Screwdriver Bit Extensions

Filter by

System of Measurement

Overall Length

For Bit Hex Shank Size

Shank Type

Hex Shank Size

Bit-Holding Mechanism

Ball Detent

Magnet

Magnetic Quick-Change Chuck

Drive Style

For Bit Shank Type

Drive Size

Material

Length

For Use With

Drills and Powered Screwdrivers

Driver Style

Sold As

Shaft Length

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

RoHS

Compliant

Not Compliant

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Performance

REACH

Unit of Measure

Grip Style

Number of Pieces

Container Type

Metal Stand

Plastic Case

Torque

2 in·lbf to 36 in·lbf

6 in·lbf to 25 in·lbf

15 in·lbf to 65 in·lbf

118 Products

Bit Adapters

Use hex-shank bits (also known as insert bits) in drills and powered screwdrivers. These adapters have a groove in the shank to fit in a power-tool chuck.

	For Bit Shank Type	For Bit Hex Shank Size	Overall Lg.	Material		Each
Ball-Detent Bit Holder



	1/4"	Hex	4 mm	2 3/8"	Steel	7225A75	00000


	Magnet Bit Holder



			1/4"	Hex	1/4"	2 1/8"	Stainless Steel	7225A21	0000


			1/4"	Hex	1/4"	2 3/8"	Stainless Steel	7225A28	0000
			1/4"	Hex	1/4"	2 5/8"	Stainless Steel	7225A29	0000
			1/4"	Hex	1/4"	2 7/8"	Steel	7225A24	00000
			1/4"	Hex	1/4"	3"	Stainless Steel	7225A22	0000
			1/4"	Hex	1/4"	3 7/8"	Stainless Steel	7225A31	0000
			1/4"	Hex	1/4"	5 7/8"	Stainless Steel	7225A32	00000
			1/4"	Hex	1/4"	7 7/8"	Stainless Steel	7225A33	00000
			1/4"	Hex	1/4"	10"	Stainless Steel	7225A34	00000
			1/4"	Hex	1/4"	12"	Stainless Steel	7225A79	00000
			1/4"	Hex	5/16"	3 1/4"	Steel	7225A25	00000


			5/16"	Hex	1/4"	3 1/8"	Steel	7225A71	00000
			5/16"	Hex	5/16"	3 1/8"	Steel	7225A72	00000
			7/16"	Hex	1/4"	3 1/8"	Steel	7225A19	00000


			Retaining-Ring Bit Holder



					1/4"	Hex	1/4"	2 1/8"	Stainless Steel	7225A51	0000


					1/4"	Hex	1/4"	4"	Stainless Steel	7225A61	0000
					1/4"	Hex	1/4"	6"	Stainless Steel	7225A62	00000
					1/4"	Hex	1/4"	10"	Stainless Steel	7225A63	00000
					5/16"	Hex	5/16"	2 1/2"	Steel	7225A66	00000

Strong-Hold Bit Adapters


Magnetic Quick-Change Chuck	Magnetic-Twist-Lock Bit Holder

Twist-Lock Bit Holder	Quick-Change Chuck for HIOS Bit Shank

Quick-Change Chuck for Hex Bit Shank

Lock your bit into the adapter to prevent accidental disengagement. Use hex-shank bits (also known as insert bits) in drills and powered screwdrivers. These adapters have a groove in the shank to fit in a power-tool chuck.

Magnetic Quick-Change Chuck—To secure a bit in adapters with quick-change chuck, pull back on the chuck to insert the bit and then push it forward to lock the bit place.

Magnetic-Twist-Lock Bit Holder—To secure a bit in twist-lock adapters, tighten the knurled end.

Twist-Lock Bit Holder—To secure a bit in twist-lock adapters, tighten the knurled end. Adapters that have nonmagnetic bit holders won’t attract loose metal parts and shavings.

Quick-Change Chuck—Adapters that have nonmagnetic bit holders won’t attract loose metal parts and shavings. To secure a bit in adapters with quick-change chuck, pull back on the chuck to insert the bit and then push it forward to lock the bit place.

