McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    393 Products

    Stainless Steel Fillister Head Slotted Screws

    Image of Product. Front orientation. Rounded Head Screws. Stainless Steel Fillister Head Slotted Screws.
    The most corrosion-resistant fillister head slotted screws we offer. With a deeper drive than others, fillister heads reduce the likelihood that basic slotted drivers slip as you hand-tighten them. Since they also have a narrow diameter, they fit into tight spaces, such as holes tucked away inside machinery.
    Length is measured from under the head.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel can.
    Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these screws won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Head
    Lg.
    Dia.
    Ht.
    Threading
    Tensile Strength,
    psi
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    0000-160
    1/16"0.038"0.018"Fully Threaded70,000ASME B18.11, ASME B18.6.31000000000000000
    3/32"0.038"0.018"Fully Threaded70,000ASME B18.11, ASME B18.6.3100000000000000
    1/8"0.038"0.018"Fully Threaded70,000ASME B18.11, ASME B18.6.3100000000000000
    5/32"0.038"0.018"Fully Threaded70,000ASME B18.11, ASME B18.6.3100000000000000
     
    000-120
    3/32"0.056"0.031"Fully Threaded70,000ASME B18.11, ASME B18.6.31000000000000000
    1/8"0.056"0.031"Fully Threaded70,000ASME B18.11, ASME B18.6.31000000000000000
    3/16"0.056"0.031"Fully Threaded70,000ASME B18.11, ASME B18.6.310000000000000
    1/4"0.056"0.031"Fully Threaded70,000ASME B18.11, ASME B18.6.310000000000000
     
    00-90
    1/8"0.082"0.047"Fully Threaded70,000ASME B18.6.310000000000000
    3/16"0.082"0.047"Fully Threaded70,000ASME B18.6.310000000000000
    1/4"0.082"0.047"Fully Threaded70,000ASME B18.6.310000000000000
     
    00-96
    1/8"0.082"0.047"Fully Threaded70,000ASME B18.6.310000000000000
    3/16"0.082"0.047"Fully Threaded70,000ASME B18.6.310000000000000
    1/4"0.082"0.047"Fully Threaded70,000ASME B18.6.310000000000000
     
    0-80
    1/8"0.096"0.055"Fully Threaded70,000ASME B18.6.310000000000000000
    3/16"0.096"0.055"Fully Threaded70,000ASME B18.6.310000000000000000
    1/4"0.096"0.055"Fully Threaded70,000ASME B18.6.310000000000000000
    5/16"0.096"0.055"Fully Threaded70,000ASME B18.6.310000000000000000
    3/8"0.096"0.055"Fully Threaded70,000ASME B18.6.310000000000000000
    1/2"0.096"0.055"Fully Threaded70,000ASME B18.6.3500000000000000
    5/8"0.096"0.055"Fully Threaded70,000ASME B18.6.3500000000000000
    3/4"0.096"0.055"Fully Threaded70,000ASME B18.6.35000000000000000
    1"0.096"0.055"Fully Threaded70,000ASME B18.6.35000000000000000
     
    1-72
    1/8"0.118"0.066"Fully Threaded70,000ASME B18.6.310000000000000000
    3/16"0.118"0.066"Fully Threaded70,000ASME B18.6.310000000000000000
    1/4"0.118"0.066"Fully Threaded70,000ASME B18.6.3500000000000000
    3/8"0.118"0.066"Fully Threaded70,000ASME B18.6.3500000000000000
    1/2"0.118"0.066"Fully Threaded70,000ASME B18.6.3500000000000000
    5/8"0.118"0.066"Fully Threaded70,000ASME B18.6.35000000000000000
    3/4"0.118"0.066"Fully Threaded70,000ASME B18.6.35000000000000000
    1"0.118"0.066"Fully Threaded70,000ASME B18.6.3250000000000000
     
    2-56
    1/8"0.14"0.083"Fully Threaded70,000ASME B18.6.310000000000000000
    3/16"0.14"0.083"Fully Threaded70,000ASME B18.6.31000000000000000
    1/4"0.14"0.083"Fully Threaded70,000ASME B18.6.31000000000000000
    5/16"0.14"0.083"Fully Threaded70,000ASME B18.6.31000000000000000
    3/8"0.14"0.083"Fully Threaded70,000ASME B18.6.31000000000000000
    7/16"0.14"0.083"Fully Threaded70,000ASME B18.6.31000000000000000
    1/2"0.14"0.083"Fully Threaded70,000ASME B18.6.31000000000000000
    5/8"0.14"0.083"Fully Threaded70,000ASME B18.6.31000000000000000
    3/4"0.14"0.083"Fully Threaded70,000ASME B18.6.31000000000000000
    7/8"0.14"0.083"Fully Threaded70,000ASME B18.6.31000000000000000
    1"0.14"0.083"Fully Threaded70,000ASME B18.6.31000000000000000
     
    2-64
    1/2"0.14"0.083"Fully Threaded70,000ASME B18.6.35000000000000000
     
    3-48
    1/8"0.161"0.095"Fully Threaded70,000ASME B18.6.310000000000000000
    3/16"0.161"0.095"Fully Threaded70,000ASME B18.6.310000000000000000
    1/4"0.161"0.095"Fully Threaded70,000ASME B18.6.31000000000000000
    5/16"0.161"0.095"Fully Threaded70,000ASME B18.6.31000000000000000
    3/8"0.161"0.095"Fully Threaded70,000ASME B18.6.31000000000000000
    1/2"0.161"0.095"Fully Threaded70,000ASME B18.6.310000000000000000
    5/8"0.161"0.095"Fully Threaded70,000ASME B18.6.310000000000000000
    3/4"0.161"0.095"Fully Threaded70,000ASME B18.6.3500000000000000
    1"0.161"0.095"Fully Threaded70,000ASME B18.6.35000000000000000
     
