Seal Installation Tools | McMaster-Carr

Filter by

Seal ID

Tip Style

Minimum Opening Required

Handle Style

REACH

Ring OD

DFARS Specialty Metals

Exempt

RoHS

Compliant

Compliant with Exemptions

Flexibility

Material

Grip Style

Shaft Flexibility

Overall Length

Export Control Classification Number (ECCN)

EAR99

Sold As

Individual

Set

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Handle Material

Corkscrew Diameter

Number of Pieces

Overall Height

Performance

Tip Angle

Tip Type

Length

Sleeving Type

101 Products

Rod Seal Installation Tools

Install flexible seals, wipers, and O-rings. These tools are not for use with rigid materials, such as PTFE and nylon.

For Seal ID	Min. Opening Req.	Each
1" to 1 1/2"	1"	000000
1 1/2" to 2"	1 1/2"	00000
2" to 3"	2"	00000

Changeable-Tip Packing Seal Puller Sets

Sets include an assortment of handles and tips for pulling material out of tight spots. Replace tips when they become worn or to use a different style. Also known as packing extractors, they are often used to extract packing material from pump and valve seals.

Corkscrew tips twist into material for a firm hold.

Wood screw tips are used to drill into and remove hardened packing when corkscrew tips are unable to get a secure hold on your material.

Machine screw tips thread into tapped holes. They're good for removing stuck or seized metallic components that can't be gripped easily.

Brush tips have stiff bristles that clean debris out of cavities after material has been pulled out with a screw tip.

Flexible Shaft—Flexible-shaft pullers bend to access material in tight spots.

Pry Bar—Sets with pry bars give more leverage for pulling and packing.

	Includes	Tip Mounting Thread Size	Grip Style	Handle Material	Container Type		Each
Flexible Shaft



	6	Three Steel Flexible Shafts with T-Handles (8", 11 1/12", and 15" Lg.) Three Steel Corkscrew Tips (1/4", 5/16", and 3/8" Dia.)	8-32, 1/4"-20	Plain	Steel	Cardboard Box	00000000	000000


	8	Two Steel Flexible Shafts with T-Handles (11 3/4" Lg.) Four Steel Corkscrew Tips (1/4" Dia.) Wrench Pry Bar	8-32	Plain	Steel	Plastic Box	00000000	000000
	14	Three 10" Lg. Steel 45° Angle Picks with Loop Handles (One each of 1/8", 3/16", and 5/16" Dia.) Four Steel Flexible Shafts with T-Handles (Two each of 7" and 11" Lg.) Six Steel Corkscrew Tips (Three each of 1/4" and 5/16" Dia.) Wrench	8-32, 1/4"-20	Plain	Steel	Plastic Box	0000000	000000
	14	Four Steel Flexible Shafts with T-Handles (Two each of 11 1/2" and 14 3/4" Lg.) Eight Steel Corkscrew Tips (Four each of 5/16" and 3/8" Dia.) Wrench Pry Bar	1/4"-20	Plain	Steel	Plastic Box	00000000	000000
	22	Three 10" Lg. Steel 45° Angle Picks with Loop Handles (One each of 1/8", 3/16", and 5/16" Dia.) Six Steel Flexible Shafts with T-Handles (Two each of 7", 11", and 14" Lg.) Nine Steel Corkscrew Tips (Three each of 1/4", 5/16", and 3/8" Dia.) Three Steel Wood Screw Tips (One each of 3/16", 1/4", and 5/16" Thread Size) Wrench	8-32, 1/4"-20	Plain	Steel	Plastic Box	0000000	000000


	Flexible Shaft, Rigid Shaft



			49	Two 6" Lg. Steel 20° Angle Picks with Loop Handles Three 10" Lg. Steel 45° Angle Picks with Loop Handles (One each of 1/8", 3/16", and 5/16" Dia.) Six Steel Rigid Shafts with Loop Handles (Two each of 6", 10", and 14" Lg.) Six Steel Flexible Shafts with T-Handles (Two each of 7", 11", and 14" Lg.) 15 Steel Corkscrew Tips (Five each of 1/4", 5/16", and 3/8" Dia.) Three Steel Wood Screw Tips (One each of 3/16", 1/4", and 5/16" Thread Size) Six Steel Machine Screw Tips (One each of 8-32, 10-32, 10-24, 1/4"-20, 1/4"-28, and 5/16"-18 Thread Size) Four Steel Brush Tips (One each of 7/32", 5/16", 5/8", and 11/16" Dia.) Two Brush Tip Adapters Knife Wrench	8-32, 1/4"-20	Plain	Steel	Plastic Box	0000000	000000