	For Bit Shank Type	For Bit Hex Shank Size	For Bit HIOS Shank Size, mm	For Bit Half Moon Shank Size, mm	Overall Lg.	Material		Each
Magnetic Quick-Change Chuck



	1/4"	Hex, Quick-Change Hex	1/4"	—	—	2"	Steel	7179A11	000000


	1/4"	Hex	1/4"	—	—	2 3/8"	Stainless Steel	8345A38	00000
	1/4"	Hex	1/4"	—	—	2 7/8"	Stainless Steel	8345A36	00000
	1/4"	Hex, Quick-Change Hex	1/4"	—	—	6"	Steel	7179A12	00000
	1/4"	Hex, Quick-Change Hex	1/4"	—	—	12"	Steel	7179A13	00000


	Magnetic-Twist-Lock Bit Holder



			1/4"	Hex	1/4"	—	—	3"	Stainless Steel	7225A41	0000


			1/4"	Hex	1/4"	—	—	3 1/8"	Stainless Steel	7225A49	00000
			1/4"	Hex	1/4"	—	—	6"	Stainless Steel	7225A42	00000


			Twist-Lock Bit Holder



					1/4"	Hex	1/4"	—	—	2 3/8"	Stainless Steel	7225A59	0000


					Quick-Change Chuck



							1/4"	HIOS, Half Moon	—	4	4	2"	Steel	7225A78	00000


							5/16"	Hex	7/16"	—	—	2 3/8"	Aluminum	7225A73	00000

Torque Screwdriver and Bit Sets

These sets include an adjustable torque driver, bits for different drive styles, and a socket adapter. To adjust torque, remove the black vinyl end cap and turn the attached adjustment key. When set torque is reached, the driver slips to disengage and stop turning the fastener, preventing overtightening. Sets come with a calibration certificate that states the product has passed a test for accuracy.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

												Material
	No. of Pieces	Components Included	Adapters Included	Extensions Included	Drive Tools Included	Torque Range	Graduations	For Bit Hex Shank Size	Torque-Limiting Direction	Clockwise Accuracy	Overall Lg.	Shaft	Handle	Certificate Type		Each
Slip-Release Torque Limiter







				in·lbf, N-m

				29	1 Adapter 1 Drive Tool 1 Extension 26 Bits	1/4" Square Drive Socket Adapter	Screwdriver Bit Extension	Torque-Limiting Screwdriver	2 in·lbf to 36 in·lbf 0.2 N-m to 4 N-m	2 in·lbf 0.2 N-m	1/4"	Clockwise	±6%	7 3/4"	Aluminum	Aluminum	Calibration Certificate Traceable to NIST	5716A52	0000000

Bit Adapters for Bit Screwdrivers

Use a 4 mm bit in a bit driver that's designed for _1/4" bits.

	For Bit Shank Type	For Bit Hex Shank Size	Overall Lg.	Material		Each
Magnet Bit Holder



	4	Hex	1/4"	1"	Steel	2587N12	00000

Tight-Clearance Flexible Bit Screwdrivers

A flexible shaft bends around obstacles to access screws in hard-to-reach places. These screwdrivers snake into compact machinery where a rigid tool wouldn't fit. However, they may wobble if you crank them too hard. Attach a bit (not included) to drive a variety of screws with a single tool.

Quick-Change Chuck—Holds bits more securely than a magnet, so they don't accidently slip off. Pull back the chuck to insert a bit; push the chuck forward to lock the bit in place.

Ultra Grip—Designed for maximum comfort and control. The soft plastic coating and contoured shape reduce strain to prevent cramping and soreness during repetitive tasks. They also guarantee a secure grip.

			Shaft
For Bit Hex Shank Size	Overall Lg.	Material	Lg.	Overall Wd.	Bit-Holding Mechanism	Grip Style		Each
1/4"	11"	Rubber-Coated Steel	7"	9/16"	Quick-Change Chuck	Ultra Grip	5705A3	000000

Screw-Guiding Bit Adapters


With Aluminum Sleeve	With Plastic Sleeve

Keep bits from slipping. Insert a bit into the adapter, place a screw on the end of the bit, and slide the adapter sleeve over the screw. The sleeve retracts as the screw is driven. Use hex-shank bits (also known as insert bits) in drills and powered screwdrivers.

Plastic Sleeve—Plastic sleeve is clear so you can see that the bit is making contact.

	For Bit Shank Type	For Bit Hex Shank Size	For Max. Screw Head Dia.	Overall Lg.	Material	Sleeve Material		Each
Magnet Bit Holder



	1/4"	Hex	1/4"	3/8"	3 1/8"	Stainless Steel	Aluminum	52885A33	00000


	1/4"	Hex	1/4"	3/8"	4 5/8"	Stainless Steel	Aluminum	52885A34	0000
	1/4"	Hex	1/4"	3/8"	4 5/8"	Stainless Steel	Plastic	52885A36	0000

Long-Reach T-Handle Keys

An extra-long shaft reaches into spots where others come up short. Use these T-handle keys to tighten and loosen screws tucked deep in machinery. They have a wide grip for maximum leverage and control.

