7 mm Drive Screws | McMaster-Carr

Filter by

System of Measurement

Thread Size

Length

Socket Head Profile

Material

Head Height

Thread Pitch

Fastener Head Type

Threading

Drive Style

Hex with Pilot Recess

Tamper-Resistant Torx

Torx

Fastener Strength Grade/Class

Drive Size

Head Diameter

Finish

Thread Direction

Thread Type

Sold As

Specifications Met

DFARS Specialty Metals

Thread Spacing

Tensile Strength

30,000 psi to 99,999 psi

100,000 psi or greater

Hardness

RoHS

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

REACH

72 Products

Low-Profile Steel Socket Head Screws

Fully Threaded

Partially Threaded

With a head approximately half the height of standard-profile ones, these screws are less likely to snag on components. However, they aren't as strong as screws with larger heads. Tighten with a hex key.

Length is measured from under the head.

Black-Oxide Alloy Steel—Typically chosen for their appearance, these screws have a dark, matte coating to create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.

Zinc-Plated Alloy Steel—A common choice for areas with occasional exposure to moisture.

		Head, mm
	Lg., mm	Dia.	Ht.	Threading	Thread Spacing	Tensile Strength, psi	Fastener Strength Grade/Class	Pkg. Qty.		Pkg.
Black-Oxide Alloy Steel







				M10 × 1.5 mm

				16	16	6	Fully Threaded	Coarse	110,000	Class 8.8	10	93070A211	00000


				20	16	6	Fully Threaded	Coarse	110,000	Class 8.8	25	93070A213	00000
				25	16	6	Fully Threaded	Coarse	110,000	Class 8.8	25	93070A215	00000
				30	16	6	Fully Threaded	Coarse	110,000	Class 8.8	10	93070A217	0000
				35	16	6	Fully Threaded	Coarse	110,000	Class 8.8	10	93070A219	0000
				40	16	6	Partially Threaded	Coarse	110,000	Class 8.8	10	93070A221	0000
				45	16	6	Partially Threaded	Coarse	110,000	Class 8.8	10	93070A184	0000
				50	16	6	Partially Threaded	Coarse	110,000	Class 8.8	10	93070A223	00000
				55	16	6	Partially Threaded	Coarse	110,000	Class 8.8	10	93070A185	00000
				60	16	6	Partially Threaded	Coarse	110,000	Class 8.8	10	93070A226	00000
				80	16	6	Partially Threaded	Coarse	110,000	Class 8.8	1	93070A186	0000


				Zinc-Plated Alloy Steel







								M10 × 1.5 mm

								16	16	6	Fully Threaded	Coarse	110,000	Class 8.8	10	90327A175	0000


								20	16	6	Fully Threaded	Coarse	110,000	Class 8.8	10	90327A176	0000
								25	16	6	Fully Threaded	Coarse	110,000	Class 8.8	10	90327A177	0000
								30	16	6	Partially Threaded	Coarse	110,000	Class 8.8	10	90327A178	0000
								35	16	6	Partially Threaded	Coarse	110,000	Class 8.8	10	90327A179	00000
								40	16	6	Partially Threaded	Coarse	110,000	Class 8.8	10	90327A181	0000

Low-Profile Stainless Steel Socket Head Screws

Fully Threaded

Partially Threaded

With a head approximately half the height of standard-profile ones, these corrosion-resistant screws are less likely to snag on components. However, they aren't as strong as stainless steel screws with larger heads. Tighten with a hex key.

Length is measured from under the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel screws can.

Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel screws, these screws won't degrade when exposed to harsh weather, salt water, and most chemicals.

