No. 000 Screwdrivers | McMaster-Carr

Make fine-tuned adjustments on a variety of small, delicate components, such as electronics, miniature models, and microscopes. These screwdriver sets give you better control than a standard screwdriver to avoid stripping tiny screws or cracking fragile materials. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips. They are also known as precision and miniature screwdrivers.

Black-Oxide Steel—These screwdrivers withstand occasional moisture.

Chrome-Plated Steel—The bright, shiny plating resists salt water and chemicals better than other finishes and is less likely to wear off.

Knurled Grip Texture—Get the best possible grip, even with wet or oily fingers.

Plain Grip—Made of hard plastic for durability.

	Includes	Material	Grip Texture	Grip Style	Container Type		Each
Phillips



	4	No. 000 Phillips Screwdriver—4 3/4" O'all Lg. No. 00 Phillips Screwdriver—4 3/4" O'all Lg. No. 0 Phillips Screwdriver—5 3/4" O'all Lg. No. 1 Phillips Screwdriver—6 3/4" O'all Lg.	Chrome-Plated Steel	—	Plain	—	00000000	000000


	4	No. 000 Phillips Screwdriver—4" O'all Lg. No. 00 Phillips Screwdriver—4" O'all Lg. No. 0 Phillips Screwdriver—4" O'all Lg. No. 1 Phillips Screwdriver—4" O'all Lg.	Black-Oxide Steel	Knurled Grip Texture	Plain	Plastic Pouch	0000000	00000


	Hex, Phillips, Slotted, Torx



			50	5 3/4" Lg. Chip Lifter Hex Screwdrivers: 0.028", 0.035", 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" Hex Screwdrivers: 1.27 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Nutdrivers: 1.5 mm, 1.8 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 1/32", 0.039", 3/64", 1/16", 0.070", 5/64", 3/32", 1/8", 9/64", 5/32" Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10	Chrome-Plated Steel	—	Plain	Metal Stand	00000000	000000

Static-Control Precise-Control Screwdriver Sets

Protect delicate microelectronics from harmful static shocks. Also known as ESD-safe screwdrivers, these meet IEC requirements to drain static away from your workpiece before it causes damage. Precise-control screwdrivers allow for nimble, fine-tuned adjustments. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.

Warning: These screwdrivers conduct electricity. Do not use them near active power sources.

Chrome-Plated Steel—The bright, shiny plating resists salt water and chemicals better than other finishes and is less likely to wear off.

Plain Grip—Made of hard plastic for durability.

	Includes	Material	Grip Style	Container Type	Static Control Rating	Surface Resistivity	Specs. Met		Each
Hex, Phillips, Slotted, Torx



	50	5 3/4" Lg. Chip Lifter Hex Screwdrivers: 0.7 mm, 0.9 mm, 1.3 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Hex Screwdrivers: 1/16", 3/32", 7/64", 1/8" Nutdrivers: 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 1/8", 5/32", 3/16", 1/4" Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 0.031", 0.039", 0.047", 0.059", 0.079", 0.098", 0.118", 0.138", 0.157" Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T15, T20	Chrome-Plated Steel	Plain	Metal Stand	Static Dissipative	1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm	IEC 61340-5-1	0000000	0000000

Precise-Control Screwdrivers

Plain Grip

Knurled Grip Texture

Make fine-tuned adjustments on small, delicate components, such as electronics, miniature models, and microscopes. These screwdrivers give you better control than a standard screwdriver to avoid stripping tiny screws or cracking fragile materials. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips. They are also known as precision and miniature screwdrivers.

Black-Oxide Steel—These screwdrivers withstand occasional moisture.

Chrome-Plated Steel—The bright, shiny plating resists salt water and chemicals better than other finishes and is less likely to wear off.

Knurled Grip Texture—Get the best possible grip, even with wet or oily fingers.

Plain Grip—Made of hard plastic for durability.

	Screwdrivers								Replacement Tips
			Shaft
	Drive Size	Overall Lg.	Lg.	Overall Wd.	Grip Texture	Grip Style		Each		Each
Phillips







				Black-Oxide Steel

				No. 000	4"	1 1/4"	3/32"	Knurled Grip Texture	Plain	0000000	000000	0000000	00000




						Chrome-Plated Steel

						No. 000	4 3/4"	1 5/8"	3/32"	—	Plain	00000000	0000	———	0

Phillips Bits

Hex Shank

Quick-Change Hex

Shank

One of the most common drive styles for good reason. Phillips bits align easily with fasteners and deliver more torque than slotted bits.

Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).

Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.

Steel—Best for dry environments, since moisture will cause these bits to rust.

	Material		Each
For Hand Tools







	4 mm Hex Shank Size

	No. 000	No. 000	1 1/8"	Steel	0000000	00000


	For Power Tools







					1/4" Quick-Change Hex Shank Size

					No. 000	No. 000	2"	Steel	0000000	0000

Screw-Holding Precise-Control Screwdriver Sets

Keep even the smallest screws from falling into cracks. A magnet at the tip grips fasteners tightly, so you don't have to fumble with your fingers. These sets are perfect for delicate tasks that require nimble, fine-tuned adjustments. Push the end of the handle to open the jaws, then release to lock the jaws around the screw head.

Black-Oxide Steel—These screwdrivers withstand occasional moisture.

Knurled Grip Texture—Get the best possible grip, even with wet or oily fingers.

Plain Grip—Made of hard plastic for durability.

	Includes	Material	Screw-Holding Mechanism	Grip Texture	Grip Style	Container Type		Each
Phillips



	5	No. 000 Phillips Shaft—4" O'all Lg. No. 00 Phillips Shaft—4" O'all Lg. No. 0 Phillips Shaft—4" O'all Lg. No. 1 Phillips Shaft—4" O'all Lg. Screwdriver Handle	Black-Oxide Steel	Magnet	Knurled Grip Texture	Plain	Plastic Pouch	0000000	000000

Changeable-Shaft Factory-Set Torque Screwdrivers

Choose a handle based on torque and change shafts to use a different size or drive style. Handles are factory set to ensure you reach the same torque every time. They signal with an audible click when the set torque is reached. The torque setting cannot be adjusted. Handles have a contoured ulta grip for comfort. They come with a calibration certificate that is traceable to DIN and includes the test measurements that confirm accuracy.

Driver Shafts

	Shaft Material		Each
For Phillips Drives



	No. 000	Chrome-Plated Steel	00000000	00000

Static-Control Precise-Control Screwdrivers

Protect delicate microelectronics from harmful static shocks. Also known as ESD-safe screwdrivers, they drain static away from your workpiece before it causes damage. Precise-control screwdrivers allow for nimble, fine-tuned adjustments. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.

Warning: These screwdrivers conduct electricity. Do not use them near active power sources.

Chrome-Plated Steel—The bright, shiny plating resists salt water and chemicals better than other finishes and is less likely to wear off.

Plain Grip—Made of hard plastic for durability.

Static Dissipative—Drain static charges faster than antistatic screwdrivers. They meet IEC requirements for preventing the buildup of electrostatic discharge.

			Shaft
	Drive Size	Overall Lg.	Lg.	Overall Wd.	Grip Style	Static Control Rating	Surface Resistivity	Specs. Met		Each
Phillips







				Chrome-Plated Steel

				No. 000	5 5/16"	1 5/8"	3/32"	Plain	Static Dissipative	1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm	IEC 61340-5-1	0000000	000000