    4-40
    1/8"0.183"0.107"Fully Threaded70,000ASME B18.6.310000000000000000
    3/16"0.183"0.107"Fully Threaded70,000ASME B18.6.31000000000000000
    1/4"0.183"0.107"Fully Threaded70,000ASME B18.6.31000000000000000
    5/16"0.183"0.107"Fully Threaded70,000ASME B18.6.31000000000000000
    3/8"0.183"0.107"Fully Threaded70,000ASME B18.6.31000000000000000
    7/16"0.183"0.107"Fully Threaded70,000ASME B18.6.31000000000000000
    1/2"0.183"0.107"Fully Threaded70,000ASME B18.6.31000000000000000
    5/8"0.183"0.107"Fully Threaded70,000ASME B18.6.31000000000000000
    3/4"0.183"0.107"Fully Threaded70,000ASME B18.6.31000000000000000
    1"0.183"0.107"Fully Threaded70,000ASME B18.6.310000000000000000
    1 1/4"0.183"0.107"Fully Threaded70,000ASME B18.6.310000000000000000
    1 1/2"0.183"0.107"Fully Threaded70,000ASME B18.6.310000000000000000
     
    4-48
    1/4"0.183"0.107"Fully Threaded70,000ASME B18.6.3500000000000000
    3/8"0.183"0.107"Fully Threaded70,000ASME B18.6.3500000000000000
    1/2"0.183"0.107"Fully Threaded70,000ASME B18.6.35000000000000000
    3/4"0.183"0.107"Fully Threaded70,000ASME B18.6.35000000000000000
    1"0.183"0.107"Fully Threaded70,000ASME B18.6.3250000000000000
     
    5-40
    3/16"0.205"0.12"Fully Threaded70,000ASME B18.6.310000000000000000
    1/4"0.205"0.12"Fully Threaded70,000ASME B18.6.31000000000000000
    5/16"0.205"0.12"Fully Threaded70,000ASME B18.6.31000000000000000
    3/8"0.205"0.12"Fully Threaded70,000ASME B18.6.31000000000000000
    1/2"0.205"0.12"Fully Threaded70,000ASME B18.6.310000000000000000
    3/4"0.205"0.12"Fully Threaded70,000ASME B18.6.310000000000000000
    1"0.205"0.12"Fully Threaded70,000ASME B18.6.310000000000000000
     
    6-32
    3/16"0.226"0.132"Fully Threaded70,000ASME B18.6.31000000000000000
    1/4"0.226"0.132"Fully Threaded70,000ASME B18.6.31000000000000000
    5/16"0.226"0.132"Fully Threaded70,000ASME B18.6.31000000000000000
    3/8"0.226"0.132"Fully Threaded70,000ASME B18.6.31000000000000000
    1/2"0.226"0.132"Fully Threaded70,000ASME B18.6.31000000000000000
    5/8"0.226"0.132"Fully Threaded70,000ASME B18.6.31000000000000000
    3/4"0.226"0.132"Fully Threaded70,000ASME B18.6.310000000000000000
    7/8"0.226"0.132"Fully Threaded70,000ASME B18.6.310000000000000000
    1"0.226"0.132"Fully Threaded70,000ASME B18.6.310000000000000000
    1 1/4"0.226"0.132"Fully Threaded70,000ASME B18.6.310000000000000000
    1 1/2"0.226"0.132"Fully Threaded70,000ASME B18.6.310000000000000000
    2"0.226"0.132"Fully Threaded70,000ASME B18.6.35000000000000000
     
    8-32
    3/16"0.27"0.156"Fully Threaded70,000ASME B18.6.310000000000000000
    1/4"0.27"0.156"Fully Threaded70,000ASME B18.6.310000000000000000
    5/16"0.27"0.156"Fully Threaded70,000ASME B18.6.310000000000000000
    3/8"0.27"0.156"Fully Threaded70,000ASME B18.6.310000000000000000
    1/2"0.27"0.156"Fully Threaded70,000ASME B18.6.310000000000000000
    5/8"0.27"0.156"Fully Threaded70,000ASME B18.6.310000000000000000
    3/4"0.27"0.156"Fully Threaded70,000ASME B18.6.310000000000000000
    7/8"0.27"0.156"Fully Threaded70,000ASME B18.6.310000000000000000
    1"0.27"0.156"Fully Threaded70,000ASME B18.6.310000000000000000
    1 1/4"0.27"0.156"Fully Threaded70,000ASME B18.6.3500000000000000
    1 1/2"0.27"0.156"Fully Threaded70,000ASME B18.6.35000000000000000
    1 3/4"0.27"0.156"Fully Threaded70,000ASME B18.6.35000000000000000
    2"0.27"0.156"Fully Threaded70,000ASME B18.6.35000000000000000
    2 1/2"0.27"0.156"Partially Threaded70,000ASME B18.6.32500000000000000
     