			Rigid Shaft



					6	Three Steel Rigid Shafts with Loop Handles (6", 10", and 14" Lg.) Three Steel Corkscrew Tips (1/4", 5/16", and 3/8" Dia.)	8-32, 1/4"-20	Plain	Steel	Cardboard Box	00000000	00000

Packing Seal Puller Tips


Machine Screw	Wood Screw	Corkscrew Tip

Brush Tip	Hook Tip

Corkscrew Tip—Corkscrew tips twist into material for a firm hold.

Wood Screw Tip—Wood screw tips are used to drill into and remove hardened packing when corkscrew tips are unable to get a secure hold on your material.

Machine Screw Tip—Machine screw tips thread into tapped holes. They're good for removing stuck or seized metallic components that can't be gripped easily.

Brush Tip—Brush tips have stiff bristles that clean debris out of cavities after material has been pulled out with a screw tip.

	Corkscrew Dia.	Screw Size	Thread Size	Brush Dia.	Tip Dia.	Material	Pkg. Qty.		Pkg.
Corkscrew Tip



	8-32	1/4"	—	—	—	—	Steel	1	0000000	00000


	1/4"-20	5/16"	—	—	—	—	Steel	1	0000000	0000
	1/4"-20	3/8"	—	—	—	—	Steel	1	0000000	00000


	Wood Screw Tip



			8-32	—	3/16"	—	—	—	Steel	1	0000000	0000


			1/4"-20	—	1/4"	—	—	—	Steel	1	0000000	0000
			1/4"-20	—	5/16"	—	—	—	Steel	1	0000000	0000


			Machine Screw Tip



					8-32	—	—	8-32, 10-24, 10-32	—	—	Steel	3	0000000	0000


					1/4"-20	—	—	1/4"-20, 1/4"-28, 5/16"-18	—	—	Steel	3	0000000	0000


					Brush Tip



							8-32	—	—	—	7/32", 5/16"	—	Steel	2	0000000	00000


							1/4"-20	—	—	—	5/8", 11/16"	—	Steel	2	0000000	00000


							Hook Tip



									8-32	—	—	—	—	0.083"	Steel	1	0000000	0000


									1/4"-20	—	—	—	—	0.108"	Steel	1	0000000	00000

Easy-Adjust Piston Ring Compressors

These compressors use either a spring clutch or two screws to make incremental sizing adjustments for a secure fit. Use them to ensure smooth insertion of your piston into a cylinder.

For Ring OD	Overall Ht.	Each
1 1/2" to 3"	2"	000000
2 1/8" to 5"	3 1/2"	00000
3 1/2" to 7"	3 1/2"	00000
3 1/2" to 7"	7"	00000
7" to 10"	7"	00000

Seal Pullers


Fixed Tip	Fixed Tip Hammer Grip	Adjustable Tip

Shaped for removing the seals around bearings, insert the tip of these tools behind the seal and pull. The curved head provides leverage to remove stuck and stubborn material.

Hammer Grip—Pullers with a hammer grip give you a spot to strike the puller when removing or positioning a seal.

		Style
	Overall Lg.	Handle	Grip	Tip Type	Material	Handle Material	Features		Each
Hook Tip



		12 1/2"	Straight	Cushion	Fixed	Steel	Plastic	—	0000000	000000


		12 1/2"	Straight	Plain	Fixed	Steel	Steel	Hammer Grip	00000000	00000
		13 1/8"	Straight	Cushion	Adjustable	Steel	Plastic	—	00000000	00000

Piston Ring Installation Tools

Reduce the risk of distorting and breaking piston rings during installation and removal.

For Ring OD		Each
1 1/8" to 2 1/4"	0000000	000000
2 1/8" to 3 7/8"	0000000	00000
4 1/4" to 6 1/4"	0000000	00000

Packing Seal Installation Tools

T-Handle

Offset Handle

Also known as packing irons, these tools allow you to install packing into hard-to-reach areas. The blunt tip prevents them from accidentally cutting or damaging the packing material.

T-Handle—Tools with a T-handle are flexible, so they can bend for access to material in tight spots.

