000000
    5/16"1"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    250000000000000
    5/16"1 1/2"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    250000000000000
    3/8"1"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    250000000000000
    3/8"1 1/2"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    250000000000000
    1/2"3/4"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    250000000000000
    1/2"1"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    250000000000000
    1/2"1 1/2"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    250000000000000
    5/8"1"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    10000000000000
    5/8"1 1/2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    100000000000000
    5/8"2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs320100000000000000
    3/4"1"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    100000000000000
    3/4"1 1/2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    100000000000000
    3/4"2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs320100000000000000
    1"1"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    100000000000000
    1"1 1/2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    100000000000000
    1"2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    50000000000000
     
    Taper
     
    For Rough Finish
    3/8"1"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    250000000000000
    3/8"1 1/2"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    250000000000000
    1/2"1"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    250000000000000
    1/2"1 1/2"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    100000000000000
    5/8"1"1/8"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    100000000000000
    5/8"1 1/2"1/8"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    100000000000000
    3/4"1 1/2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    100000000000000
    3/4"2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    100000000000000
    7/8"1 1/2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    80
    100000000000000
    1"1"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    100000000000000
    1"1 1/2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    100000000000000
    1"2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    50
    ,
    60
    ,
    80
    100000000000000
     
    For Smooth Finish
    3/8"1"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    250000000000000
    3/8"1 1/2"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    250000000000000
    1/2"1"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    250000000000000
    1/2"1 1/2"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    100000000000000
    5/8"1"1/8"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    100000000000000
    5/8"1 1/2"1/8"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    100000000000000
    3/4"1 1/2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    100000000000000
    3/4"2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    100000000000000
    1"1"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs120100000000000000
    1"1 1/2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs120100000000000000
    1"2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    120
    ,
    180
    100000000000000
     
    For Extra-Smooth Finish
    3/8"1"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    250000000000000
    3/8"1 1/2"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    250000000000000
    1/2"1"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    250000000000000
    1/2"1 1/2"1/8"26,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    100000000000000
    5/8"1"1/8"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    100000000000000
    5/8"1 1/2"1/8"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    100000000000000
    3/4"1 1/2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    100000000000000
    3/4"2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs240100000000000000
    7/8"1 1/2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    240
    ,
    320
    100000000000000
    1"1"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs320100000000000000
    1"2"3/16"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs320100000000000000
     
    Cone
     
    For Rough Finish
    1"1"3/16"Not RatedAluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    60
    ,
    80
    10000000000000
     
    For Smooth Finish
    1"1"3/16"Not RatedAluminum OxideFabricSteel, WoodGrinders for Bits and Burs
    100
    ,
    180
    ,
    220
    10000000000000
     
    For Extra-Smooth Finish
    1"1"3/16"Not RatedAluminum OxideFabricSteel, WoodGrinders for Bits and Burs2401000000000000
     
    Accessories for Sanding Rolls
    Required Arbors for Straight and Tapered Rolls
    Image of Product. Front orientation. Sanding Roll Arbors. Spiral-Wound Sanding Rolls.
    Shank
    Dia.
    Overall
    Lg.
    Each
    For 3/4" and 1" Lg. Rolls with 1/8" Arbor Hole Dia.
    1/8"2 3/4"000000000000
    1/4"2 1/2"00000000000
    1/4"4"00000000000
    1/4"6"00000000000
     
    For 3/4" and 1" Lg. Rolls with 3/16" Arbor Hole Dia.
    1/4"2 3/4"00000000000
     
    For 1 1/2" Lg. Rolls with 1/8" Arbor Hole Dia.
    1/8"3"00000000000
    1/4"2 3/4"00000000000
    1/4"4"00000000000
    1/4"6"00000000000
     
    For 1 1/2" Lg. Rolls with 3/16" Arbor Hole Dia.
    1/4"3"00000000000
     
    For 2" Lg. Rolls with 3/16" Arbor Hole Dia.
    1/4"3 1/2"00000000000
     
    Required Buffing and Polishing Wheel Spindles with Shank for Cone Rolls
    Image of Product. Front orientation. Buffing and Polishing Wheel Spindles. Spiral-Wound Sanding Rolls.
    Shank
    Dia.
    Taper
    Lg.
    Overall
    Lg.
    For Max.
    Arbor Hole Size
    Each
    1/4"1 1/2"2 5/8"1/4"0000000000000