		Head, mm
	Lg., mm	Dia.	Ht.	Threading	Thread Spacing	Tensile Strength, psi	Pkg. Qty.		Pkg.
18-8 Stainless Steel







				M10 × 1.5 mm

				16	16	6	Fully Threaded	Coarse	70,000	10	92855A750	000000


				20	16	6	Fully Threaded	Coarse	70,000	10	92855A753	00000
				25	16	6	Fully Threaded	Coarse	70,000	10	92855A756	00000
				30	16	6	Fully Threaded	Coarse	70,000	5	92855A759	00000
				60	16	6	Partially Threaded	Coarse	70,000	5	92855A777	00000


				Highly Corrosion-Resistant 316 Stainless Steel







								M10 × 1.5 mm

								16	16	6	Fully Threaded	Coarse	70,000	10	90666A143	00000


								20	16	6	Fully Threaded	Coarse	70,000	10	90666A144	00000
								25	16	6	Fully Threaded	Coarse	70,000	5	90666A145	0000
								30	16	6	Fully Threaded	Coarse	70,000	5	90666A146	0000
								35	16	6	Fully Threaded	Coarse	70,000	5	90666A147	00000
								40	16	6	Partially Threaded	Coarse	70,000	5	90666A148	00000

Ultra-Low-Profile Stainless Steel Socket Head Screws

Corrosion resistant, with the lowest profile of our socket head screws. About one-third the height of standard-profile heads, they fit in the tightest spaces and shallowest holes, reducing the risk of snagging. However, they aren't as strong as screws with larger heads. Tighten with a hex key.

Length is measured from under the head.

Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel screws, these screws won't degrade when exposed to harsh weather, salt water, and most chemicals.

		Head, mm		Shoulder, mm
	Lg., mm	Dia.	Ht.	Dia.	Lg.	Threading	Thread Spacing	Tensile Strength, psi		Each
Highly Corrosion-Resistant 316 Stainless Steel







				M10 × 1.5 mm

				12	16	3.3	11	3.3	Fully Threaded	Coarse	70,000	91223A458	00000


				16	16	3.3	11	3.3	Fully Threaded	Coarse	70,000	91223A459	0000
				20	16	3.3	11	3.3	Fully Threaded	Coarse	70,000	91223A461	0000
				25	16	3.3	11	3.3	Fully Threaded	Coarse	70,000	91223A462	00000
				30	16	3.3	11	3.3	Fully Threaded	Coarse	70,000	91223A463	00000
				40	16	3.3	11	3.3	Fully Threaded	Coarse	70,000	91223A464	00000
				50	16	3.3	11	3.3	Fully Threaded	Coarse	70,000	91223A465	00000
				60	16	3.3	11	3.3	Fully Threaded	Coarse	70,000	91223A466	00000

Ultra-Low-Profile Steel Socket Head Screws

Our lowest-profile socket head screws. At about one-third the height of standard ones, these fit in the tightest spaces and shallowest holes, reducing the risk of snagging. However, they aren't as strong as screws with larger heads. Tighten with a hex key.

Length is measured from under the head.

		Head, mm
	Lg., mm	Dia.	Ht.	Threading	Thread Spacing	Tensile Strength, psi		Each
Black-Oxide Alloy Steel







				M10 × 1.5 mm

				25	16	3.3	Fully Threaded	Coarse	140,000	90358A032	00000


				30	16	3.3	Fully Threaded	Coarse	140,000	90358A033	0000
				35	16	3.3	Fully Threaded	Coarse	140,000	90358A034	00000
				40	16	3.3	Fully Threaded	Coarse	140,000	90358A035	00000

Bit Sets

Hex Shank

Have a range of bits ready to turn the most common screw styles and sizes.

Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).

Steel—Best for dry environments, since moisture will cause these bits to rust.

	Adapters Included	Material	Container Type		Each
For Hand Tools







	1/4" Hex Shank Size

	100	4 Adapters 96 Bits	Drilled Spanner: No. 4, No. 6, No. 8, No. 10, No. 12, 1/4" (1" O'all Lg.)—1 ea. Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (1" O'all Lg.)—1 ea. Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm (1" O'all Lg.)—1 ea. Phillips: No. 0 (1" O'all Lg.)—1 ea. Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea. Phillips: No. 2 (1" O'all Lg.)—4 ea. Pozidriv®: No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea. Screw-In Hook Driver Bit—1 ea. Slotted: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8" (1" O'all Lg.)—1 ea. Square: No. 0, No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Inch): 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16" (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Metric): 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea. Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea. Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, T45, T50, T55 (1" O'all Lg.)—1 ea.	1/4" Male Square Drive × 1/4" Hex Shank Adapter (1" O'all Lg.) 1/4" Male Square Drive × 1/4" Hex Shank Adapter (2" O'all Lg.) 2 1/2" Lg. Bit Adapter for Power Tools Bit Adapter for Square Drive Tools	Steel	Plastic Case	2599N1	000000