    10-24
    5/16"0.313"0.18"Fully Threaded70,000ASME B18.6.310000000000000000
    3/8"0.313"0.18"Fully Threaded70,000ASME B18.6.310000000000000000
    1/2"0.313"0.18"Fully Threaded70,000ASME B18.6.310000000000000000
    5/8"0.313"0.18"Fully Threaded70,000ASME B18.6.310000000000000000
    3/4"0.313"0.18"Fully Threaded70,000ASME B18.6.35000000000000000
    1"0.313"0.18"Fully Threaded70,000ASME B18.6.35000000000000000
    1 1/4"0.313"0.18"Fully Threaded70,000ASME B18.6.35000000000000000
    1 1/2"0.313"0.18"Fully Threaded70,000ASME B18.6.35000000000000000
    2"0.313"0.18"Fully Threaded70,000ASME B18.6.32500000000000000
    3"0.313"0.18"Partially Threaded70,000ASME B18.6.32500000000000000
     
    10-32
    1/4"0.313"0.18"Fully Threaded70,000ASME B18.6.310000000000000000
    5/16"0.313"0.18"Fully Threaded70,000ASME B18.6.310000000000000000
    3/8"0.313"0.18"Fully Threaded70,000ASME B18.6.310000000000000000
    7/16"0.313"0.18"Fully Threaded70,000ASME B18.6.310000000000000000
    1/2"0.313"0.18"Fully Threaded70,000ASME B18.6.310000000000000000
    5/8"0.313"0.18"Fully Threaded70,000ASME B18.6.310000000000000000
    3/4"0.313"0.18"Fully Threaded70,000ASME B18.6.35000000000000000
    7/8"0.313"0.18"Fully Threaded70,000ASME B18.6.35000000000000000
    1"0.313"0.18"Fully Threaded70,000ASME B18.6.35000000000000000
    1 1/4"0.313"0.18"Fully Threaded70,000ASME B18.6.35000000000000000
    1 1/2"0.313"0.18"Fully Threaded70,000ASME B18.6.35000000000000000
    1 3/4"0.313"0.18"Fully Threaded70,000ASME B18.6.35000000000000000
    2"0.313"0.18"Fully Threaded70,000ASME B18.6.32500000000000000
    2 1/4"0.313"0.18"Partially Threaded70,000ASME B18.6.32500000000000000
    2 1/2"0.313"0.18"Partially Threaded70,000ASME B18.6.32500000000000000
    3"0.313"0.18"Partially Threaded70,000ASME B18.6.32500000000000000
     
    12-24
    1/2"0.357"0.205"Fully Threaded70,000ASME B18.6.35000000000000000
    5/8"0.357"0.205"Fully Threaded70,000ASME B18.6.35000000000000000
    3/4"0.357"0.205"Fully Threaded70,000ASME B18.6.35000000000000000
    1"0.357"0.205"Fully Threaded70,000ASME B18.6.35000000000000000
     
    1/4"-20
    3/8"0.414"0.237"Fully Threaded70,000ASME B18.6.35000000000000000
    1/2"0.414"0.237"Fully Threaded70,000ASME B18.6.35000000000000000
    5/8"0.414"0.237"Fully Threaded70,000ASME B18.6.35000000000000000
    3/4"0.414"0.237"Fully Threaded70,000ASME B18.6.3250000000000000
    1"0.414"0.237"Fully Threaded70,000ASME B18.6.32500000000000000
    1 1/4"0.414"0.237"Fully Threaded70,000ASME B18.6.32500000000000000
    1 1/2"0.414"0.237"Fully Threaded70,000ASME B18.6.32500000000000000
    2"0.414"0.237"Fully Threaded70,000ASME B18.6.32500000000000000
     
    1/4"-28
    1/2"0.414"0.237"Fully Threaded70,000ASME B18.6.3250000000000000
    5/8"0.414"0.237"Fully Threaded70,000ASME B18.6.3250000000000000
    3/4"0.414"0.237"Fully Threaded70,000ASME B18.6.32500000000000000
    1"0.414"0.237"Fully Threaded70,000ASME B18.6.35000000000000000
     
    5/16"-18
    1/2"0.518"0.295"Fully Threaded70,000ASME B18.6.32500000000000000
    3/4"0.518"0.295"Fully Threaded70,000ASME B18.6.3100000000000000
    1"0.518"0.295"Fully Threaded70,000ASME B18.6.3100000000000000
    1 1/2"0.518"0.295"Fully Threaded70,000ASME B18.6.3100000000000000
    1 3/4"0.518"0.295"Fully Threaded70,000ASME B18.6.31000000000000000
    2"0.518"0.295"Fully Threaded70,000ASME B18.6.31000000000000000
     
    3/8"-16
    1/2"0.622"0.355"Fully Threaded70,000ASME B18.6.31000000000000000
    1"0.622"0.355"Fully Threaded70,000ASME B18.6.31000000000000000
    2"0.622"0.355"Fully Threaded70,000ASME B18.6.3500000000000000
     
    Highly Corrosion-Resistant 316 Stainless Steel
     
    4-40
    3/16"0.183"0.107"Fully Threaded100,000ASME B18.6.31000000000000000
    1/4"0.183"0.107"Fully Threaded100,000ASME B18.6.31000000000000000
    3/8"0.183"0.107"Fully Threaded100,000ASME B18.6.31000000000000000
    1/2"0.183"0.107"Fully Threaded100,000ASME B18.6.31000000000000000
    3/4"0.183"0.107"Fully Threaded100,000ASME B18.6.31000000000000000
     