    Spiral-Wound Sanding Rolls for Stainless Steel and Hard Metals

    Coated with aluminum oxide ceramic, these rolls are sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly. The abrasive grit continually fractures to produce new, sharp cutting edges. It sands faster and lasts longer than aluminum oxide but requires more force to abrade properly. As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls. A shank adapter is required (sold separately).
    Straight—Straight rolls are for use in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots.
    Taper—Tapered rolls are for use on angles, corners, concave contours, funnel-shaped recesses, and other intricate shapes. The diameter listed is for the large end of the roll.
    Dia.
    Lg.
    Arbor Hole
    Dia.
    Max. Rotation
    Speed, rpm
    Abrasive Material
    Abrasive Backing
    Material
    For Use On
    For Use With
    Choose
    a Grit
    Each
    Straight
    Image of Product. Front orientation. Sanding Rolls. Spiral-Wound Sanding Rolls for Stainless Steel and Hard Metals, Straight.
     
    For Rough Finish
    1/4"1"1/8"26,000Aluminum Oxide CeramicFabricStainless Steel, Titanium, Steel, Iron, NickelGrinders for Bits and Burs80000000000000
    3/8"1"1/8"26,000Aluminum Oxide CeramicFabricStainless Steel, Titanium, Steel, Iron, NickelGrinders for Bits and Burs
    60
    ,
    80
    000000000000
    1/2"1 1/2"1/8"26,000Aluminum Oxide CeramicFabricStainless Steel, Titanium, Steel, Iron, NickelGrinders for Bits and Burs
    60
    ,
    80
    000000000000
    3/4"1 1/2"1/8"18,000Aluminum Oxide CeramicFabricStainless Steel, Titanium, Steel, Iron, NickelGrinders for Bits and Burs8000000000000
     
    For Smooth Finish
    3/8"1"1/8"26,000Aluminum Oxide CeramicFabricStainless Steel, Titanium, Steel, Iron, NickelGrinders for Bits and Burs12000000000000
    1/2"1 1/2"1/8"26,000Aluminum Oxide CeramicFabricStainless Steel, Titanium, Steel, Iron, NickelGrinders for Bits and Burs12000000000000
     
    Taper
    Image of Product. Front orientation. Sanding Rolls. Spiral-Wound Sanding Rolls for Stainless Steel and Hard Metals, Taper.
     
    For Rough Finish
    3/8"1 1/2"1/8"24,000Aluminum Oxide CeramicFabricStainless Steel, Titanium, Steel, Iron, NickelGrinders for Bits and Burs
    60
    ,
    80
    000000000000
    1/2"1 1/2"1/8"24,000Aluminum Oxide CeramicFabricStainless Steel, Titanium, Steel, Iron, NickelGrinders for Bits and Burs
    60
    ,
    80
    000000000000
     
    For Smooth Finish
    3/8"1 1/2"1/8"24,000Aluminum Oxide CeramicFabricStainless Steel, Titanium, Steel, Iron, NickelGrinders for Bits and Burs120000000000000
    1/2"1 1/2"1/8"24,000Aluminum Oxide CeramicFabricStainless Steel, Titanium, Steel, Iron, NickelGrinders for Bits and Burs120000000000000
     
    Required Arbors for Straight and Tapered Rolls
    Image of Product. Front orientation. Sanding Roll Arbors. Spiral-Wound Sanding Rolls for Stainless Steel and Hard Metals.
    Shank
    Dia.
    Overall
    Lg.
    Each
    For 3/4" and 1" Lg. Rolls with 1/8" Arbor Hole Dia.
    1/8"2 3/4"000000000000
    1/4"2 1/2"00000000000
    1/4"4"00000000000
    1/4"6"00000000000
     
    For 1 1/2" Lg. Rolls with 1/8" Arbor Hole Dia.
    1/8"3"00000000000
    1/4"2 3/4"00000000000
    1/4"4"00000000000
    1/4"6"00000000000
     