Angled-Drive Ball-Tip L-Key Sets


	Plastic Caddy

Reach corners and tight spaces with the sizes you use most. These L-keys turn screws at an angle when you can’t access them head on. They have a ball tip on the long leg that engages the drive with less contact than a straight tip. Ball tips are handy for corners and tightly-packed areas, such as control panels and junction boxes. However, they don’t grip as tightly as straight tips, and may strip the drive of the fastener if you crank them too hard. These L-keys are precision manufactured to tight tolerances.

Alloy Steel—These L-keys handle high torque without bending or breaking, so they’ll last a lifetime.

Long—The most common option, these L-keys have a balanced length for everyday reach and torque.

Extra Long—Reach deep fasteners with the extra-long leg on these L-keys. Flip them around and grip the long leg with two hands for extra leverage to loosen stubborn screws.

				Ball
	No. of Pieces	Includes	Relative Lg.	Location	Shape	Max. Access Angle	Finish	Container Type		Each
Alloy Steel







				Hex

				15	1.27 mm Hex L-Key (2 7/8" O'all Lg.) 1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 3.5 mm Hex L-Key (4 1/8" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 4.5 mm Hex L-Key (4 11/16" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 5.5 mm Hex L-Key (5 3/16" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 7 mm Hex L-Key (5 13/16" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 9 mm Hex L-Key (6 5/8" O'all Lg.) 10 mm Hex L-Key (7 3/16" O'all Lg.)	Long	Single Ball	Round	25°	Black Phosphate Coated	Plastic Caddy	5709A45	000000


				15	1.27 mm Hex L-Key (2 7/8" O'all Lg.) 1.5 mm Hex L-Key (3 1/8" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4" O'all Lg.) 3.5 mm Hex L-Key (4 1/8" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 4.5 mm Hex L-Key (4 3/4" O'all Lg.) 5 mm Hex L-Key (4 7/8" O'all Lg.) 5.5 mm Hex L-Key (5 1/8" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 7 mm Hex L-Key (5 7/8" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 9 mm Hex L-Key (6 5/8" O'all Lg.) 10 mm Hex L-Key (7 1/8" O'all Lg.)	Long	Single Ball	Round	25°	Blue Painted	Plastic Caddy	5786A1	00000
				15	1.27 mm Hex L-Key (2 7/8" O'all Lg.) 1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 3.5 mm Hex L-Key (4 1/8" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 4.5 mm Hex L-Key (4 11/16" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 5.5 mm Hex L-Key (5 3/16" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 7 mm Hex L-Key (5 13/16" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 9 mm Hex L-Key (6 5/8" O'all Lg.) 10 mm Hex L-Key (7 3/16" O'all Lg.)	Long	Single Ball	Round	25°	Gold Painted	Plastic Caddy	7813A15	00000
				15	1.27 mm Hex L-Key (2 7/8" O'all Lg.) 1.5 mm Hex L-Key (3 9/16" O'all Lg.) 2 mm Hex L-Key (4" O'all Lg.) 2.5 mm Hex L-Key (4 1/2" O'all Lg.) 3 mm Hex L-Key (5 1/8" O'all Lg.) 3.5 mm Hex L-Key (5 3/8" O'all Lg.) 4 mm Hex L-Key (5 13/16" O'all Lg.) 4.5 mm Hex L-Key (6 1/8" O'all Lg.) 5 mm Hex L-Key (6 1/2" O'all Lg.) 5.5 mm Hex L-Key (7 1/16" O'all Lg.) 6 mm Hex L-Key (7 1/16" O'all Lg.) 7 mm Hex L-Key (7 1/2" O'all Lg.) 8 mm Hex L-Key (8 1/16" O'all Lg.) 9 mm Hex L-Key (8 3/8" O'all Lg.) 10 mm Hex L-Key (8 13/16" O'all Lg.)	Extra Long	Single Ball	Round	25°	Chrome Plated	Plastic Caddy	5888A45	00000

L-Key Sets


Plastic Caddy	With Plastic Ring

Keep the most common L-key sizes in one portable set so the right size is always ready. These L-keys are precision manufactured to tight tolerances for an exact fit.