		Style
	Overall Lg.	Handle	Grip	Tip Type	Material	Handle Material		Each
Blunt Tip



		11"	T-Handle	Plain	Fixed	Steel	Steel	0000000	000000


		14"	Offset	Plain	Fixed	Steel	Steel	0000000	00000

Quick-Release Piston Ring Compressors

Push the lever and this compressor instantly releases for easy removal. Use it to ensure smooth insertion of your piston into a cylinder.

For Ring OD	Overall Ht.		Each
2 1/8" to 5"	1 1/2"	000000	000000

Wire Sleeving Installation Tools

For Corrugated and Wraparound Sleeving

For Spiral Wrap

Sleeving


For Corrugated and Wraparound Sleeving	For Spiral Wrap Sleeving

Save time installing sleeving around wire, cable, and hose. These tools are especially helpful for installing long lengths of sleeving. Safer than installing sleeves by hand, they also keep you from touching its sharp edges.

For Corrugated and Wraparound Sleeving—Tools for corrugated and wrap-around sleeving use a zipper-like motion to close the sleeving around your components. Route your wire, cable, or hose through the tool, twist the tool to secure the item you're wrapping, then wedge the grooved insert on the tool into the sleeving. As you drag the tool along the sleeving, it will close around your components.

For Spiral Wrap Sleeving—Tools for spiral wrap sleeving open the spirals for you, saving you the effort of pulling apart spirals, which can be difficult. Rotate the tool around your components until the sleeving is completely installed.

	Material		Each
For Corrugated and Wraparound Sleeving



	1/4" to 7/16"	Plastic	0000000	00000


	1/2" to 5/8"	Plastic	0000000	0000
	3/4" to 7/8"	Plastic	0000000	0000
	1" to 1 1/4"	Plastic	0000000	00000
	1 1/4" to 3"	Plastic	0000000	00000


	For Spiral Wrap Sleeving



			1/2" to 2"	Metal	0000000	00000


			2 1/2" to 5 1/2"	Metal	0000000	000000

Backer Rod Insertion Tools


Insertion Tool with Threaded Handle (Backer Rod Not Included)	Insertion Tool with Backer Rod Holder (Backer Rod Not Included)

Quickly set foam backer rods (not included) in caulk joints at a consistent depth without puncturing them.

Threaded Handle—Tools with a threaded handle are small enough to be kept in your tool kit, making them good for quick jobs with short runs of backer rod. To make them more ergonomic, add a pole handle so you can stand while installing a backer rod on the ground.

Backer Rod Holder—Tools with a backer rod holder are ideal for inserting long runs of backer rod quickly. They keep your backer rod organized and positioned, so you can press it into place with just one pass.

Includes	For Max. Joint Wd.	For Rod Dia.	For Screw Size	Material	Features		Each
1/8" Dia. Insertion Wheel, 1/4" Dia. Insertion Wheel, 3/8" Dia. Insertion Wheel, 1/2" Dia. Insertion Wheel	1/2"	1/8" to 1/2"	3/4"	Plastic	Threaded Handle	0000000	000000
1/8" Dia. Insertion Wheel, 3/8" Dia. Insertion Wheel	1/2"	1/8" to 5/8"	—	Steel	Backer Rod Holder	0000000	00000000

Installation Tools for Pull-Through Bore Sealing Plugs

Expand the sleeve on pull-through bore sealing plugs to permanently seal a flow path in a manifold or other channel. These tools work with the pull of a trigger, making them a good choice for high-volume assemblies. While most plugs get hammered into place, which risks damage to your equipment, these installation tools simply reach into holes to expand the plug.

					Air Connection			Body
For Thread Size	Stroke Lg.	Operating Pressure, psi	Pulling Force, lbf	Wt., lb.	Pipe Size	Thread Type	Gender	Wd.	Dia.	Head Lg.	Overall Ht.		Each



	4-40, 6-32, 8-32, 10-24, 10-32, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, M2, M3, M4, M5, M6, M8, M10	0.04" to 0.28"	75 to 100	5,000	4	1/4	NPT	Female	1"	4 5/16"	10 1/4"	10 1/2"	0000000	000000000

Mandrel and Nosepiece Sets

Select the mandrel and nosepiece set that matches the thread size of the plug you're installing.