    Spiral-Wound Sanding Roll Assortments

    Image of Product. Front orientation. Sanding Rolls. Spiral-Wound Sanding Roll Assortments.
    As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls.
    Straight rolls are for use in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots.
    Tapered rolls are for use on angles, corners, concave contours, funnel-shaped recesses, and other intricate shapes. The diameter listed is for the large end of the roll.
    No. of
    Pieces
    Arbor Hole
    Dia.
    Abrasive
    Material
    For Use On
    For Use With
    Includes
    Each
    1221/8"Aluminum OxideSteel, WoodGrinders for Bits and Burs2 1/4" Dia. Shank Adapters
    16 Rough-Finish (80 Grit) Straight Spiral-Wound Sanding Rolls—1/4" Dia. × 1" Lg.
    9 Rough-Finish (80 Grit) Straight Spiral-Wound Sanding Rolls—1/4" Dia. × 1 1/2" Lg.
    6 Rough-Finish (80 Grit) Straight Spiral-Wound Sanding Rolls—3/8" Dia. × 1" Lg.
    12 Rough-Finish (80 Grit) Straight Spiral-Wound Sanding Rolls—3/8" Dia. × 1 1/2" Lg.
    8 Rough-Finish (80 Grit) Straight Spiral-Wound Sanding Rolls—1/2" Dia. × 1 1/2" Lg.
    9 Rough-Finish (80 Grit) Tapered Spiral-Wound Sanding Rolls—3/8" Dia. × 1 1/2" Lg.
    6 Rough-Finish (80 Grit) Tapered Spiral-Wound Sanding Rolls—1/2" Dia. × 1 1/2" Lg.
    16 Smooth-Finish (120 Grit) Straight Spiral-Wound Sanding Rolls—1/4" Dia. × 1" Lg.
    12 Smooth-Finish (120 Grit) Straight Spiral-Wound Sanding Rolls—1/4" Dia. × 1 1/2" Lg.
    6 Smooth-Finish (120 Grit) Straight Spiral-Wound Sanding Rolls—3/8" Dia. × 1" Lg.
    12 Smooth-Finish (120 Grit) Straight Spiral-Wound Sanding Rolls—3/8" Dia. × 1 1/2" Lg.
    8 Smooth-Finish (120 Grit) Straight Spiral-Wound Sanding Rolls—1/2" Dia. × 1 1/2" Lg.
    00000000000000

    Long-Life Spiral-Wound Sanding Rolls

    Image of Product. Front orientation. Sanding Rolls. Long-Life Spiral-Wound Sanding Rolls.
    The premium abrasive stays sharp longer. Use these rolls in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots. As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls. A shank adapter is required (sold separately).
    Dia.
    Lg.
    Arbor Hole
    Dia.
    Max. Rotation
    Speed, rpm
    Abrasive Material
    Abrasive Backing
    Material
    For Use On
    For Use With
    Choose a Grit
    Pkg.
    Qty.
    Pkg.
    Straight
     
    For Rough Finish
    1/2"1"1/8"26,000Zirconium Oxide CeramicFabricSteel, WoodGrinders for Bits and Burs
    36
    ,
    50
    ,
    60
    ,
    80
    250000000000000
    1/2"1 1/2"1/8"26,000Zirconium Oxide CeramicFabricSteel, WoodGrinders for Bits and Burs
    36
    ,
    50
    ,
    60
    ,
    80
    25000000000000
    5/8"1"3/16"18,000Zirconium Oxide CeramicFabricSteel, WoodGrinders for Bits and Burs
    36
    ,
    50
    ,
    60
    ,
    80
    10000000000000
    5/8"1 1/2"3/16"18,000Zirconium Oxide CeramicFabricSteel, WoodGrinders for Bits and Burs
    36
    ,
    50
    ,
    60
    ,
    80
    10000000000000
    3/4"1"3/16"18,000Zirconium Oxide CeramicFabricSteel, WoodGrinders for Bits and Burs
    36
    ,
    60
    ,
    80
    10000000000000
    3/4"1 1/2"3/16"18,000Zirconium Oxide CeramicFabricSteel, WoodGrinders for Bits and Burs
    36
    ,
    50
    ,
    60
    ,
    80
    10000000000000
     
    Required Arbors for Straight and Tapered Rolls
    Image of Product. Front orientation. Sanding Roll Arbors. Long-Life Spiral-Wound Sanding Rolls.
    Shank
    Dia.
    Overall
    Lg.
    Each
    For 3/4" and 1" Lg. Rolls with 1/8" Arbor Hole Dia.
    1/8"2 3/4"000000000000
    1/4"2 1/2"00000000000
    1/4"4"00000000000
    1/4"6"00000000000
     
    For 3/4" and 1" Lg. Rolls with 3/16" Arbor Hole Dia.
    1/4"2 3/4"00000000000
     
    For 1 1/2" Lg. Rolls with 1/8" Arbor Hole Dia.
    1/8"3"00000000000
    1/4"2 3/4"00000000000
    1/4"4"00000000000
    1/4"6"00000000000
     