Alloy Steel—These L-keys handle high torque without bending or breaking, so they’ll last a lifetime.

Long—The most common option, these L-keys have a balanced length for everyday reach and torque.

	Finish	Container Type		Each
Alloy Steel







	Hex

	11	1.5 mm Hex L-Key (3 1/8" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 4 mm Hex L-Key (4 5/16" O'all Lg.) 5 mm Hex L-Key (4 7/8" O'all Lg.) 6 mm Hex L-Key (5 11/16" O'all Lg.) 7 mm Hex L-Key (6 9/16" O'all Lg.) 8 mm Hex L-Key (6 5/8" O'all Lg.) 9 mm Hex L-Key (7" O'all Lg.) 10 mm Hex L-Key (7 1/16" O'all Lg.)	Long	Black Oxide	Plastic Ring	37355A21	000000


	15	1.27 mm Hex L-Key (2 7/8" O'all Lg.) 1.5 mm Hex L-Key (3 1/8" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/8" O'all Lg.) 3.5 mm Hex L-Key (4 1/8" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 4.5 mm Hex L-Key (4 3/4" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 5.5 mm Hex L-Key (5 1/8" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 7 mm Hex L-Key (5 7/8" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 9 mm Hex L-Key (6 5/8" O'all Lg.) 10 mm Hex L-Key (7 1/8" O'all Lg.)	Long	Black Phosphate Coated	Plastic Caddy	7158A7	00000

L-Keys

The highest quality L-keys you can buy for tightening and loosening screws. Our L-keys are precision manufactured to tight tolerances for an exact fit.

Alloy Steel—These L-keys handle high torque without bending or breaking, so they’ll last a lifetime.

Stainless Steel—These L-keys resist corrosion from salt water and other chemicals. Use them with stainless steel screws to avoid contaminating the drive—unlike steel tools, they won’t shed flakes that can rust.

Short—A short long leg fits into tight spaces where you have less room to swing, making these ideal for confined areas.

Long—The most common option, these L-keys have a balanced length for everyday reach and torque.

Extra Long—Reach deep fasteners with the extra-long leg on these L-keys. Flip them around and grip the long leg with two hands for extra leverage to loosen stubborn screws.

		Length						Each		Package
	Drive Size, mm	Overall	Relative	Long Leg	Short Leg	Finish	Specs. Met		Each	Pkg. Qty.		Pkg.
Alloy Steel







				Hex

				7	3 15/16"	Short	3 11/16"	1 5/16"	Chrome Plated	—	53475A38	00000	25	53475A381	000000


				7	3 15/16"	Short	3 11/16"	1 3/8"	Black Oxide	—	7289A34	0000	25	7289A341	00000
				7	6"	Long	5 3/4"	1 3/16"	Zinc Plated	—	9766N95	0000	25	9766N355	00000
				7	6 1/2"	Long	6 3/16"	1 3/8"	Black Oxide	—	6958A33	0000	25	6958A331	00000
				7	8 3/4"	Extra Long	8 1/2"	1 3/8"	Black Oxide	—	7122A741	0000	25	7122A186	00000




						Hex with Pilot

						7	4"	Short	3 3/4"	1 5/16"	Zinc Plated	DIN 6911	4585N17	0000	—	———	0


						Stainless Steel







										Hex

										7	4 1/2"	Long	4 1/8"	1 1/4"	__	—	53855A47	00000	—	———	0

Fixture Clamps

Hold a workpiece securely from the side with minimal contact, leaving more of the workpiece free for machining. Thread the clamp into a tapped hole and give the center screw a half turn for quick clamping.

