We will reply to your message within an hour.
Place these scales on your bench top and view weights on an easy-to-read digital screen.
These scales are 10 times more accurate than our other bench-top scales.
The attached cover protects the scale while you carry it.
Weigh loads without obstructing the display. Mount the display up to 9 feet from the platform.
A stack light and audible alarm alert you when packages, products, and parts are too heavy or too light. Also known as check weighers, these scales verify quality and consistency in packing, parts machining, and other activities.
Small enough to carry with you for measurements on the go.
Safely weigh material in hazardous environments—these scales operate with low voltages so they won’t create sparks.
For corrosion resistance in addition to portability, this scale has a powder-coated steel housing and platform.
Place these scales on your bench top to handle weighing jobs right where you work.
These scales are often used on small bench tops where larger scales won’t fit.
A stainless steel housing and platform resist corrosion in wet conditions and harsh environments.
Weigh small quantities of lightweight materials.
IP rated for washdowns and use in dusty and wet environments, these scales are NTEP approved to weigh materials that are sold by weight.
Position the display up to 6 feet from the platform for an unobstructed view when weighing large loads.
Count parts in addition to weighing material.
Count parts and weigh materials sold by weight.
Keep a safe distance when weighing large loads—these scales have a remote display that can be mounted up to 20 feet from the platform.
Count and weigh loads that are difficult to lift.
IP69K and NTEP approved as legal for trade, use these scales in washdown environments for material that may be sold by weight.
Roll this scale wherever you need to weigh.
Similar in style to a hand truck, this scale tilts back on two rubber wheels to move.
Position the display up to 14 feet from the platform for reading at a safe distance.
To quickly check inventory, roll these dollies wherever you need them to weigh and count the contents of drums. Their built-in scale measures weight and has an accurate piece-count mode—even while adding or removing contents from your drum.
Measure a person’s weight, height, and BMI (body mass index).
Commonly used to prevent overloading a trailer tongue, these scales estimate the weight of large loads that don’t fit on a standard floor scale.
Suspend items from the bottom hook and read their weights on the classic dial face.
Determine the approximate weight of large, bulky materials that are impractical to weigh with a floor scale. These scales are often used in loading vehicles and can be suspended from a crane, block and tackle lift, A-frame, or forklift blade.
Attach the bar handle to these scales for weighing by hand.
NTEP-approved, these hanging scales are for use with materials sold by weight.
A sealed aluminum housing protects from corrosion in wet environments.
Often used to weigh materials sold by weight in harsh conditions, these NTEP-approved scales have an aluminum enclosure that meets IP65 and NEMA 4 for protection from dirt and washdowns.
Weigh boxes as they flow through your conveyor line to reduce bending and lifting.
Housing is plastic.
Housing is brass.
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.
Measure tension force as well as weight.
The large dial makes these gauges easy to read. They measure tension force as well as weight.
Press the side of the gauge tip against an object to record the amount of tension required to move it.
Measure the tension of wire and filament without pausing your operation.
Apply your load directly to the top of these gauges to measure compression force.
Use the included Windows-compatible software to upload measurement data.
Measure tension force as well as weight. Also known as dynamometers.
Safely view your tension force measurements on a handheld receiver up to 450 ft. away when moving bulk material with cranes and hoists.
Grip paper, film, and thin plastic.
Hold fine wire and filament.
Good for gripping most shapes and materials.
A chuck-style grip with a round opening gets a secure hold on pins.
Weigh liquids, powders, or crystals as you transfer them from one container to another with these spoons.
Also known as load cells, these sensors measure and track the forces of your equipment by converting them into electrical signals.
Thinner than a credit card, these force sensors fit into narrow spaces to measure the applied load between two surfaces.
Use these gauges with changeable sensors and square-drive sockets to display, collect, and download torque readings.
Place your tool and the included square drive connector on the tester and turn.
Finger-tighten the three-jaw chuck onto the tool to be measured, then twist either the gauge or tool to test.
Measure the torque output of torque wrenches, screwdrivers, and other hand tools to ensure they deliver the right amount of torque—and check your results on a digital screen.
These testers have a digital display and are accurate to ±1%.
Calibrate torque-limiting power tools such as air-powered and impact drivers.
Measure the force of hand and non-impact electric torque screwdrivers to keep fasteners from failing due to under or overtightening.
Measure the twisting force needed to tighten or loosen caps and knobs with these torque testers.