    6-32
    1/4"0.226"0.132"Fully Threaded100,000ASME B18.6.310000000000000000
    3/8"0.226"0.132"Fully Threaded100,000ASME B18.6.31000000000000000
    1/2"0.226"0.132"Fully Threaded100,000ASME B18.6.31000000000000000
    3/4"0.226"0.132"Fully Threaded100,000ASME B18.6.310000000000000000
    1"0.226"0.132"Fully Threaded100,000ASME B18.6.310000000000000000
     
    8-32
    1/4"0.27"0.156"Fully Threaded100,000ASME B18.6.3500000000000000
    3/8"0.27"0.156"Fully Threaded100,000ASME B18.6.310000000000000000
    1/2"0.27"0.156"Fully Threaded100,000ASME B18.6.310000000000000000
    3/4"0.27"0.156"Fully Threaded100,000ASME B18.6.310000000000000000
    1"0.27"0.156"Fully Threaded100,000ASME B18.6.3500000000000000
     
    10-32
    1/4"0.313"0.18"Fully Threaded100,000ASME B18.6.35000000000000000
    3/8"0.313"0.18"Fully Threaded100,000ASME B18.6.3500000000000000
    1/2"0.313"0.18"Fully Threaded100,000ASME B18.6.35000000000000000
    3/4"0.313"0.18"Fully Threaded100,000ASME B18.6.35000000000000000
    1"0.313"0.18"Fully Threaded100,000ASME B18.6.35000000000000000
     
    1/4"-20
    3/8"0.414"0.237"Fully Threaded100,000ASME B18.6.3250000000000000
    1/2"0.414"0.237"Fully Threaded100,000ASME B18.6.3250000000000000
    3/4"0.414"0.237"Fully Threaded100,000ASME B18.6.32500000000000000
    1"0.414"0.237"Fully Threaded100,000ASME B18.6.32500000000000000
    1 1/2"0.414"0.237"Fully Threaded100,000ASME B18.6.32500000000000000
     

    Stainless Steel Fillister Head Phillips Screws

    Image of Product. Front orientation. Rounded Head Screws. Stainless Steel Fillister Head Phillips Screws.
    The most corrosion-resistant fillister head Phillips screws we offer. They have a tall head with a deep drive, so drivers are less likely to slip out. They also have a narrow diameter and fit into tight spaces, such as holes deep inside machinery. The Phillips drive easily aligns with drivers and withstands more torque than slotted drives, but drivers may slip when you apply too much force.
    Length is measured from under the head.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel can.
    Head
    Lg.
    Dia.
    Ht.
    Threading
    Tensile Strength,
    psi
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    2-56
    1/8"0.14"0.083"Fully Threaded80,000ASME B18.6.310000000000000000
    3/16"0.14"0.083"Fully Threaded80,000ASME B18.6.31000000000000000
    1/4"0.14"0.083"Fully Threaded80,000ASME B18.6.31000000000000000
    5/16"0.14"0.083"Fully Threaded80,000ASME B18.6.31000000000000000
    3/8"0.14"0.083"Fully Threaded80,000ASME B18.6.31000000000000000
     
    4-40
    3/16"0.183"0.107"Fully Threaded80,000ASME B18.6.31000000000000000
    1/4"0.183"0.107"Fully Threaded80,000ASME B18.6.31000000000000000
    5/16"0.183"0.107"Fully Threaded80,000ASME B18.6.31000000000000000
    3/8"0.183"0.107"Fully Threaded80,000ASME B18.6.31000000000000000
    1/2"0.183"0.107"Fully Threaded80,000ASME B18.6.31000000000000000
    3/4"0.183"0.107"Fully Threaded80,000ASME B18.6.31000000000000000
     
    6-32
    1/4"0.226"0.132"Fully Threaded80,000ASME B18.6.31000000000000000
    5/16"0.226"0.132"Fully Threaded80,000ASME B18.6.31000000000000000
    3/8"0.226"0.132"Fully Threaded80,000ASME B18.6.31000000000000000
    1/2"0.226"0.132"Fully Threaded80,000ASME B18.6.31000000000000000
    3/4"0.226"0.132"Fully Threaded80,000ASME B18.6.31000000000000000
    1"0.226"0.132"Fully Threaded80,000ASME B18.6.310000000000000000
     
    8-32
    1/4"0.27"0.156"Fully Threaded80,000ASME B18.6.310000000000000000
    5/16"0.27"0.156"Fully Threaded80,000ASME B18.6.310000000000000000
    3/8"0.27"0.156"Fully Threaded80,000ASME B18.6.310000000000000000
    1/2"0.27"0.156"Fully Threaded80,000ASME B18.6.310000000000000000
    5/8"0.27"0.156"Fully Threaded80,000ASME B18.6.3500000000000000
    3/4"0.27"0.156"Fully Threaded80,000ASME B18.6.3500000000000000
    1"0.27"0.156"Fully Threaded80,000ASME B18.6.3500000000000000
     
    10-24
    3/8"0.313"0.18"Fully Threaded80,000ASME B18.6.3500000000000000
    1/2"0.313"0.18"Fully Threaded80,000ASME B18.6.3500000000000000
    3/4"0.313"0.18"Fully Threaded80,000ASME B18.6.35000000000000000
     