Head					Thread		Drive			Each		Package
Wd., mm	Ht., mm	Max. Movement, mm	Material	Max. Clamping Force, lbf	Size	Lg., mm	Size, mm	Style	Screw Material		Each	Pkg. Qty.		Pkg.



	20.61	6.35	1.27	Brass	1,950	M10 × 1.5 mm	19	7	Hex	Steel	84865A84	000000	10	84865A94	000000

Hex Bits

Hex Shank

Quick-Change Hex

Shank

With six contact points, these bits handle more torque than slotted and Phillips bits without slipping and stripping the drive.

Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).

Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.

Steel—Best for dry environments, since moisture will cause these bits to rust.

		Each
For Hand Tools







	1/4" Hex Shank Size

	7	1"	Steel	7389A44	00000


	For Power Tools







					1/4" Quick-Change Hex Shank Size

					7	2"	Steel	7397A57	0000

Ball-Tip Screwdrivers

Image of ProductInUse. Front orientation. Contains Annotated.

Turn screws even when you can't access them head on. These screwdrivers are handy in corners and underneath machinery because their ball tip can engage fasteners at an angle. While they're great for most fastening jobs, the tip makes less contact with fastener recesses than standard, straight tips and may snap off under extremely high torque.

The handle on these drivers has a rubberized, cushioned grip over a hard plastic core for comfort and control.

Standard Length—The most common screwdriver length for a specific drive size.

Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.

				Shaft
	Drive Size, mm	Relative Lg.	Overall Lg.	Lg.	Overall Wd.	Max. Access Angle	Material	Mfr.		Each
Hex







				Premium

				7	Standard	10 1/2"	5 11/16"	9/32"	25°	Phosphate-Coated Steel	Bondhus	5497A13	00000

Angled-Drive Ball-Tip L-Keys

Turn screws at an angle when you can’t access them head on. These L-keys have a ball tip on the long leg that engages the drive with less contact than a straight tip. Ball tips are handy for corners and tightly packed areas, such as control panels and junction boxes. However, they don’t grip as tightly as straight tips and may strip the drive of the fastener if you crank them too hard. These L-keys are precision manufactured to tight tolerances.

Alloy Steel—These L-keys handle high torque without bending or breaking, so they’ll last a lifetime.

Long—The most common option, these L-keys have a balanced length for everyday reach and torque.

		Length				Ball
	Drive Size, mm	Overall	Relative	Long Leg	Short Leg	Location	Shape	Finish	Max. Access Angle		Each
Alloy Steel







				Hex

				7	5 13/16"	Long	5 1/2"	1 5/16"	Single Ball	Round	Black Phosphate Coated	25°	5503A47	00000

Angled-Drive Ball-Tip T-Handle Keys

Ultra Grip

Turn screws at an angle when you can't access them head on. These T-handle keys have a ball tip that engages the drive with less contact than a straight tip. They're handy for reaching screws in corners and underneath large machines, such as lathes and CNC mills. However, ball tips don't grip as tightly as straight tips and may strip threads if you crank them too hard. The highest-quality T-handle keys you can find, these are made of hardened steel to last a lifetime in your tool kit.

Black-Oxide Steel—The dark, matte coating offers minimal corrosion resistance, so these T-handle keys are best for dry environments.

Ultra Grip—Designed for maximum comfort and slip resistance. The plastic coating and textured surface reduce strain and guarantee a secure grip, even when working with wet or oily fingers.

				Long
	Drive Size, mm	Grip Style	Max. Access Angle	Overall Lg.		Each
Hex







				Black-Oxide Steel

				7	Ultra Grip	20°	10"	37165A44	000000

Fold-Up L-Key Sets

Ultra Grip

Multiple L-keys fold up in the handle for easy carrying, similar to a Swiss army knife. Slip these sets in your pocket and never worry about misplacing individual keys. The handle gives you leverage to tighten with minimal effort.