Glue these gauges onto a structure to measure strain in a single direction.
Made to last, our most corrosion-resistant rulers are stainless steel and have wear-resistant etched markings.
A calibration certificate traceable to NIST is included with these stainless steel rulers.
Numbers and graduations etched in light colors are easy to see on a black background.
Rulers have large numbers and deeply etched graduations.
Made of aluminum, these rulers are an economical alternative to stainless steel rulers.
Ensure accurate measurements with these certified rulers.
Keep your workpiece in view as you measure with these see-through rulers.
A cork back prevents slipping and protects delicate surfaces.
Made of wood with a clear protective coating, this ruler is an economical choice for measuring objects up to three feet long.
A clear protective coating and brass endcaps add durability to these hard-maple rulers.
Also known as machinists’ rules, these rulers ensure reliable, repeatable measurements.
Ensure reliable, repeatable measurements with these rulers.
An economical alternative to Starrett High-Accuracy Rulers, these provide reliable, repeatable measurements.
These rulers include a certificate of calibration traceable to NIST with test measurements that confirm accuracy.
A reversible, removable hook grabs the edge of an object for easy alignment.
Protect your ruler from scratches and wear with a TiN (titanium nitride) coating.
High-powered magnets hold these rulers in place.
Permanently mount these rulers to a machine or workbench.
Use to find diameters and centers.
Rulers are narrow and just 6" long to measure in tight spaces.
Create a ruler up to 192" long by adding continuous segments.
Fold these rulers for convenient storage and transport.
A safety guard or finger groove prevents your fingers from getting in the way as you cut with these rulers.
Permanently mount these rulers on machines, tanks, and walls to measure heights and depths.
The graduations on these rulers are half the actual length of the object you are measuring.
These extra-thick rulers have a polycarbonate coating that resists wear from traffic and chemicals.
Measurements are printed from top to bottom for measuring heights and depths.
Use to measure heights and tank levels.
A hook grabs the edge of an object for easy alignment.
Zero marks the center when these rulers are positioned so the same number touches each side of an object.
Slip these rulers into your pocket, so they’re always on hand to find center readings. All are narrow and about 6" long to measure in tight spaces.
Rulers are marked with picas for working with type.
Slide this ruler across the surface of plans, maps, and blueprints and read the measurement on the digital display in one of 111 different scales including inches, feet, yards, miles, centimeters, meters, kilometers, or a scale you define.
Determine the circumference of a circle without calculations.
Ensure accurate measurements with certified tape measures.
A window with an indicator line clearly shows the measurement.
Compared to standard tape measures, these are less than half the size.
The blade on these tape measures is chrome-plated for durability and corrosion resistance.
Attach the magnetic-hook tip to metal surfaces to assist vertical and distance measuring.
The blade locks in place when extended until you press the release lever, and a magnetic-hook tip attaches to metal surfaces to assist vertical and distance measuring.
An orange case makes these tape measures easy to spot.
These tape measures have a chrome-plated, impact-resistant plastic case.
A built-in slot for your finger allows you to control the speed these tape measures retract without pinching your finger with the hook.
Drop tested to 120 ft., these tape measures can fall from a 10-story office building and still work.
A black blade with bright yellow graduation marks makes these tape measures easy to read, even in low-light and high-glare locations. Drop-tested to 120 ft., they can fall from a 10-story office building and still work.
Slide the lock to hold the blade in place.
Measure from a distance—the blade on these tape measures remains rigid when extended up to 11 feet.
Control how fast the blade retracts without pinching your finger—these tape measures have a built-in finger slot.
The case is impact-resistant plastic that's yellow for high visibility. Slide the lock to hold the blade in place.
The blade automatically locks in place when extended and stays locked until you press the release lever.
Clip this magnetic holder to your belt and attach the included metal adapter to your tape measure's case.
All internal parts, including the blade, are stainless steel for corrosion resistance.
For a comfortable and secure hold, these tape measures have a narrow case with a molded rubber grip.
Pull the blade out of these tape measures and it locks in place automatically. Press the lever to release it.
Read measurements in dark spaces with the LED light that illuminates the blade.
With a built-in slot for your finger, you can control the speed these tape measures retract without pinching your finger with the hook.
Numbers and graduation marks are printed vertically to measure heights and depths.
Fractions are labeled on the blade every 1/8" for fast reading.
Attach to curved or flat steel surfaces.