If the tip snaps off or wears down over time, replace it with a fresh one.

Steel—Our strongest, most wear-resistant T-handle keys. Steel is best for dry environments, since moisture will cause it to rust.

Cushion Grip—Avoid sore, blistered fingers when completing lengthy projects. These handles have a plastic coating that absorbs pressure for extra comfort.

	Drive Size	Grip Style	Overall Lg.		Each
Hex







				Steel

				5/64"	Cushion	13"	7300A28	000000


				5/64"	Cushion	19"	7300A88	00000
				5/64"	Cushion	25"	7300A6	00000
				3/32"	Cushion	13"	7300A29	00000
				3/32"	Cushion	19"	7300A89	00000
				3/32"	Cushion	25"	7300A7	00000
				7/64"	Cushion	13"	7300A31	00000
				7/64"	Cushion	19"	7300A51	00000
				7/64"	Cushion	25"	7300A21	00000
				1/8"	Cushion	13"	7300A32	00000
				1/8"	Cushion	19"	7300A52	00000


				1/8"	Cushion	25"	7300A22	00000
				9/64"	Cushion	13"	7300A33	00000
				9/64"	Cushion	19"	7300A53	00000
				9/64"	Cushion	25"	7300A23	00000
				5/32"	Cushion	13"	7300A34	00000
				5/32"	Cushion	19"	7300A54	00000
				5/32"	Cushion	25"	7300A24	00000
				3/16"	Cushion	13"	7300A35	00000
				3/16"	Cushion	19"	7300A55	00000
				3/16"	Cushion	25"	7300A61	00000


				7/32"	Cushion	13"	7300A36	00000
				7/32"	Cushion	19"	7300A56	00000
				7/32"	Cushion	25"	7300A25	00000
				1/4"	Cushion	13"	7300A37	00000
				1/4"	Cushion	19"	7300A57	00000
				1/4"	Cushion	25"	7300A62	00000
				5/16"	Cushion	13"	7300A38	00000
				5/16"	Cushion	19"	7300A58	00000
				5/16"	Cushion	25"	7300A63	00000
				3/8"	Cushion	13"	7300A39	00000


				3/8"	Cushion	19"	7300A59	00000
				3/8"	Cushion	25"	7300A64	00000
				2 mm	Cushion	13"	7167A41	00000
				2 mm	Cushion	19"	7167A61	00000
				2 mm	Cushion	25"	7167A11	00000
				2.5 mm	Cushion	13"	7167A42	00000
				2.5 mm	Cushion	19"	7167A62	00000
				2.5 mm	Cushion	25"	7167A12	00000
				3 mm	Cushion	13"	7167A43	00000
				3 mm	Cushion	19"	7167A63	00000


				3 mm	Cushion	25"	7167A13	00000
				4 mm	Cushion	13"	7167A44	00000
				4 mm	Cushion	19"	7167A64	00000
				4 mm	Cushion	25"	7167A14	00000
5 mm				Cushion	13"	7167A45	00000
5 mm	Cushion			19"	7167A65	00000
5 mm	Cushion			25"	7167A15	00000
6 mm	Cushion			13"	7167A46	00000
6 mm	Cushion			19"	7167A66	00000
6 mm	Cushion	25"		7167A16	00000
8 mm	Cushion	13"	7167A47	00000
8 mm	Cushion	19"	7167A67	00000
8 mm	Cushion	25"	7167A17	00000

Replacement Tips

Drive Size		Each
5/64"	7300A4	00000
3/32"	7300A5	0000
7/64"	7300A41	0000
1/8"	7300A42	0000
9/64"	7300A43	0000
5/32"	7300A44	0000
3/16"	7300A45	0000
7/32"	7300A46	0000
1/4"	7300A47	0000
5/16"	7300A48	0000
3/8"	7300A49	0000
2 mm	7167A51	0000
2.5 mm	7167A52	0000
3 mm	7167A53	0000
4 mm	7167A54	0000
5 mm	7167A55	0000
6 mm	7167A56	0000
8 mm	7167A57	0000

Tight-Clearance Bit Adapters

The head is angled 90° to drive fasteners in tight spaces. Use the pivoting handle to guide and steady the bit. These adapters hold hex-shank bits (also known as insert bits) and power bits in drills and powered screwdrivers.

