Clean and scrape off sealant and gaskets—the plastic blade on these scrapers won't scratch delicate surfaces.

Pry, chisel, and scrape with one tool.

These scrapers have four-sided blades for longer life—when you need a new edge, turn the blade 90°.

Made of aluminum-bronze, these scrapers are FM approved for use in hazardous environments. They're nonmagnetic, corrosion-resistant, and inhibit sparking.

Remove paint and varnish from concave and convex moldings, cracks, and seams.

Made of aluminum-bronze, these nonmagnetic, corrosion-resistant scrapers inhibit sparking. They're FM approved for use in hazardous environments.

Use these blades with your reciprocating saw to scrape away glue, tar, and other hard-to-remove substances.

Remove solidified adhesives, waxes, and sealants with a heated blade.

Scrape away gaskets, undercoatings, and other tough-to-remove materials with the power of 4,800 strokes per minute.

Use as a spreader, scraper, and paint-roller cleaner.

Spread adhesive, thinset, and other hard-to-clean materials without scratching your surface and then simply throw these knives away.

Resist heat up to 410° F with a glass-filled nylon blade and handle.

Add any standard threaded handle to extend the reach of these putty knives.

The blade is nonsparking with a beveled edge for removing thin coatings.

These thick blades are durable to cut through tough material such as leather, rope, and thick cardboard.

Cut without contaminating your workpiece.

A knife edge scrapes away caulk and paint.

Cut, scrape, and grind in tight spaces without having access to an outlet. This tool has an oscillating blade that makes flush and plunge cuts without damaging the surrounding material.

Use with Air-Powered Needle Scalers/Chiseling Hammers.

The SDS-Max shank has three deep slots and two shallow slots for use with SDS-Max-drive rotary hammers.

These chisels have a combination round and hex shank that works with spline-drive rotary hammers.

Also known as jumbo shank chisels.

Made of aluminum-bronze that is Factory Mutual approved, these chisels inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Use with air-powered pavement-breaker hammers.

Made of aluminum-bronze that is Factory Mutual approved, these chisels inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Use for cutting, chipping, scraping, and staking.

Also known as machinist's scrapers, these tools remove material and smooth edges on a workpiece.

Carry these slim-handled tools comfortably in your pocket.

Place the tool over your tube and twist to deburr.

These drill attachments scrape both the inner and outer edges of plastic pipe and tube to finish them for connections.

These blades hold up against repeated use better than standard deburring blades.

These blades are titanium nitride (TiN) coated for wear resistance.

Use with blades that have a 0.125" shank and trade numbers with a prefix of E, S, or EX.

These sets include four handles and four blades.

These sets include four handles and four blades.

Use with blades that have a 0.125" shank and trade numbers with a prefix of E, S, or EX.

Carry these slim-handled tools comfortably in your pocket.

Quickly attach and remove these bits from interchangeable-bit tools.

These knives have a sturdy blade for scraping paint and debris and for applying and smoothing joint and spackling compounds.

Also known as mortar hoes, the blade on these tools has holes to allow concrete to pass through as you mix.

The blades on these spatulas are flexible, self-sharpening, and won't absorb odors.

These paddles are often used with caustics such as detergents and cleaning fluids.

Push, pull, and mix food and other material with these hoes—they meet NSF/ANSI 2 design standards for sanitary food equipment.

Made of aluminum-bronze that is Factory Mutual approved, these hoes inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Assign colors to avoid cross contamination. A channel-free blade prevents debris from getting stuck inside the blade.

The neoprene blade resists ink, oils, coolants, and most solvents while the vinyl blade provides cushion.

A quick-release thumb lever allows you to move the channel off-center.

Clear away debris and water with one tool.

A brush on one side allows you to scrub and dislodge debris.

PVC blades resist oil, grease, and solvents.

EPDM rubber blades make these squeegees safe to use on light-colored floors.

FDA compliant for direct contact with food, these squeegees are good for use in food-service and hospital environments. They have a nonmarking blade and a sanitary handle.

Use these belt scrapers to remove debris from conveyor belts. If a chip of this blade breaks off near a process line, it can be located by metal detectors to reduce contamination risks in food processing applications.

Use for hard, heavy deposits.