Durable and flexible, these tape measures are coated for scratch resistance.
At about half the size of standard diameter tape measures, these fit in your pocket.
Also known as tree tapes, wrap these tape measures around circular items to determine diameter and measure circumference without the need for calculations.
Accurately measure diameter.
Also known as tree tapes, wrap these tape measures around circular items to measure the circumference and determine the diameter without any calculations. The blade automatically retracts unless it’s looped onto something or the lock is engaged.
Measure distances over 35 ft.
These reliable tape measures include a calibration certificate traceable to NIST stating they have passed a test for accuracy.
Measure over 35 ft. and quickly retract the tape once you're finished. These tape measures will recoil automatically unless you engage the brake or hook the tip onto something.
Grip the tape measure through the hole in the center and quickly rewind the blade with the specially designed reel.
Hold on to the large, rubber-coated handle while carrying these tape measures.
Easily spot the brightly colored case on these tape measures around your worksite and in your toolbox.
Protect your tape measure with these leather holders.
Find the exact center of your work. Measure the total distance with the upper scale; then find the same number on the bottom scale—that's your center point.
Measure volume in gallons or liters without calculations.
Built to resist corrosion and last in harsh environments, these vertical rulers are iron with a porcelain-enamel finish. Mount them to walls and tanks.
Permanently mount these vertical rulers to walls and tanks.
Connect continuous segments to create a ruler up to 10 ft. long.
Fold these vertical rulers for convenient storage and transport.
Attach a plumb bob (sold separately) to the rope’s hook and lower it into your tank to take a measurement.
Also known as oil-gauging tapes, use these tape measures to check the level of oil and other fluids in deep, large containers such as tanks and vats.
Increase the accuracy of your manual machine when you fit it with a linear scale.
This digital readout system displays precise positioning on one axis. For use with machines that perform dry machining and cutting applications, such as table saws, band saws, planers, and drill presses.
Retrofit your manual milling machine with a digital readout system. It measures and displays precise tool and workpiece positioning on two axes.
Install a digital readout stop and fence system onto the setup for your miter, chop, or radial arm saw. It displays measurements on one axis, allowing you to cut pieces up to 94" with high precision.
Mount a digital readout system onto your manual lathe. It measures and displays precise tool and workpiece positioning on two axes.
Reach deep into small holes and slots for precise depth measurements.
Take precise depth measurements in small holes and slots.
All gauges have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off.
Connectable extension rods allow you to measure depths.
Measure depth in dusty or wet environments--these gauges are rated IP67 for protection from dust and temporary water submersion.
Check measurements at a glance.
Use these blades with Starrett High-Accuracy Combination Square Heads. They meet Fed. Spec. GGG-R-791H, which establishes uniform standards for accuracy, graduations, and size.
Replace your try square, miter square, depth gauge, height gauge, center-point finder, and level. The blade on these squares meets Fed. Spec. GGG-R-791H, which establishes uniform standards for accuracy, graduations, and size.
Attach to Starrett High-Accuracy Combination Square Blades with the included lockbolts.
Replace your try square, miter square, depth gauge, marking gauge, 90° level, ruler, and scriber with one tool.
Blades are for use with High-Accuracy Combination Square Heads.
Use these squares in place of your try square, miter square, depth gauge, height gauge, center-point finder, and level.
Attach to High-Accuracy Combination Square Blades with the included lockbolts.
A titanium coating protects the blade against scratches and wear.
Built for welding and other heavy duty fabricating jobs, these squares have an extra-wide head and a large thumbwheel, so they’re easy to adjust and hold while wearing gloves. They combine the functionality of a try square, miter square, depth gauge, marking gauge, 90° level, and ruler in one tool.
Ensure reliable, repeatable angles.
Lay out machine tables and work stations at precise right angles. This laser generates two red lines that form a 90° angle.
Also known as carpenters’ and framing squares, these have graduations on both blades for horizontal and vertical measurements.
Also known as try squares, these are square inside and out for checking and marking angles.
These squares meet Fed. Spec. GGG-S-656-E, which establishes uniform standards for square accuracy to ensure reliable, repeatable angles.
Measure and mark material exactly where you need to with a sliding blade.
Large numbers and dark graduations on both blades make it easy to read horizontal and vertical measurements.
Also known as rafter squares, these have a 0° to 90° scale for measuring angles.
Position your workpieces at the correct angle prior to welding.