    10-32
    1/4"0.313"0.18"Fully Threaded80,000ASME B18.6.310000000000000000
    3/8"0.313"0.18"Fully Threaded80,000ASME B18.6.3500000000000000
    1/2"0.313"0.18"Fully Threaded80,000ASME B18.6.3500000000000000
    3/4"0.313"0.18"Fully Threaded80,000ASME B18.6.35000000000000000
    1"0.313"0.18"Fully Threaded80,000ASME B18.6.35000000000000000
     
    1/4"-20
    1/2"0.414"0.237"Fully Threaded80,000ASME B18.6.3250000000000000
    3/4"0.414"0.237"Fully Threaded80,000ASME B18.6.3250000000000000
    1"0.414"0.237"Fully Threaded80,000ASME B18.6.32500000000000000
    1 1/2"0.414"0.237"Fully Threaded80,000ASME B18.6.32500000000000000
     

    Steel Fillister Head Slotted Screws

    Image of Product. Front orientation. Rounded Head Screws. Steel Fillister Head Slotted Screws.
    Reduce the chance of slotted drivers slipping with a tall head that has a deep drive. These screws also have a narrow diameter to fit into tight spaces, such as holes deep inside machinery.
    Length is measured from under the head.
    Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.
    Head
    Lg.
    Dia.
    Ht.
    Threading
    Tensile Strength,
    psi
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
     
    4-40
    3/16"0.183"0.107"Fully Threaded60,000ASME B18.6.3100000000000000000
    1/4"0.183"0.107"Fully ThreadedNot RatedASME B18.6.31000000000000000
    3/8"0.183"0.107"Fully ThreadedNot RatedASME B18.6.31000000000000000
    1/2"0.183"0.107"Fully Threaded60,000ASME B18.6.31000000000000000
    3/4"0.183"0.107"Fully Threaded60,000ASME B18.6.35000000000000000
     
    6-32
    1/4"0.226"0.132"Fully ThreadedNot RatedASME B18.6.31000000000000000
    5/16"0.226"0.132"Fully Threaded60,000ASME B18.6.310000000000000000
    3/8"0.226"0.132"Fully ThreadedNot RatedASME B18.6.31000000000000000
    1/2"0.226"0.132"Fully Threaded60,000ASME B18.6.31000000000000000
    5/8"0.226"0.132"Fully Threaded60,000ASME B18.6.310000000000000000
    3/4"0.226"0.132"Fully Threaded60,000ASME B18.6.31000000000000000
    1"0.226"0.132"Fully Threaded60,000ASME B18.6.310000000000000000
     
    8-32
    1/4"0.27"0.156"Fully Threaded60,000ASME B18.6.31000000000000000
    5/16"0.27"0.156"Fully Threaded60,000ASME B18.6.31000000000000000
    3/8"0.27"0.156"Fully Threaded60,000ASME B18.6.31000000000000000
    1/2"0.27"0.156"Fully Threaded60,000ASME B18.6.31000000000000000
    5/8"0.27"0.156"Fully Threaded60,000ASME B18.6.31000000000000000
    3/4"0.27"0.156"Fully Threaded60,000ASME B18.6.31000000000000000
    1"0.27"0.156"Fully Threaded60,000ASME B18.6.31000000000000000
    1 1/4"0.27"0.156"Fully Threaded60,000ASME B18.6.31000000000000000
    1 1/2"0.27"0.156"Fully Threaded60,000ASME B18.6.310000000000000000
     
    10-24
    3/8"0.313"0.18"Fully Threaded60,000ASME B18.6.31000000000000000
    1/2"0.313"0.18"Fully Threaded60,000ASME B18.6.31000000000000000
    3/4"0.313"0.18"Fully Threaded60,000ASME B18.6.310000000000000000
    1"0.313"0.18"Fully Threaded60,000ASME B18.6.31000000000000000
    1 1/2"0.313"0.18"Fully Threaded60,000ASME B18.6.310000000000000000
    2"0.313"0.18"Fully Threaded60,000ASME B18.6.3500000000000000
     
    10-32
    1/4"0.313"0.18"Fully Threaded60,000ASME B18.6.31000000000000000
    3/8"0.313"0.18"Fully Threaded60,000ASME B18.6.31000000000000000
    1/2"0.313"0.18"Fully Threaded60,000ASME B18.6.31000000000000000
    5/8"0.313"0.18"Fully Threaded60,000ASME B18.6.31000000000000000
    3/4"0.313"0.18"Fully Threaded60,000ASME B18.6.31000000000000000
    1"0.313"0.18"Fully Threaded60,000ASME B18.6.310000000000000000
    1 1/4"0.313"0.18"Fully Threaded60,000ASME B18.6.310000000000000000
    1 1/2"0.313"0.18"Fully Threaded60,000ASME B18.6.310000000000000000
    1 3/4"0.313"0.18"Fully Threaded60,000ASME B18.6.35000000000000000
    2"0.313"0.18"Fully Threaded60,000ASME B18.6.3500000000000000
     
    12-24
    1/2"0.357"0.205"Fully Threaded60,000ASME B18.6.31000000000000000
    3/4"0.357"0.205"Fully Threaded60,000ASME B18.6.310000000000000000
    1"0.357"0.205"Fully Threaded60,000ASME B18.6.310000000000000000
    1 1/4"0.357"0.205"Fully Threaded60,000ASME B18.6.3500000000000000
    1 1/2"0.357"0.205"Fully Threaded60,000ASME B18.6.32500000000000000
    2"0.357"0.205"Fully Threaded60,000ASME B18.6.32500000000000000
     