    For 1 1/2" Lg. Rolls with 3/16" Arbor Hole Dia.
    1/4"3"00000000000
     

    Spiral-Wound Sanding Roll Assortments for Stainless Steel and Hard Metals

    Image of Product. Front orientation. Sanding Rolls. Spiral-Wound Sanding Roll Assortments for Stainless Steel and Hard Metals.
    Keep spiral-wound sanding rolls in a mix of grits, shapes, and diameters ready to use. Coated with aluminum oxide ceramic abrasive, these rolls are sharp and dense enough to shape hard metals, such as stainless steel, carbon steel, and cast iron. The abrasive grit continuously fractures to create sharp edges as you sand, so you can sand faster and longer than with standard abrasives like aluminum oxide. As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls.
    Straight rolls are for use in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots.
    Tapered rolls are for use on angles, corners, concave contours, funnel-shaped recesses, and other intricate shapes. The diameter listed is for the large end of the roll.
    No. of
    Pieces
    Arbor Hole
    Dia.
    Abrasive Material
    Abrasive Backing
    Material
    For Use On
    For Use With
    Includes
    Each
    581/8"Aluminum Oxide CeramicFabricStainless Steel, Titanium, Steel, Iron, NickelGrinders for Bits and Burs2 1/8" Dia. Shank Adapters
    6 Rough-Finish (60 Grit) Straight Spiral-Wound Sanding Rolls—3/8" Dia. × 1 1/2" Lg.
    4 Rough-Finish (60 Grit) Straight Spiral-Wound Sanding Rolls—1/2" Dia. × 1 1/2" Lg.
    12 Rough-Finish (60 Grit) Tapered Spiral-Wound Sanding Rolls—1/2" Dia. × 1 1/2" Lg.
    6 Rough-Finish (80 Grit) Straight Spiral-Wound Sanding Rolls—3/8" Dia. × 1 1/2" Lg.
    4 Rough-Finish (80 Grit) Straight Spiral-Wound Sanding Rolls—1/2" Dia. × 1 1/2" Lg.
    14 Rough-Finish (80 Grit) Tapered Spiral-Wound Sanding Rolls—1/2" Dia. × 1 1/2" Lg.
    6 Smooth-Finish (120 Grit) Straight Spiral-Wound Sanding Rolls—3/8" Dia. × 1 1/2" Lg.
    4 Smooth-Finish (120 Grit) Straight Spiral-Wound Sanding Rolls—1/2" Dia. × 1 1/2" Lg.
    00000000000000

    Spiral-Wound Sanding Rolls with Shank

    Image of Product. Front orientation. Sanding Rolls. Spiral-Wound Sanding Rolls with Shank.
    The secure bond of the roll to the integrated shank prevents loosening from vibration while sanding, resulting in a smooth finish. Great for precision grinding applications when you need to sand your surface to a specific tolerance. Use these rolls in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots. As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls.
    The most common abrasive material, aluminum oxide is hard enough to sand steel and wood. It costs less than zirconium oxide ceramic but wears down faster.
    Dia.
    Lg.
    Max. Rotation
    Speed, rpm
    Abrasive
    Material
    Abrasive Backing
    Material
    For Use On
    For Use With
    Grit
    Pkg.
    Qty.
    Pkg.
    Straight with 1/8" Diameter Shank
     
    For Rough Finish
    1/4"1 1/4"24,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs8050000000000000
     
    Straight with 1/4" Diameter Shank
     
    For Rough Finish
    1/2"1 3/4"18,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs805000000000000
     
    For Smooth Finish
    3/8"2 1/2"24,000Aluminum OxideFabricSteel, WoodGrinders for Bits and Burs1205000000000000
     

    Long-Life Spiral-Wound Sanding Rolls with Shank

    Image of Product. Front orientation. Sanding Rolls. Long-Life Spiral-Wound Sanding Rolls with Shank.
    Change your sanding rolls less often and produce a more consistent finish compared to standard sanding rolls. The secure bond of the roll to the integrated shank prevents loosening from vibration while sanding, resulting in a smooth finish. Great for precision grinding applications when you need to sand your surface to a specific tolerance. Use these rolls in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots. As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls.
    Zirconium oxide ceramic grit continually fractures to produce new, sharp cutting edges. This abrasive is great for aggressively removing material from steel and wood, and it lasts longer than aluminum oxide.
    Dia.
    Lg.
    Max. Rotation
    Speed, rpm
    Abrasive Material
    Abrasive Backing
    Material
    For Use On
    For Use With
    Grit
    Pkg.
    Qty.
    Pkg.
    Straight with 1/4" Diameter Shank
     
    For Rough Finish
    1/2"2 1/2"18,000Zirconium Oxide CeramicFabricSteel, WoodGrinders for Bits and Burs8050000000000000
     
    back to top