				For Max. Drill
	Hex Shank Size	For Bit Shank Type	For Bit Hex Shank Size	Torque, in·lbf	Speed, rpm	Overall Lg.	Offset Angle		Each
Retaining-Ring Bit Holder



		1/4"	Hex, Quick-Change Hex	1/4"	235	1,750	6"	90°	5803A81	000000

Flexible Bit Adapters

Bend these adapters up to 90° to access hard-to-reach fasteners. Use hex-shank bits (also known as insert bits) in drills and powered screwdrivers.

	For Bit Shank Type	For Bit Hex Shank Size	For Max. Drill Torque, in·lbf	Overall Lg.	Material		Each
Magnet Bit Holder



	1/4"	Hex	1/4"	42	7 1/2"	Steel	85255A11	000000


	1/4"	Hex	1/4"	156	11"	Steel	85255A13	00000

Screw-Holding Bit Adapters

A magnetic ring at the end of the adapter holds flat-head screws in place to ensure good contact between the bit and screw. Use hex-shank bits (also known as insert bits) in drills and powered screwdrivers.

	For Bit Shank Type	For Bit Hex Shank Size	Overall Lg.	Screw-Holding Mechanism	Material		Each
Magnet Bit Holder



	1/4"	Hex	1/4"	2 3/4"	Magnet	Stainless Steel	6005A1	000000

Torque-Measuring Bit Adapters

Eliminate the need for multiple bulky tools with these bit adapters. At less than 3 inches long, these compact adapters convert _1/4" bit screwdriver handles and _1/4" bits into torque screwdrivers so you can fasten to a specific torque. Insert your drive handle and turn clockwise until the hash marks line up with the torque value you need. Not for use with power tools.

	Torque Range	Graduations	Clockwise Accuracy	Torque-Measuring Direction	Overall Lg.	Material		Each
Magnet Bit Holder







	Measures in·lbf

	1/4"	Hex	1/4"	6 in·lbf to 25 in·lbf	4 in·lbf, 5 in·lbf	±10%	Clockwise	2 3/16"	Steel	92733A110	000000


	1/4"	Hex	1/4"	15 in·lbf to 65 in·lbf	10 in·lbf	±10%	Clockwise	2 3/4"	Steel	92733A120	00000




			Measures N-m

			1/4"	Hex	1/4"	2 N-m to 6 N-m	1 N-m	±10%	Clockwise	2 3/4"	Steel	92733A130	00000

Long-Reach T-Handle Key Sets

An extra-long shaft reaches into spots where others come up short. Use these T-handle key sets to tighten and loosen screws tucked deep in machinery. They have a wide grip for maximum leverage and control.

If the tip snaps off or wears down over time, replace it with a fresh one.

Steel—Our strongest, most wear-resistant T-handle keys. Steel is best for dry environments, since moisture will cause it to rust.

Cushion Grip—Avoid sore, blistered fingers when completing lengthy projects. These handles have a plastic coating that absorbs pressure for extra comfort.

	Container Type		Each
Hex







	Steel

	7	7/64" Hex T-Handle Key (13" O'all Lg.) 1/8" Hex T-Handle Key (13" O'all Lg.) 9/64" Hex T-Handle Key (13" O'all Lg.) 5/32" Hex T-Handle Key (13" O'all Lg.) 3/16" Hex T-Handle Key (13" O'all Lg.) 7/32" Hex T-Handle Key (13" O'all Lg.) 1/4" Hex T-Handle Key (13" O'all Lg.)	Cushion	Metal Stand	7300A71	0000000


	7	2 mm Hex T-Handle Key (13" O'all Lg.) 2.5 mm Hex T-Handle Key (13" O'all Lg.) 3 mm Hex T-Handle Key (13" O'all Lg.) 4 mm Hex T-Handle Key (13" O'all Lg.) 5 mm Hex T-Handle Key (13" O'all Lg.) 6 mm Hex T-Handle Key (13" O'all Lg.) 8 mm Hex T-Handle Key (13" O'all Lg.)	Cushion	Metal Stand	7167A71	000000

Replacement Tips

Drive Size		Each
7/64"	7300A41	00000
1/8"	7300A42	0000
9/64"	7300A43	0000
5/32"	7300A44	0000
3/16"	7300A45	0000
7/32"	7300A46	0000
1/4"	7300A47	0000
2 mm	7167A51	0000
2.5 mm	7167A52	0000
3 mm	7167A53	0000
4 mm	7167A54	0000
5 mm	7167A55	0000
6 mm	7167A56	0000
8 mm	7167A57	0000