Pipe fitting sizes and welding charts are shown on this square in wear-resistant etched markings.
Mount on any flat surface.
Take precise measurements with this protractor.
Measure angles and dimensions with one tool.
Use these protractors to measure angles and dimensions.
With a calibration certificate traceable to NIST that says they’ve passed a test for accuracy, you can trust these protractors to measure angles on molds and jigs precisely.
Precisely measure angles on molds and jigs.
Measure angles with these round protractors.
Also known as bevel protractors, set bevels and measure angles with the adjustable arm.
Set bevels and measure angles. Also known as bevel protractors, these have an adjustable arm.
Small enough to fit in your pocket, this versatile tool measures angles and dimensions and has a center finder.
These tools have front and back digital displays, as well as horizontal and vertical vials.
A dot laser extends the working distance 200 feet beyond the tool length. This tool has two digital displays that invert when turned upside down; one shows the base angle and the other shows the moveable arm angle.
These tools have one digital display and a lock to hold the arms in position.
At 2 1/4" square and 1" wide, this angle indicator easily fits into your pocket.
These angle indicators also show level on the display.
To measure angles from a distance and hear the measurement read aloud, download an app to connect your device to these angle indicators. At 2 1/4" square and 1" wide, they fit easily in your pocket.
Align guide rails or lay pipe at specific angles from a flat surface.
These angle indicators come with a calibration certificate that's traceable to NIST and includes the test measurements that confirm accuracy.
These angle indicators display highly accurate angle, level, and tilt measurements.
The LCD on these digital angle indicators shows angle in degrees and percent of slope.
A ball inside a level tube indicates the side-to-side tilt angle.
Measure 40° front-to-back tilt in addition to side-to-side tilt.
Temporarily mount these indicators to a metal surface. They have four quadrants that each read any angle from 0° to 90°.
Also known as angle finders, use these to gauge the angle of any surface.
These angle indicators have a horizontal leveling vial and can measure angles between 0° and 180°.
These gauges have 18 leaves that swing out when you want to quickly check an angle. They're more convenient than a protractor when identifying 45° and smaller angles.
Measure the outside diameter of small round- and hex-shaped objects such as rods, drill bits, bolts, and tubing with this pocket-size tool.
Wrap these pocket-size tape measures around pipe and fittings to determine size.
Measure outer diameter and mark lines around pipe.
Use these pocket-size identifiers to determine the angle of your flared fitting.
Also known as safety scales, these gauges confirm that the gaps between the grinding wheel and the tool rest and tongue comply with OSHA and ANSI requirements.
Verify machine guard openings are sized to prevent hands and fingers from reaching hazards. These gauges check whether a machine guard complies withOSHA, CSA, or ANSI requirements.
Also known as snap gauges for how they snap around rods, shafts, and other cylindrical objects, these gauges quickly check if an outside diameter is within tolerance.
With a calibration certificate traceable to NIST that says they've passed a test for accuracy, you can trust these gauges to confirm if your object's outer diameter is within tolerance. They're also known as snap gauges because they snap onto rods, shafts, and other cylindrical objects.
Lightweight yet strong and durable, these bamboo levels won't stick to wet cement. Also known as masonry levels.
The sturdy box-style housing has precision-machined leveling surfaces to ensure accuracy.
These brightly-colored levels are easy to spot.
One of the horizontal vials is a pitch gauge that reads slope in 1/8" increments.
Glow-in-the-dark vials are easy to read in low light.
Align and measure at the same time with these levels that have rulers on the front and side.
Adjust a surface into a level position on multiple planes.
These levels have a plastic housing.
These levels have a sturdy aluminum housing.
These levels come with a calibration certificate that's traceable to NIST and includes the test measurements that confirm accuracy.
A color LCD and highly accurate sensor allow you to level both horizontally and vertically at the same time. This level also displays a real-time vibration graph.
A color LCD and highly accurate sensor allow you to level both horizontally and vertically at the same time.
With a precision-machined leveling surface and highly sensitive vial, this level provides superior accuracy.
These levels come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.
Slip these levels into a drilled hole.
Plastic vials are more durable than glass.
Mount these levels to a wall or other vertical surface and they will indicate when you're level on the horizontal plane.
Mount these levels to a table or other horizontal surface and they will indicate when you're level on the horizontal plane.
Stick these levels onto carts, mobile equipment, and other horizontal surfaces to make sure they're level before use. The adhesive backing forms a permanent hold with no drilling or fasteners required.
