About Torque Tools
More
Screwdrivers
These standard screwdrivers can be found in every tool box.
For technical drawings and 3-D models, click on a part number.
Shaft | ||||||||
|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Lg. | O'all Wd. | Material | Finish | Handle Material | Each | |
| No. 00 | 5 1/2" | 3" | 1/8" | Steel | Black Oxide | Plastic | 0000000 | 00000 |
Ultra-Grip Screwdrivers
These screwdrivers have a soft, contoured handle that provides comfort and the best possible grip for achieving maximum torque.
Square drivers are also known as Robertson screwdrivers.
For technical drawings and 3-D models, click on a part number.
Shaft | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Drive Size | For Screw Size | Overall Lg. | Lg. | O'all Wd. | Material | Finish | Handle Material | Each | |
| No. 00 | No. 1, No. 2 | 5 9/16" | 2 3/8" | 1/8" | Steel | Chrome Plated | Plastic | 0000000 | 00000 |
Changeable-Shaft Factory-Set Torque Screwdrivers
Choose a handle based on torque and change shafts to use a different size or drive style. Handles are factory set to ensure you reach the same torque every time. They signal with an audible click when the set torque is reached. The torque setting cannot be adjusted. Handles have a contoured ulta grip for comfort. They come with a calibration certificate that is traceable to DIN and includes the test measurements that confirm accuracy.
| Drive Size | Shaft Material | Each | |
Phillips | |||
|---|---|---|---|
| No. 00 | Chrome-Plated Steel | 00000000 | 00000 |
Phillips Bits
Strong and durable, these multipurpose bits are often used with power tools to install sheet metal screws.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
For technical drawings and 3-D models, click on a part number.
JIS Bits
JIS (Japanese Industrial Standard) bits are designed for the fasteners used in electronics assembly. The tip has slightly sharper corners than Phillips style.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
For technical drawings and 3-D models, click on a part number.
Square Bits
Designed for screws with a square recess in the head, these are also known as Robertson bits.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
Mortorq® Bits
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Material | Each | |
1/4" Hex Shank Size | ||||
|---|---|---|---|---|
| No. 00 | 1" | Steel | 000000 | 000000 |
Precise-Control Screwdrivers
Press the rotating end cap on the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips. These tools are also known as precision and miniature screwdrivers.
For technical drawings and 3-D models, click on a part number.
Precise-Control Screwdriver Sets
Sets include an assortment of drivers with a rotating end cap on the handle that allows you to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips. They are also known as precision and miniature screwdrivers.
For technical drawings and 3-D models, click on a part number.
Screwdriver Sets | Foam Screwdriver Organizers | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Number of Pieces | Includes | Material | Finish | Handle Material | Container Type | Each | Each | ||
| 4 | No. 000 Phillips Screwdriver—4 3/4" O'all Lg. No. 00 Phillips Screwdriver—4 3/4" O'all Lg. No. 0 Phillips Screwdriver—5 3/4" O'all Lg. No. 1 Phillips Screwdriver—6 3/4" O'all Lg. | Steel | Chrome Plated | Plastic | __ | 00000000 | 000000 | 000000 | 00 |
| 7 | No. 00 Phillips Screwdriver—4 3/4" O'all Lg. No. 0 Phillips Screwdriver—5 3/4" O'all Lg. No. 1 Phillips Screwdriver—6 3/4" O'all Lg. 0.063" Slotted Screwdriver—4 3/4" O'all Lg. 0.079" Slotted Screwdriver—5 3/4" O'all Lg. 0.098" Slotted Screwdriver—5 3/4" O'all Lg. 0.118" Slotted Screwdriver—6 3/4" O'all Lg. | Steel | Chrome Plated | Plastic | __ | 00000000 | 00000 | 000000 | 000000 |
| 50 | Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 1/32", 0.039", 3/64", 1/16", 0.070", 5/64", 3/32", 1/8", 9/64", 5/32" Hex Screwdrivers (Inch): 0.028", 0.035", 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" Hex Screwdrivers (Metric): 1.27 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10 Nutdrivers: 1.5 mm, 1.8 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm 5 3/4" Lg. Chip Lifter | Steel | Chrome Plated | Plastic | Metal Frame | 00000000 | 000000 | 000000 | 00 |
Screw-Holding Precise-Control Screwdrivers
Push the handle's end cap to open the jaws at the tip; release to close around the screw. The end cap rotates, allowing you to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips. These tools are also known as jewelers' screwdrivers.
Shaft | ||||||||
|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Lg. | O'all Wd. | Material | Handle Material | Screw-Holding Mechanism | Each | |
Phillips | ||||||||
| No. 00 | 4 7/8" | 7/8" | 3/16" | Steel | Nickel-Plated Brass | Jaws | 000000 | 000000 |
Magnetic Screw-Holding Precise-Control Screwdriver Sets
A magnetized tip holds the screw in place. Press the rotating end cap on the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips. Sets include a handle and changeable shafts. These tools are also known as jewelers' screwdrivers.
| Number of Pieces | Includes | Material | Finish | Handle Material | Screw-Holding Mechanism | Container Type | Each | |
| 5 | No. 000 Phillips Shaft—4" O'all Lg. No. 00 Phillips Shaft—4" O'all Lg. No. 0 Phillips Shaft—4" O'all Lg. No. 1 Phillips Shaft—4" O'all Lg. Screwdriver Handle | Steel | Black Oxide | Aluminum | Magnet | Plastic Pouch | 0000000 | 000000 |
Replaceable-Tip Precise-Control Screwdrivers
The tip can be replaced when it becomes worn. Also known as jewelers' screwdrivers, these tools have a rotating end cap on the handle that allows you to apply constant pressure with your palm while turning the body of the driver with your fingertips.
