Filter by
For Use On
System of Measurement
Diameter
For Use With
Abrasive Material
Tooth Material
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Body Material
Arbor Hole
Arbor Hole Shape
Long-Life Hole Saws for Ceramic and Masonry
 |  |  |
Arbor with Pilot Drill | Arbor with Pilot Drill |
The diamond-grit edge on these hole saws cuts more accurately, leaves a smoother finish, and lasts up to twice as long as carbide-grit-coated teeth. Saws are for use on reinforced plastic, Kevlar, stone, brick, and other abrasive materials with high silicon content. Attach them to a drill or drill press. An arbor with pilot drill (sold separately) is required. To cut ceramic tile, you must use a 1/4" carbide-tipped pilot drill.
Hole Saws | Arbors with Pilot Drill Bit with 1/4" Hex Shank | Arbors with Pilot Drill Bit with 3/8" Hex Shank | Arbors with Pilot Drill Bit with 7/16" Hex Shank | Replacement Pilot Drill Bits for 1/4", 3/8", & 7/16" Hex Shank | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | For Arbor Thread Size | Body Material | Each | Each | Each | Each | Each | |||||||
For Ceramic, Composite, Fiberglass, Masonry, and Plastic | ||||||||||||||
1 5/8" Cutting Depth | ||||||||||||||
| 9/16" | 1/2"-20 | Steel | 6930A31 | 000000 | 4066A76 | 00000 | 4066A78 | 00000 | 4066A62 | 000000 | 4066A86 | 00000 | ||
| 5/8" | 1/2"-20 | Steel | 6930A32 | 00000 | 4066A76 | 0000 | 4066A78 | 0000 | 4066A62 | 00000 | 4066A86 | 0000 | ||
| 11/16" | 1/2"-20 | Steel | 6930A33 | 00000 | 4066A76 | 0000 | 4066A78 | 0000 | 4066A62 | 00000 | 4066A86 | 0000 | ||
| 3/4" | 1/2"-20 | Steel | 6930A34 | 00000 | 4066A76 | 0000 | 4066A78 | 0000 | 4066A62 | 00000 | 4066A86 | 0000 | ||
| 13/16" | 1/2"-20 | Steel | 6930A21 | 00000 | 4066A76 | 0000 | 4066A78 | 0000 | 4066A62 | 00000 | 4066A86 | 0000 | ||
| 7/8" | 1/2"-20 | Steel | 6930A35 | 00000 | 4066A76 | 0000 | 4066A78 | 0000 | 4066A62 | 00000 | 4066A86 | 0000 | ||
| 15/16" | 1/2"-20 | Steel | 6930A22 | 00000 | 4066A76 | 0000 | 4066A78 | 0000 | 4066A62 | 00000 | 4066A86 | 0000 | ||
| 1" | 1/2"-20 | Steel | 6930A36 | 00000 | 4066A76 | 0000 | 4066A78 | 0000 | 4066A62 | 00000 | 4066A86 | 0000 | ||
| 1 1/16" | 1/2"-20 | Steel | 6930A37 | 00000 | 4066A76 | 0000 | 4066A78 | 0000 | 4066A62 | 00000 | 4066A86 | 0000 | ||
| 1 1/8" | 1/2"-20 | Steel | 6930A38 | 00000 | 4066A76 | 0000 | 4066A78 | 0000 | 4066A62 | 00000 | 4066A86 | 0000 | ||
| 1 3/16" | 1/2"-20 | Steel | 6930A23 | 00000 | 4066A76 | 0000 | 4066A78 | 0000 | 4066A62 | 00000 | 4066A86 | 0000 | ||
| 1 1/4" | 5/8"-18 | Steel | 6930A39 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 1 5/16" | 5/8"-18 | Steel | 6930A24 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 1 3/8" | 5/8"-18 | Steel | 6930A41 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 1 1/2" | 5/8"-18 | Steel | 6930A42 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 1 5/8" | 5/8"-18 | Steel | 6930A43 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 1 3/4" | 5/8"-18 | Steel | 6930A44 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 1 7/8" | 5/8"-18 | Steel | 6930A45 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 2" | 5/8"-18 | Steel | 6930A46 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 2 1/8" | 5/8"-18 | Steel | 6930A47 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 2 1/4" | 5/8"-18 | Steel | 6930A48 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 2 3/8" | 5/8"-18 | Steel | 6930A49 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 2 1/2" | 5/8"-18 | Steel | 6930A51 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 2 5/8" | 5/8"-18 | Steel | 6930A27 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 2 3/4" | 5/8"-18 | Steel | 6930A52 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 2 7/8" | 5/8"-18 | Steel | 6930A28 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 3" | 5/8"-18 | Steel | 6930A53 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 3 1/4" | 5/8"-18 | Steel | 6930A61 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 3 3/8" | 5/8"-18 | Steel | 6930A62 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 3 1/2" | 5/8"-18 | Steel | 6930A63 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 