For Thread Size	Max. Thread Lg.	Includes	Each
4-40	45/64"	Mandrel, Anvil, Hex Driver, Lock Nut, Sleeve	0000000
6-32	49/64"	Mandrel, Anvil, Hex Driver, Lock Nut, Sleeve	000000
M2 × 0.4 mm	6 mm	Mandrel, Anvil, Hex Driver, Lock Nut, Sleeve	000000
M3 × 0.5 mm	11.8 mm	Mandrel, Anvil, Hex Driver, Lock Nut, Sleeve	000000
M4 × 0.7 mm	14.8 mm	Mandrel, Anvil, Hex Driver, Lock Nut, Sleeve	000000
M5 × 0.8 mm	15.6 mm	Mandrel, Anvil, Hex Driver, Lock Nut, Sleeve	000000
M6 × 1 mm	27.4 mm	Mandrel, Anvil, Hex Driver, Lock Nut, Sleeve	000000

Low-Friction Piston Ring Compressors

Also known as a wrinkle-band compressor, this tool has fewer points of contact than other compressors for less friction. Use it to ensure smooth insertion of your piston into a cylinder. This compressor has a cam lock that holds the size once you set it.

For Ring OD	Overall Ht.		Each
3" to 5"	1 1/2"	0000000	000000

Installation Tools for Push-In Bore Sealing Plugs

Strike these tools with a hammer or use them with an arbor press to set push-in bore sealing plugs.

	Dia.	Lg.		Each
Steel



	3/32"	3/8"	5"	00000000	000000


	1/8", 3 mm	3/8"	5"	0000000	00000
	5/32", 4 mm	3/8"	5"	00000000	00000
	3/16"	3/8"	5"	00000000	00000
	7/32", 5 mm	3/8"	5"	00000000	00000
	1/4", 6 mm	3/8"	5"	00000000	00000
	9/32", 7 mm	3/8"	5"	00000000	00000
	5/16", 8 mm	3/8"	5"	00000000	00000
	11/32", 9 mm	5/8"	5"	00000000	00000
	3/8"	5/8"	5"	00000000	00000
	13/32", 10 mm	5/8"	5"	00000000	00000


	7/16"	5/8"	5"	00000000	00000
	15/32", 12 mm	5/8"	5"	00000000	00000
	5/8", 16 mm	3/4"	5"	0000000	000000
	11/16", 18 mm	3/4"	5"	0000000	000000
	25/32", 20 mm	1"	5"	0000000	000000
	7/8", 22 mm	1"	5"	0000000	000000

Packing Seal Puller Sets


Flexible Shaft 3 Pieces	Flexible Shaft 8 Pieces	Rigid Shaft 4 Pieces

Rigid Shaft 6 Pieces	Rigid Shaft 8 Pieces	Rigid Shaft 10 Pieces

Use the assorted tools in these sets to pull material out of tight spots. The corkscrew tips twist into material for a firm hold while the handle provides the necessary leverage for pulling. Also known as packing extractors, they are often used to remove packing material from pump and valve seals.

Flexible Shaft—Flexible-shaft pullers bend to access material in tight spots.

	Includes	Grip Style	Handle Material	Specs. Met		Each
Flexible Shaft



	3	7 1/2" Lg. Steel Puller with 1/4" Dia. Corkscrew Tip and T-Handle 10 3/4" Lg. Steel Puller with 5/16" Dia. Corkscrew Tip and T-Handle 14 1/2" Lg. Steel Puller with 3/8" Dia. Corkscrew Tip and T-Handle	Plain	Steel	Fed. Spec. GGG-E-950	0000000	000000


	8	7" Lg. Steel Puller with 3/16" Dia. Corkscrew Tip and T-Handle 7 1/2" Lg. Steel Puller with 1/4" Dia. Corkscrew Tip and T-Handle 10 3/4" Lg. Steel Puller with 5/16" Dia. Corkscrew Tip and T-Handle 14 1/2" Lg. Steel Puller with 3/8" Dia. Corkscrew Tip and T-Handle 18" Lg. Steel Puller with 1/2" Dia. Corkscrew Tip and T-Handle 22" Lg. Steel Puller with 3/8" Dia. Corkscrew Tip and T-Handle 22" Lg. Steel Puller with 5/8" Dia. Corkscrew Tip and T-Handle 30" Lg. Steel Puller with 3/8" Dia. Corkscrew Tip and T-Handle	Plain	Steel	Fed. Spec. GGG-E-950	0000000	000000


	Rigid Shaft



			4	6" Lg. Steel Puller with Corkscrew Tip and Loop Handle 10" Lg. Steel Puller with Corkscrew Tip and Loop Handle 14" Lg. Steel Puller with Corkscrew Tip and Loop Handle 12" Lg. Steel Pick with 90° Angle × 45° Angle Tips	Plain	Steel	—	0000000	000000