Replaceable-Tip Precise-Control Screwdriver Sets
Sets include an assortment of drivers with a tip that can be replaced when it becomes worn. Also known as jewelers' screwdrivers, these tools have a rotating end cap on the handle that lets you apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.
| Number of Pieces | Includes | Material | Finish | Handle Material | Container Type | Each | |
| 4 | No. 000 Phillips Screwdriver—4" O'all Lg. No. 00 Phillips Screwdriver—4" O'all Lg. No. 0 Phillips Screwdriver—4" O'all Lg. No. 1 Phillips Screwdriver—4" O'all Lg. | Steel | Black Oxide | Steel | Plastic Pouch | 0000000 | 000000 |
Static-Control Precise-Control Screwdriver Sets
The handle on these assorted ESD-safe screwdrivers drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. They meet IEC 61340-5-1 requirements for protecting electronic devices from electrostatic discharge. Press the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.
Warning: Because the handle conducts electricity, screwdrivers must not come in contact with sources of electrical power.
| Number of Pieces | Includes | Material | Handle Material | Surface Resistivity, ohms-cm. | Each | |
| 7 | No. 00 Phillips Screwdriver—4 23/32" O'all Lg. No. 0 Phillips Screwdriver—5 23/32" O'all Lg. No. 1 Phillips Screwdriver—6 11/16" O'all Lg. 0.059" Slotted Screwdriver—4 23/32" O'all Lg. 0.079" Slotted Screwdriver—4 23/32" O'all Lg. 0.098" Slotted Screwdriver—5 23/32" O'all Lg. 0.138" Slotted Screwdriver—6 11/16" O'all Lg. | Chrome-Plated Steel | Plastic | 106-109 | 0000000 | 000000 |
| 50 | Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 0.031", 0.039", 0.047", 0.059", 0.079", 0.098", 0.118", 0.138", 0.157" Hex Screwdrivers (Inch): 1/16", 3/32", 7/64", 1/8" Hex Screwdrivers (Metric): 0.7 mm, 0.9 mm, 1.3 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T15, T20 Nutdrivers: (Metric) 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm; (Inch): 1/8", 5/32", 3/16", 1/4" 5 3/4" Lg. Chip Lifter | Chrome-Plated Steel | Plastic | 106-109 | 0000000 | 000000 |
Static-Control Precise-Control Screwdrivers
Also known as ESD-safe screwdrivers, the handle drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. Press the rotating end cap on the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.
Static-dissipative drivers divert static electricity faster than antistatic drivers. They meet IEC 61340-5-1 requirements for protecting electronic devices from electrostatic discharge.
Warning: Because the handle conducts electricity, screwdrivers must not come in contact with sources of electrical power.
For technical drawings and 3-D models, click on a part number.
Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Lg. | O'all Wd. | Material | Finish | Handle Material | Electrical Properties | Specifications Met | Surface Resistivity | Each | |
Phillips | |||||||||||
| No. 00 | 5 5/16" | 1 5/8" | 3/32" | Steel | Chrome Plated | Plastic | Static Dissipative | IEC 61340-5-1 | 106-109 ohms-cm. | 0000000 | 000000 |
Electrical-Insulating Precise-Control Screwdriver Sets
The assorted drivers in these sets have an insulated handle and shaft that protect against shock from accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC, EN, or ASTM standards. Use the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips. They're also known as precision and miniature screwdrivers.
For technical drawings and 3-D models, click on a part number.
| Number of Pieces | Includes | Material | Handle Material | Specifications Met | Each | |
| 8 | No. 00 Phillips Screwdriver—5 15/16" O'all Lg. No. 0 Phillips Screwdriver—6 1/2" O'all Lg. No. 1 Phillips Screwdriver—6 1/2" O'all Lg. 0.059" Slotted Screwdriver—5 15/16" O'all Lg. 0.079" Slotted Screwdriver—5 15/16" O'all Lg. 0.098" Slotted Screwdriver—6 1/2" O'all Lg. 0.118" Slotted Screwdriver—6 1/2" O'all Lg. 0.138" Slotted Screwdriver—6 1/2" O'all Lg. | Plastic-Coated Steel | Plastic | IEC 60900, EN 60900, ASTM F1505 | 00000000 | 000000 |
Electrical-Insulating Precise-Control Screwdrivers
An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC, EN, or ASTM standards. Press the rotating end cap on the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips. They’re also known as precision and miniature screwdrivers.
For technical drawings and 3-D models, click on a part number.
Shaft | ||||||||
|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Lg. | O'all Wd. | Material | Handle Material | Specifications Met | Each | |
Phillips | ||||||||
| No. 00 | 5 15/16" | 1 5/8" | 1/8" | Plastic-Coated Steel | Plastic | IEC 60900, EN 60900, ASTM F1505 | 00000000 | 000000 |