3 5/8" | 5/8"-18 | Steel | 6930A25 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 3 3/4" | 5/8"-18 | Steel | 6930A65 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 4" | 5/8"-18 | Steel | 6930A54 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 4 1/4" | 5/8"-18 | Steel | 6930A66 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 4 1/2" | 5/8"-18 | Steel | 6930A67 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 4 3/4" | 5/8"-18 | Steel | 6930A11 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 5" | 5/8"-18 | Steel | 6930A68 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 5 1/2" | 5/8"-18 | Steel | 6930A14 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 6" | 5/8"-18 | Steel | 6930A69 | 000000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
Miter, Chop, and Table Saw Blades for Composites and Graphite
 |  |
Round Arbor |
A blend of tungsten carbide and diamond grits on the continuous edge of this blade cuts hard, nonmetallic materials including composites and graphite. Use dry or with water or coolant (not included).
Material | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Cut Wd. | Max. Rotation Speed, rpm | Abrasive | Body | Saw Cutting Type | Edge Style | For Use On | Each | |||
10" Diameter | ||||||||||||
| 1" | Round | 0.125" | 9,000 | Carbide/Diamond Blend | Steel | Dry, Wet | Continuous | Composite, Graphite | 40225A21 | 0000000 | ||
Circular Saw Blades for Composites and Graphite
| |
Round Arbor |
A blend of tungsten carbide and diamond grits on the continuous edge of these blades cuts hard, nonmetallic materials including composite and graphite. Use dry or with water or coolant (not included).
Material | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Cut Wd. | Max. Rotation Speed, rpm | Abrasive | Body | Saw Cutting Type | Edge Style | For Use On | Each | |||
2" Diameter | ||||||||||||
| 1/4" | Round | 0.12" | 23,000 | Carbide/Diamond Blend | Steel | Dry, Wet | Continuous | Composite, Graphite | 40225A1 | 000000 | ||
3" Diameter | ||||||||||||
| 1/4" | Round | 0.12" | 23,000 | Carbide/Diamond Blend | Steel | Dry, Wet | Continuous | Composite, Graphite | 40225A8 | 000000 | ||
| 3/8" | Round | 0.12" | 23,000 | Carbide/Diamond Blend | Steel | Dry, Wet | Continuous | Composite, Graphite | 40225A9 | 000000 | ||
4" Diameter | ||||||||||||
| 3/4" | Round | 0.12" | 23,000 | Carbide/Diamond Blend | Steel | Dry, Wet | Continuous | Composite, Graphite | 40225A14 | 000000 | ||
6" Diameter | ||||||||||||
| 5/8" | Round | 0.12" | 9,000 | Carbide/Diamond Blend | Steel | Dry, Wet | Continuous | Composite, Graphite | 40225A17 | 000000 | ||
7 1/4" Diameter | ||||||||||||
| 5/8" | Round | 0.12" | 9,000 | Carbide/Diamond Blend | Steel | Dry, Wet | Continuous | Composite, Graphite | 40225A18 | 000000 | ||
8" Diameter | ||||||||||||
| 5/8" | Round | 0.12" | 9,000 | Carbide/Diamond Blend | Steel | Dry, Wet | Continuous | Composite, Graphite | 40225A19 | 000000 | ||
Hole Saw Kits for Ceramic and Masonry
 |
The saws in these kits have carbide-grit-coated teeth that cut ceramic tile, fiberglass, masonry, plastic, and composites. Attach hole saws to a drill or drill press with the included arbors.
No. of Saws | Dia. | Cutting Dp. | Includes | Each | ||
|---|---|---|---|---|---|---|
| 9 | 3/4", 7/8", 1 1/8", 1 3/8", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2" | 1 15/16" | 3/8" Hex-Shank Arbor with 1/4" Dia. High-Speed Steel Pilot Drill 7/16" Hex-Shank Arbor with 1/4" Dia. High-Speed Steel Pilot Drill Plastic case | 4194A73 | 0000000 |
Band Saw Blades for Fiberglass, Plastic, and Composite
 |
The teeth on these steel blades are carbide tipped, so they'll last longer and produce a smoother cut than other band saw blades when cutting fiberglass, plastic, and composite. Tooth size and number per inch are constant throughout the blade, and the teeth are set to the left and right in a repeating pattern. They're also known as raker-set blades. Choose blades with more teeth per inch for a smooth finish; choose blades with fewer teeth per inch for fast, rough cutting. They have a welded seam and are ready to install on your saw.