Ultra Grip— The textured handle adds cushioning and is easy to grip with wet or oily hands.

Alloy Steel—These L-keys handle high torque without bending or breaking, so they’ll last a lifetime.

					Handle
	No. of Sizes	Drive Size	Max. Fold-Out Angle	Material	Lg.	Material	Color		Each
Ultra Grip







				Hex

				8	2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm	180°	Black-Oxide Alloy Steel	5 1/4"	Plastic	Blue	5215A23	000000

T-Handle Keys

Cushion Grip

Ultra Grip

Crank screws in large, heavy duty machinery, such as engines and CNC mills. A wide handle gives you maximum leverage, and a long shaft reaches into deep pockets. The shaft is permanently bonded to the handle for a secure hold that won't break under high torque. To prevent slipping, these T-handle keys are precision manufactured to tight tolerances for an exact fit. They're made of hardened steel or stainless steel to last a lifetime in your tool kit.

Black-Oxide Steel—The dark, matte coating offers minimal corrosion resistance, so these T-handle keys are best for dry environments.

Phosphate-Coated Steel—The dark, matte coating resists rust in most wet and outdoor applications. However, it won't hold up to salt water and chemicals.

Cushion Grip—Avoid sore, blistered fingers when completing lengthy projects. These handles have a plastic coating that absorbs pressure for extra comfort.

Ultra Grip—Designed for maximum comfort and slip resistance. The plastic coating and textured surface reduce strain and guarantee a secure grip, even when working with wet or oily fingers.

			Standard Length			Long
	Drive Size, mm	Grip Style	Overall Lg.		Each	Overall Lg.		Each
Hex







				Black-Oxide Steel

				7	Ultra Grip	7"	4973A53	000000	10"	4973A83	000000




						Phosphate-Coated Steel

						7	Cushion	6"	5374A65	00000	—	———	0

Nonmagnetic Screwdrivers

These drivers safely fasten screws on everything from MRI machines to semiconductor equipment without getting pulled inside by strong magnetic forces. The grade 5 titanium shaft is nonmagnetic and resistant to many chemicals.

Also ideal for industrial maintenance, these no-frills screwdrivers withstand years of heavy use in the shop and on the jobsite. The hard plastic handle won't crack or wear out from drops and scrapes. It's also easy to wipe down and won't get sticky or gummy when exposed to oils or chemicals, unlike a soft handle.

Standard Length—The most common screwdriver length for a specific drive size.

				Shaft
	Drive Size, mm	Relative Lg.	Overall Lg.	Lg.	Overall Wd.	Material	Mfr.		Each
Hex







				Premium

				7	Standard	7 1/4"	4"	3/8"	Titanium	Imprex International	54035A17	0000000

Nonsparking L-Key Sets

Made of beryllium copper that is Factory Mutual (FM) approved, these L-key sets won't create sparks when scraped, struck, or dropped. They help you meet OSHA requirements when fastening screws in hazardous environments where flammable liquid, dust, or gas could be lurking. Use them everywhere from oil and gas refineries to paper mills.

Warning: Do not use these tools in direct contact with acetylene.

Short—A short long leg fits into tight spaces where you have less room to swing, making these ideal for confined areas.

	Finish	Container Type	Specifications Met		Each
Beryllium Copper







	Hex

	10	1.5 mm Hex L-Key (2 9/16 O'all Lg.) 2 mm Hex L-Key (2 9/16" O'all Lg.) 3 mm Hex L-Key (2 5/8" O'all Lg.) 4 mm Hex L-Key (2 15/16" O'all Lg.) 5 mm Hex L-Key (3 5/16" O'all Lg.) 6 mm Hex L-Key (3 13/16" O'all Lg.) 7 mm Hex L-Key (4 1/16" O'all Lg.) 8 mm Hex L-Key (4 5/16" O'all Lg.) 9 mm Hex L-Key (4 1/2" O'all Lg.) 10 mm Hex L-Key (4 3/4" O'all Lg.)	Short	__	Canvas Pouch	FM Approved	6522A42	0000000