			6	6" Lg. Steel Puller with Corkscrew Tip and Loop Handle 10" Lg. Steel Puller with Corkscrew Tip and Loop Handle 14" Lg. Steel Puller with Corkscrew Tip and Loop Handle 18" Lg. Steel Puller with Corkscrew Tip and Loop Handle 8" Lg. Steel Pick with 90° Angle Tip and Loop Handle 12" Lg. Steel Pick with 90° Angle × 45° Angle Tips	Plain	Steel	—	0000000	000000
			8	6" Lg. Steel Puller with Corkscrew Tip and Loop Handle 10" Lg. Steel Puller with Corkscrew Tip and Loop Handle 14" Lg. Steel Puller with Corkscrew Tip and Loop Handle 18" Lg. Steel Puller with Corkscrew Tip and Loop Handle 20" Lg. Steel Puller with Corkscrew Tip and Loop Handle 8" Lg. Steel Pick with 90° Angle Tip and Loop Handle 12" Lg. Steel Pick with 90° Angle × 45° Angle Tips 14" Lg. Steel Packing Installation Tool with Blunt Tip and Offset Handle	Plain	Steel	—	0000000	000000
			10	6" Lg. Steel Puller with Corkscrew Tip and Loop Handle 10" Lg. Steel Puller with Corkscrew Tip and Loop Handle 14" Lg. Steel Puller with Corkscrew Tip and Loop Handle 18" Lg. Steel Puller with Corkscrew Tip and Loop Handle 20" Lg. Steel Puller with Corkscrew Tip and Loop Handle 8" Lg. Steel Pick with 90° Angle Tip and Loop Handle 10" Lg. Steel Pick with 90° Angle Tip and Loop Handle 10" Lg. Steel Pick with 90° Angle × 45° Angle Tips 12" Lg. Steel Pick with 90° Angle × 45° Angle Tips 14" Lg. Steel Packing Installation Tool with Blunt Tip and Offset Handle	Plain	Steel	—	0000000	000000

Installation Tools for Push-In Bore Sealing Plugs, Sanitary RTD Probe Transmitters with Digital Display for Liquids and Gas Bore Sealing Plug Installation Tools

Strike these tools with a hammer or use them with an arbor press to set push-in bore sealing plugs.

	Dia.	Lg.		Each
Steel



	9/16", 14 mm	3/4"	5"	0000000	0000000

Nonsparking Packing Seal Pullers

Made of beryllium copper with an aluminum-bronze handle, these pullers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. They also are nonmagnetic. The corkscrew tip twists into material to provide a firm hold while the handle provides the necessary leverage for pulling. Also known as packing extractors, they are often used to extract packing material from pump and valve seals.

Warning: Do not use these tools in direct contact with acetylene.

	Corkscrew Dia.	Tip Style	Grip Style	Material	Handle Material		Each
Rigid Shaft with T-Handle



	8"	1/8"	Corkscrew	Plain	Beryllium Copper	Aluminum Bronze	0000000	000000

Packing Seal Pullers

Pull material out of tight spots. Similar to removing a cork from a bottle, the tip twists into material for a firm hold while the handle provides the necessary leverage for pulling. Also known as packing extractors, they are often used to remove packing material from pump and valve seals.

Flexible Shaft—Flexible-shaft pullers bend to access material in tight spots.

	Corkscrew Dia.	Tip Style	Grip Style	Material	Handle Material	Specs. Met		Each
Rigid Shaft with Loop Handle



	6"	3/8"	Corkscrew	Plain	Steel	Steel	—	0000000	000000


	10"	1/2"	Corkscrew	Plain	Steel	Steel	—	0000000	00000
	14"	1/2"	Corkscrew	Plain	Steel	Steel	—	0000000	00000
	18"	5/8"	Corkscrew	Plain	Steel	Steel	—	0000000	00000
	20"	5/8"	Corkscrew	Plain	Steel	Steel	—	0000000	00000