For Material Thk. | Material | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Teeth per In. | Min. | Max. | For Use On | Tooth Style | Body | Tooth | Flexibility | Each | |||
1/2" Wide × 0.025" Thick | ||||||||||||
| 44 7/8" | 3 | 2" | 6" | Fiberglass, Composite, Plastic | Constant Set | Steel | Carbide-Tipped Steel | Flexible | 4189A21 | 0000000 | ||
| 64 1/2" | 3 | 2" | 6" | Fiberglass, Composite, Plastic | Constant Set | Steel | Carbide-Tipped Steel | Flexible | 4189A31 | 000000 | ||
| 80" | 3 | 2" | 6" | Fiberglass, Composite, Plastic | Constant Set | Steel | Carbide-Tipped Steel | Flexible | 4189A32 | 000000 | ||
| 93" | 3 | 2" | 6" | Fiberglass, Composite, Plastic | Constant Set | Steel | Carbide-Tipped Steel | Flexible | 4189A41 | 000000 | ||
| 150" | 3 | 2" | 6" | Fiberglass, Composite, Plastic | Constant Set | Steel | Carbide-Tipped Steel | Flexible | 4189A91 | 000000 | ||
| 154" | 3 | 2" | 6" | Fiberglass, Composite, Plastic | Constant Set | Steel | Carbide-Tipped Steel | Flexible | 4189A94 | 000000 | ||
1/2" Wide × 0.035" Thick | ||||||||||||
| 93" | 3 | 2" | 6" | Fiberglass, Composite, Plastic | Constant Set | Steel | Carbide-Tipped Steel | Flexible | 4189A42 | 000000 | ||
3/4" Wide × 0.035" Thick | ||||||||||||
| 93" | 3 | 2" | 6" | Fiberglass, Composite, Plastic | Constant Set | Steel | Carbide-Tipped Steel | Flexible | 4189A43 | 000000 | ||
| 93" | 4 | 1" | 4" | Fiberglass, Composite, Plastic | Constant Set | Steel | Carbide-Tipped Steel | Flexible | 4189A44 | 000000 | ||
| 120" | 4 | 1" | 4" | Fiberglass, Composite, Plastic | Constant Set | Steel | Carbide-Tipped Steel | Flexible | 4189A52 | 000000 | ||
| 130 1/2" | 4 | 1" | 4" | Fiberglass, Composite, Plastic | Constant Set | Steel | Carbide-Tipped Steel | Flexible | 4189A62 | 000000 | ||
| 133" | 3 | 2" | 6" | Fiberglass, Composite, Plastic | Constant Set | Steel | Carbide-Tipped Steel | Flexible | 4189A72 | 000000 | ||
| 150" | 3 | 2" | 6" | Fiberglass, Composite, Plastic | Constant Set | Steel | Carbide-Tipped Steel | Flexible | 4189A92 | 000000 | ||
1" Wide × 0.035" Thick | ||||||||||||
| 120" | 4 | 1" | 4" | Fiberglass, Composite, Plastic | Constant Set | Steel | Carbide-Tipped Steel | Flexible | 4189A54 | 000000 | ||
| 130 1/2" | 4 | 1" | 4" | Fiberglass, Composite, Plastic | Constant Set | Steel | Carbide-Tipped Steel | Flexible | 4189A64 | 000000 | ||
| 138" | 4 | 1" | 4" | Fiberglass, Composite, Plastic | Constant Set | Steel | Carbide-Tipped Steel | Flexible | 4189A83 | 000000 | ||
1" Wide × 0.05" Thick | ||||||||||||
| 138" | 3 | 2" | 6" | Fiberglass, Composite, Plastic | Constant Set | Steel | Carbide-Tipped Steel | Flexible | 4189A82 | 000000 | ||
| 150" | 3 | 2" | 6" | Fiberglass, Composite, Plastic | Constant Set | Steel | Carbide-Tipped Steel | Flexible | 4189A93 | 000000 | ||
Hole Saws for Ceramic and Masonry
 | | |
Arbor with Pilot Drill | Arbor with Pilot Drill |
Hole Saws | Arbors with Pilot Drill Bit with 1/4" Hex Shank | Arbors with Pilot Drill Bit with 3/8" Hex Shank | Arbors with Pilot Drill Bit with 7/16" Hex Shank | Replacement Pilot Drill Bits for 1/4", 3/8", & 7/16" Hex Shank | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Material | |||||||||||||||
Dia. | For Arbor Thread Size | Body | Tooth | Each | Each | Each | Each | Each | |||||||