Replace broken vials in tools and equipment.
A magnet keeps this 90° level in place while you position posts and corners.
Use this 90° level to position posts and corners.
A thumb screw secures to the end of your pipe or conduit to ensure accuracy when bending.
Hang these levels from the center of a string stretched between two points, and the string acts as a horizontal reference line.
One person is all you need to determine level around corners and over long distances.
Use these telescoping rods in conjunction with sight levels. They extend to the length you need, then collapse for convenient storage.
These fiberglass rods are nonconductive.
Kits include two chain clamps, an inspection mirror, and a case.
Install a test indicator on each holding rod to check for shaft misalignment.
Two chain clamps position two Starrett test indicators at different points along a shaft to find any misalignment.
Align rotary shafts with the help of a mobile app.
Use stylus movement to check for misalignment. Kits include two sets of mounting brackets with adjustment knobs.
Level machinery, check surface flatness, and scribe work positions.
Take measurements off of scaled architectural or engineering drawings with these specialized scales.
Unfold and lock the corners to form a triangle for marking angles.
A protractor and triangle in one, use these tools to quickly set any angle from 0° to 90°.
Mark and cut straight lines or 90° angles.
Small enough to fit into your pocket, the blade is narrow and only 6" long. These scales are often used for taking measurements off scaled architectural or engineering drawings.
Use these highly accurate straightedges as a guide to scribe and cut straight lines and to check surface straightness.
A rule, compass, protractor, and template all in one tool.
Draw and cut straight lines in drafting, graphics, and construction applications.
Highly accurate, these straightedges work as a guide to scribe and cut straight lines and to check surface straightness. They have graduations, so you can take measurements as you go.
Align the level to find and mark the vertical center of curved surfaces.
Locate and mark the centerline on rods, tubes, and pipes, lay out keyways, and establish angles for connections.
Find the center of square and round materials, such as structural framing and pipe, and determine setup angles on milling machines and grinders.
Duplicate or transfer any angle.
Transfer multiple angles, draw parallel lines, or create a template to make repeated patterns and measurements.
Compare your surface finish to one of the swatches on these solid nickel-alloy scales.
These scales come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.
Compare your surface finish to one of the swatches on this inexpensive plastic scale.
Sets include six files.
An economical way to determine the hardness of steel on the Rockwell C-scale.
A microscope measures the indentation made by a small diameter ball penetrator to provide a hardness reading.
Make sure your hardness testers are accurately calibrated.
Operate these testers with one hand. Squeeze the handles until the penetrator contacts the test material and a reading appears on the dial indicator.
These testers use an indenter to measure hardness.
Measure the hardness of flat materials, such as plastic, rubber, and laminate.
Slide these bars into a Brinell hardness tester to determine the hardness of very hard steel.
Determine the hardness of very hard steel.
Determine the relative hardness of resins, film, lacquer, and paint by testing their resistance to scratches by graphite pencils.
One side of these rulers lists tap and drill sizes. The other side has a decimal equivalent table and a 6" rule.
Weigh and transport pallets with one machine.
Ensure tires are fit for use. Gauges measure tread depth up to 1".
Magnify items and capture images for quality control and material inspection. View on the built-in display or connect to a computer.
Magnify and measure in one operation.
These plastic bars have a magnified center; their edges are marked with graduations.
Weigh refrigerant cylinders to dispense the correct amount of refrigerant.
Dispense programmed amounts of refrigerant.
Set torque and the clutch slips to prevent you from exceeding it.
A green light and a beep alert you when you've reached 90% of your set torque, and a steady tone sounds once you've hit your target. Set your torque in cNm, cm-Kg, or in.-lbs. and quickly check the LCD for real-time measurements along the way. A red light warns if you begin to overtighten.
A dial shows how torque measurements change as you turn the driver. Use these tools to fasten to a specific torque, determine fastener torque specifications, and identify the torque required to loosen tightened fasteners.
Attach a socket to the 1/4" square drive tip. These tools have a dial that shows how torque measurements change as you turn the driver. Use to fasten to a specific torque, determine fastener torque specifications, and identify the torque required to loosen tightened fasteners.
Make sure blades are straight between your guides.
Ensure proper blade tension.
Measure belt tension up to 2,200 lbs.
Keep an eye on belt tension to minimize vibration, noise, and slippage.