    1/4"-20
    1/2"0.414"0.237"Fully Threaded60,000ASME B18.6.310000000000000000
    5/8"0.414"0.237"Fully Threaded60,000ASME B18.6.310000000000000000
    3/4"0.414"0.237"Fully Threaded60,000ASME B18.6.310000000000000000
    1"0.414"0.237"Fully Threaded60,000ASME B18.6.310000000000000000
    1 1/4"0.414"0.237"Fully Threaded60,000ASME B18.6.35000000000000000
    1 1/2"0.414"0.237"Fully Threaded60,000ASME B18.6.35000000000000000
    2"0.414"0.237"Fully Threaded60,000ASME B18.6.32500000000000000
    3"0.414"0.237"Fully Threaded60,000ASME B18.6.31000000000000000
     
    5/16"-18
    3/4"0.518"0.295"Fully Threaded60,000ASME B18.6.35000000000000000
    1"0.518"0.295"Fully Threaded60,000ASME B18.6.3250000000000000
     

    Wire-Locking Stainless Steel Fillister Head Slotted Screws

    Image of ProductInUse. Front orientation. Contains Annotated, Border. Rounded Head Screws. Wire-Locking Stainless Steel Fillister Head Slotted Screws.
    Image of Product. Front orientation. Rounded Head Screws. Wire-Locking Stainless Steel Fillister Head Slotted Screws.
    The best vibration resistance of our rounded head screws. Secure a wire through the hole in the head of these screws to lock them in place. Unlike screws with threadlocker or lock washers, they handle more vibration and movement, but they're more difficult to install. Made of stainless steel, they won't rust or corrode when exposed to moisture and chemicals. With a deeper drive than others, fillister heads reduce the likelihood that basic slotted drivers slip as you hand-tighten them.
    Length is measured from under the head.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel can.
    Military Specification—These screws are manufactured and tested to meet strict U.S. military standards for material and construction.
    Stainless Steel Wire—Thread this stainless steel wire through screws to lock them together.
    Screws
    Stainless
    Steel Wire
    Head
    Lg.
    Dia.
    Ht.
    Hole
    Dia.
    Threading
    Tensile Strength,
    psi
    Specs. Met
    Mil. Spec.
    Pkg.
    Qty.
    Pkg.
    Each
    18-8 Stainless Steel
     
    2-56
    1/4"0.14"0.083"0.031"Fully Threaded80,000Fed. Spec. QQ-P-35, NASM35275AN500AD2-4, MS35275-203100000000000000000000000000000
    5/16"0.14"0.083"0.031"Fully Threaded80,000Fed. Spec. QQ-P-35, NASM35275AN500AD2-5, MS35275-2041000000000000000000000000000
    3/8"0.14"0.083"0.031"Fully Threaded80,000Fed. Spec. QQ-P-35, NASM35275AN500AD2-6, MS35275-2051000000000000000000000000000
    1/2"0.14"0.083"0.031"Fully Threaded80,000Fed. Spec. QQ-P-35, NASM35275AN500AD2-8, MS35275-207100000000000000000000000000
     
    4-40
    3/16"0.183"0.107"0.037"Fully Threaded80,000Fed. Spec. QQ-P-35, NASM35275AN500AD4-3, MS35275-21250000000000000000000000000
    1/4"0.183"0.107"0.037"Fully Threaded80,000Fed. Spec. QQ-P-35, NASM35275AN500AD4-4, MS35275-213100000000000000000000000000
    5/16"0.183"0.107"0.037"Fully Threaded80,000Fed. Spec. QQ-P-35, NASM35275AN500AD4-5, MS35275-214100000000000000000000000000
    3/8"0.183"0.107"0.037"Fully Threaded80,000Fed. Spec. QQ-P-35, NASM35275AN500AD4-6, MS35275-215100000000000000000000000000
    1/2"0.183"0.107"0.037"Fully Threaded80,000Fed. Spec. QQ-P-35, NASM35275AN500AD4-8, MS35275-217100000000000000000000000000
    3/4"0.183"0.107"0.035"Fully Threaded80,000Fed. Spec. QQ-P-35
    MS35275-219500000000000000000000000000
     
    6-32
    3/16"0.226"0.132"0.046"Fully Threaded80,000Fed. Spec. QQ-P-35, NASM35275AN500AD6-3, MS35275-225500000000000000000000000000
    1/4"0.226"0.132"0.046"Fully Threaded80,000Fed. Spec. QQ-P-35, NASM35275AN500AD6-4, MS35275-226100000000000000000000000000
    5/16"0.226"0.132"0.046"Fully Threaded80,000Fed. Spec. QQ-P-35, NASM35275AN500AD6-5, MS35275-227100000000000000000000000000
    3/8"0.226"0.132"0.046"Fully Threaded80,000Fed. Spec. QQ-P-35, NASM35275AN500AD6-6, MS35275-2281000000000000000000000000000
    1/2"0.226"0.132"0.046"Fully Threaded80,000Fed. Spec. QQ-P-35, NASM35275AN500AD6-8, MS35275-2301000000000000000000000000000
    3/4"0.226"0.132"0.046"Fully Threaded80,000Fed. Spec. QQ-P-35, NASM35275AN500AD6-12, MS35275-23250000000000000000000000000
    1"0.226"0.132"0.035"Fully Threaded80,000Fed. Spec. QQ-P-35
    MS35275-234500000000000000000000000000
     