	Flexible Shaft with T-Handle



			7"	3/16"	Corkscrew	Plain	Steel	Steel	Fed. Spec. GGG-E-950	0000000	00000


			7 1/2"	1/4"	Corkscrew	Plain	Steel	Steel	Fed. Spec. GGG-E-950	0000000	00000
			10 3/4"	5/16"	Corkscrew	Plain	Steel	Steel	Fed. Spec. GGG-E-950	0000000	00000
			14 1/2"	3/8"	Corkscrew	Plain	Steel	Steel	Fed. Spec. GGG-E-950	0000000	00000
			18"	1/2"	Corkscrew	Plain	Steel	Steel	Fed. Spec. GGG-E-950	0000000	00000
			22"	3/8"	Corkscrew	Plain	Steel	Steel	Fed. Spec. GGG-E-950	0000000	00000
			22"	5/8"	Corkscrew	Plain	Steel	Steel	Fed. Spec. GGG-E-950	0000000	00000
			30"	3/8"	Corkscrew	Plain	Steel	Steel	Fed. Spec. GGG-E-950	0000000	00000

Changeable-Tip Packing Seal Pullers


Rigid Shaft with Loop Handle	Flexible Shaft with T-Handle	Semi-Rigid Shaft with T-Handle

Replace tips when they become worn or to use a different style. The handle provides the necessary leverage for pulling. Also known as packing extractors, they are often used to extract packing material from pump and valve seals. The corkscrew tip twists into material to provide a firm hold.

Flexible Shaft—Flexible-shaft pullers bend to access material in tight spots.

Semi-Rigid Shaft—Semi-rigid-shaft pullers bend slightly for access to material in tight spots but still get a firm grip.

	Corkscrew Dia.	Tip Mounting Thread Size	Tip Style	Grip Style	Material	Handle Material		Each
Rigid Shaft with Loop Handle



	6"	1/4"	8-32	Corkscrew	Plain	Steel	Steel	0000000	000000


	10"	5/16"	1/4"-20	Corkscrew	Plain	Steel	Steel	0000000	00000
	14"	3/8"	1/4"-20	Corkscrew	Plain	Steel	Steel	0000000	00000


	Flexible Shaft with T-Handle



			7"	1/4"	8-32	Corkscrew	Plain	Steel	Steel	0000000	00000


			11"	5/16"	1/4"-20	Corkscrew	Plain	Steel	Steel	0000000	00000
			14"	3/8"	1/4"-20	Corkscrew	Plain	Steel	Steel	0000000	00000


			Semi-Rigid Shaft with T-Handle



					7"	1/4"	8-32	Corkscrew	Plain	Steel	Steel	0000000	00000


					11"	5/16"	1/4"-20	Corkscrew	Plain	Steel	Steel	0000000	00000
					14"	3/8"	1/4"-20	Corkscrew	Plain	Steel	Steel	0000000	00000

Packing Seal Puller Tips


Machine Screw	Wood Screw	Corkscrew Tip

Brush Tip	Hook Tip

Corkscrew Tip—Corkscrew tips twist into material for a firm hold.

Wood Screw Tip—Wood screw tips are used to drill into and remove hardened packing when corkscrew tips are unable to get a secure hold on your material.

Machine Screw Tip—Machine screw tips thread into tapped holes. They're good for removing stuck or seized metallic components that can't be gripped easily.

Brush Tip—Brush tips have stiff bristles that clean debris out of cavities after material has been pulled out with a screw tip.

	Corkscrew Dia.	Screw Size	Thread Size	Brush Dia.	Tip Dia.	Material	Pkg. Qty.		Pkg.
Corkscrew Tip



	8-32	1/4"	—	—	—	—	Steel	1	0000000	00000


	1/4"-20	5/16"	—	—	—	—	Steel	1	0000000	0000
	1/4"-20	3/8"	—	—	—	—	Steel	1	0000000	00000


	Wood Screw Tip



			8-32	—	3/16"	—	—	—	Steel	1	0000000	0000


			1/4"-20	—	1/4"	—	—	—	Steel	1	0000000	0000
			1/4"-20	—	5/16"	—	—	—	Steel	1	0000000	0000


			Machine Screw Tip



					8-32	—	—	8-32, 10-24, 10-32	—	—	Steel	3	0000000	0000


					1/4"-20	—	—	1/4"-20, 1/4"-28, 5/16"-18	—	—	Steel	3	0000000	0000


					Brush Tip



							8-32	—	—	—	7/32", 5/16"	—	Steel	2	0000000	00000


							1/4"-20	—	—	—	5/8", 11/16"	—	Steel	2	0000000	00000


							Hook Tip



									8-32	—	—	—	—	0.083"	Steel	1	0000000	0000


									1/4"-20	—	—	—	—	0.108"	Steel	1	0000000	00000