For Ceramic, Composite, Fiberglass, Masonry, and Plastic | |||||||||||||||
1 3/8" Cutting Depth | |||||||||||||||
| 5/8" | 1/2"-20 | Steel | Steel | 4194A13 | 000000 | 4066A76 | 00000 | 4066A78 | 00000 | 4066A62 | 000000 | 4066A86 | 00000 | ||
| 3/4" | 1/2"-20 | Steel | Steel | 4194A42 | 00000 | 4066A76 | 0000 | 4066A78 | 0000 | 4066A62 | 00000 | 4066A86 | 0000 | ||
| 7/8" | 1/2"-20 | Steel | Steel | 4194A11 | 00000 | 4066A76 | 0000 | 4066A78 | 0000 | 4066A62 | 00000 | 4066A86 | 0000 | ||
| 1" | 1/2"-20 | Steel | Steel | 4194A12 | 00000 | 4066A76 | 0000 | 4066A78 | 0000 | 4066A62 | 00000 | 4066A86 | 0000 | ||
| 1 1/8" | 1/2"-20 | Steel | Steel | 4194A43 | 00000 | 4066A76 | 0000 | 4066A78 | 0000 | 4066A62 | 00000 | 4066A86 | 0000 | ||
| 1 1/4" | 5/8"-18 | Steel | Steel | 4194A14 | 00000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 1 3/8" | 5/8"-18 | Steel | Steel | 4194A44 | 00000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 1 1/2" | 5/8"-18 | Steel | Steel | 4194A16 | 00000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 1 3/4" | 5/8"-18 | Steel | Steel | 4194A18 | 00000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 1 7/8" | 5/8"-18 | Steel | Steel | 4194A45 | 00000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 2" | 5/8"-18 | Steel | Steel | 4194A19 | 00000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 2 1/8" | 5/8"-18 | Steel | Steel | 4194A46 | 00000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 2 1/4" | 5/8"-18 | Steel | Steel | 4194A22 | 00000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 2 3/8" | 5/8"-18 | Steel | Steel | 4194A47 | 00000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 2 1/2" | 5/8"-18 | Steel | Steel | 4194A24 | 00000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 2 3/4" | 5/8"-18 | Steel | Steel | 4194A33 | 00000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 3" | 5/8"-18 | Steel | Steel | 4194A27 | 00000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 3 1/4" | 5/8"-18 | Steel | Steel | 4194A26 | 00000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 3 3/8" | 5/8"-18 | Steel | Steel | 4194A48 | 00000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 3 3/4" | 5/8"-18 | Steel | Steel | 4194A49 | 00000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 4" | 5/8"-18 | Steel | Steel | 4194A31 | 00000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
| 4 1/2" | 5/8"-18 | Steel | Steel | 4194A32 | 00000 | ——— | 0 | 4066A79 | 00000 | 4066A63 | 00000 | 4066A86 | 0000 | ||
Dremel-Compatible Rotary Tool Blades for Composites and Fiberglass
 |
A tungsten carbide grit edge cuts through abrasive materials such as composites and fiberglass.
Arbor Hole | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Size | Shape | Cut Wd. | Max. Rotation Speed, rpm | Abrasive | Body | Edge Style | Each | ||
| 3/4" | 1/8" | Round | 0.063" | 10,000 | Carbide | Steel | Continuous | 1257A51 | 000000 | |
| 1" | 1/4" | Round | 0.12" | 23,000 | Carbide | Steel | Continuous | 1257A55 | 00000 | |
| 1 1/4" | 1/8" | Round | 0.063" | 10,000 | Carbide | Steel | Continuous | 1257A52 | 00000 | |
| 1 1/2" | 1/4" | Round | 0.12" | 23,000 | Carbide | Steel | Continuous | 1257A56 | 00000 | |
| 1 3/4" | 1/4" | Round | 0.083" | 26,200 | Carbide | Steel | Continuous | 4021A18 | 00000 | |