    8-32
    1/4"0.27"0.156"0.047"Fully Threaded80,000Fed. Spec. QQ-P-35
    MS35275-241500000000000000000000000000
    3/8"0.27"0.156"0.046"Fully Threaded80,000Fed. Spec. QQ-P-35, NASM35275AN500AD8-6, MS35275-24350000000000000000000000000
    1/2"0.27"0.156"0.046"Fully Threaded80,000Fed. Spec. QQ-P-35, NASM35275AN500AD8-8, MS35275-24550000000000000000000000000
    3/4"0.27"0.156"0.046"Fully Threaded80,000Fed. Spec. QQ-P-35, NASM35275AN500AD8-12, MS35275-24750000000000000000000000000
    1"0.27"0.156"0.047"Fully Threaded80,000Fed. Spec. QQ-P-35
    MS35275-249500000000000000000000000000
     
    10-32
    1/4"0.313"0.18"0.047"Fully Threaded80,000Fed. Spec. QQ-P-35
    MS35276-259500000000000000000000000000
    3/8"0.313"0.18"0.046"Fully Threaded80,000Fed. Spec. QQ-P-35, NASM35275, NASM35276AN501AD10-6, MS35276-26150000000000000000000000000
    1/2"0.313"0.18"0.046"Fully Threaded80,000Fed. Spec. QQ-P-35, NASM35276AN501AD10-8, MS35276-26350000000000000000000000000
    3/4"0.313"0.18"0.046"Fully Threaded80,000Fed. Spec. QQ-P-35, NASM35276AN501AD10-12, MS35276-26550000000000000000000000000
    1"0.313"0.18"0.047"Fully Threaded80,000Fed. Spec. QQ-P-35
    MS35276-267500000000000000000000000000
     
    1/4"-20
    3/8"0.414"0.237"0.047"Fully Threaded80,000Fed. Spec. QQ-P-35
    MS35275-277500000000000000000000000000
    1/2"0.414"0.237"0.047"Fully Threaded80,000Fed. Spec. QQ-P-35
    MS35275-279500000000000000000000000000
    3/4"0.414"0.237"0.047"Fully Threaded80,000Fed. Spec. QQ-P-35
    MS35275-281500000000000000000000000000
    1"0.414"0.237"0.047"Fully Threaded80,000Fed. Spec. QQ-P-35
    MS35275-283500000000000000000000000000
     

    Brass Fillister Head Slotted Screws

    Image of Product. Front orientation. Rounded Head Screws. Brass Fillister Head Slotted Screws.
    These fillister head slotted screws have a shiny look and won't rust in damp environments. Made of brass, they're also conductive and nonmagnetic, making them useful for electrical applications. With a deeper drive than others, fillister heads reduce the likelihood that basic slotted drivers slip as you hand-tighten them. Since they also have a narrow diameter, they fit into tight spaces, such as holes tucked away inside machinery.
    Length is measured from under the head.
    Head
    Lg.
    Dia.
    Ht.
    Threading
    Tensile Strength,
    psi
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Brass
     
    2-56
    1/4"0.14"0.083"Fully Threaded50,000ASME B18.6.310000000000000000
    3/8"0.14"0.083"Fully Threaded50,000ASME B18.6.31000000000000000
    1/2"0.14"0.083"Fully Threaded50,000ASME B18.6.31000000000000000
     
    4-40
    1/4"0.183"0.107"Fully Threaded50,000ASME B18.6.31000000000000000
    3/8"0.183"0.107"Fully Threaded50,000ASME B18.6.31000000000000000
    1/2"0.183"0.107"Fully Threaded50,000ASME B18.6.31000000000000000
    3/4"0.183"0.107"Fully Threaded50,000ASME B18.6.310000000000000000
     
    6-32
    1/4"0.226"0.132"Fully Threaded50,000ASME B18.6.31000000000000000
    3/8"0.226"0.132"Fully Threaded50,000ASME B18.6.310000000000000000
    1/2"0.226"0.132"Fully Threaded50,000ASME B18.6.310000000000000000
    5/8"0.226"0.132"Fully Threaded50,000ASME B18.6.310000000000000000
    3/4"0.226"0.132"Fully Threaded50,000ASME B18.6.310000000000000000
    1"0.226"0.132"Fully Threaded50,000ASME B18.6.3500000000000000
     
    8-32
    1/4"0.27"0.156"Fully Threaded50,000ASME B18.6.310000000000000000
    3/8"0.27"0.156"Fully Threaded50,000ASME B18.6.310000000000000000
    1/2"0.27"0.156"Fully Threaded50,000ASME B18.6.310000000000000000
    5/8"0.27"0.156"Fully Threaded50,000ASME B18.6.3500000000000000
    3/4"0.27"0.156"Fully Threaded50,000ASME B18.6.35000000000000000
    1"0.27"0.156"Fully Threaded50,000ASME B18.6.35000000000000000
     
    10-24
    3/8"0.313"0.18"Fully Threaded50,000ASME B18.6.35000000000000000
    1/2"0.313"0.18"Fully Threaded50,000ASME B18.6.35000000000000000
    5/8"0.313"0.18"Fully Threaded50,000ASME B18.6.35000000000000000
    3/4"0.313"0.18"Fully Threaded50,000ASME B18.6.35000000000000000
    1"0.313"0.18"Fully Threaded50,000ASME B18.6.3250000000000000
     
    10-32
    1/4"0.313"0.18"Fully Threaded50,000ASME B18.6.310000000000000000
    3/8"0.313"0.18"Fully Threaded50,000ASME B18.6.35000000000000000
    1/2"0.313"0.18"Fully Threaded50,000ASME B18.6.35000000000000000
    5/8"0.313"0.18"Fully Threaded50,000ASME B18.6.35000000000000000
    3/4"0.313"0.18"Fully Threaded50,000ASME B18.6.35000000000000000
    1"0.313"0.18"Fully Threaded50,000ASME B18.6.3250000000000000
     
    1/4"-20
    3/8"0.414"0.237"Fully Threaded50,000ASME B18.6.3250000000000000
    1/2"0.414"0.237"Fully Threaded50,000ASME B18.6.32500000000000000
    5/8"0.414"0.237"Fully Threaded50,000ASME B18.6.32500000000000000
    3/4"0.414"0.237"Fully Threaded50,000ASME B18.6.32500000000000000
    1"0.414"0.237"Fully Threaded50,000ASME B18.6.32500000000000000
     

    Plastic Fillister Head Slotted Screws

    Image of Product. Front orientation. Rounded Head Screws. Plastic Fillister Head Slotted Screws.
    Combine the lightweight and nonconductive properties of plastic with the tall, narrow head of these fillister screws. Since they have a deeper drive than other screws, slotted drivers are less likely to slip. These screws often secure panels to electronics deep inside machinery and in other applications where screws are hard to reach.
    Length is measured from under the head.
    Nylon—The most common plastic rounded head screws, these are good for general purpose fastening. Slippery and abrasion resistant, they thread in smoothly and stand up to daily wear and tear. Nylon will swell and weaken when exposed to moisture, so these screws are best for dry environments.
    Head
    Lg.
    Threading
    Dia.
    Ht.
    Tensile
    Strength
    Temp. Range,
    ° F
    Choose a Color
    Pkg.
    Qty.
    Pkg.
    Nylon
     
    0-80
    1/8"Fully Threaded0.096"0.055"Not Rated-40 to 185
    Black
    ,
    Off-White
    100000000000000000
    3/16"Fully Threaded0.096"0.055"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1/4"Fully Threaded0.096"0.055"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
     
    2-56
    1/8"Fully Threaded0.14"0.083"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    3/16"Fully Threaded0.14"0.083"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1/4"Fully Threaded0.14"0.083"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    5/16"Fully Threaded0.14"0.083"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    3/8"Fully Threaded0.14"0.083"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1/2"Fully Threaded0.14"0.083"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    3/4"Fully Threaded0.14"0.083"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1"Fully Threaded0.14"0.083"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
     
    4-40
    3/16"Fully Threaded0.183"0.107"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1/4"Fully Threaded0.183"0.107"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    9/32"Fully Threaded0.183"0.107"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    5/16"Fully Threaded0.183"0.107"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    3/8"Fully Threaded0.183"0.107"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1/2"Fully Threaded0.183"0.107"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    5/8"Fully Threaded0.183"0.107"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    3/4"Fully Threaded0.183"0.107"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1"Fully Threaded0.183"0.107"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
     
    6-32
    3/16"Fully Threaded0.226"0.132"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1/4"Fully Threaded0.226"0.132"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    5/16"Fully Threaded0.226"0.132"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    3/8"Fully Threaded0.226"0.132"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1/2"Fully Threaded0.226"0.132"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    5/8"Fully Threaded0.226"0.132"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    3/4"Fully Threaded0.226"0.132"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1"Fully Threaded0.226"0.132"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
     
    8-32
    1/4"Fully Threaded0.27"0.156"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    3/8"Fully Threaded0.27"0.156"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1/2"Fully Threaded0.27"0.156"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    5/8"Fully Threaded0.27"0.156"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    3/4"Fully Threaded0.27"0.156"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1"Fully Threaded0.27"0.156"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1 1/2"Fully Threaded0.27"0.156"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
     
    10-24
    1/4"Fully Threaded0.313"0.18"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1/2"Fully Threaded0.313"0.18"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    3/4"Fully Threaded0.313"0.18"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1"Fully Threaded0.313"0.18"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1 1/2"Fully Threaded0.313"0.18"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
     
    10-32
    1/8"Fully Threaded0.313"0.18"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1/4"Fully Threaded0.313"0.18"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    3/8"Fully Threaded0.313"0.18"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1/2"Fully Threaded0.313"0.18"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    5/8"Fully Threaded0.313"0.18"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    3/4"Fully Threaded0.313"0.18"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1"Fully Threaded0.313"0.18"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1 1/2"Fully Threaded0.313"0.18"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    2"Fully Threaded0.313"0.18"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
     
    1/4"-20
    1/4"Fully Threaded0.414"0.237"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    3/8"Fully Threaded0.414"0.237"Not Rated-40 to 185
    Black
    ,
    Off-White
    1000000000000000
    1/2"Fully Threaded0.414"0.237"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    5/8"Fully Threaded0.414"0.237"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    3/4"Fully Threaded0.414"0.237"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1"Fully Threaded0.414"0.237"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    1 1/2"Fully Threaded0.414"0.237"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
    2"Fully Threaded0.414"0.237"Not Rated-40 to 185
    Black
    ,
    Off-White
    10000000000000000
     
    back to top