McMaster-Carr logo
    Filter by
    System of Measurement
    Flexibility
    Reaches Full Strength
    Maximum Gap Size Filled
    Mixing Required
    Hardness Rating
    Cure Type
    Certification
    Environment
    For Use Outdoors
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    20 Products

    Noncorrosive Silicone Rubber Sealants

    Image of Product. Front orientation. Sealants. Noncorrosive Silicone Rubber Sealants, Cartridge.

    Cartridge

    Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone rubber, sealants are RTV (room-temperature vulcanizing).
    Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
    Cannot Be Sold to California—Sealants that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
    Container
    Temp.,
    ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Elongation
    Joint Compression/Expansion
    Tolerance
    Tensile Strength,
    psi
    Hardness Rating
    Min.
    Max.
    For Joining
    Cannot Be
    Sold To
    Color (Clarity)
    Each
    Permatex Silicone Rubber
    8117312.9Cartridge3024350%Not Rated170Soft (Durometer 15A)-75450Asphalt
    Composite
    Glass
    Masonry
    Metal
    Plastic
    Rubber
    Wood
    Composite to Glass
    Metal to Composite
    Metal to Glass
    Metal to Plastic
    Metal to Rubber
    Plastic to Composite
    Plastic to Glass
    Plastic to Rubber
    Rubber to Composite
    Rubber to Glass    		CaliforniaBlack (Semi-Clear)7479A34000000
     

    Flexible Gasket Makers

    Make gaskets that accommodate movement. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and make it easy to form irregular-shaped gaskets.
    Permatex Gasket Makers
    Image of Product. Front orientation. Gasket Makers. Flexible Gasket Makers.
    Model Number 82180—Permatex 82180 is RTV (room temperature vulcanizing).
    Container
    Temperature,
    ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Max. Gap
    Size Filled
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Min.
    Max.
    Color
    For Use On
    Each
    821802.7Tube0.25"12024-65400BlackAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Composite7568A38000000

    Flexible Oil-Resistant Gasket Makers

    Create gaskets that can flex to accommodate movement and won’t degrade from oil.
    Permatex Gasket Makers
    Image of Product. Front orientation. Gasket Makers. Flexible Oil-Resistant Gasket Makers.
    Model Number 81724—Permatex 81724 is RTV (room temperature vulcanizing).
    Container
    Temperature,
    ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Max. Gap
    Size Filled
    Begins to
    Harden, hr.
    Reaches Full
    Strength, hr.
    Min.
    Max.
    Color
    For Use On
    Each
    817243Tube0.25"224-65400BlueAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene, Polycarbonate, Polyurethane Rubber, ABS, PVC, CPVC, PETG, PVDF, Polyimide, EPDM, Vinyl Plastic, SBR, Glass, Wood7600A41000000

    Fast-Hardening Gasket Makers in Nozzle-Top Cans

    The thick consistency of these gasket makers creates a seal right away even before they harden. This means you can safely return your application to normal operation in just one minute. Press the nozzle to dispense a uniform bead. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and make it easy to form irregular-shaped gaskets.
    Permatex Gasket Makers
    Image of Product. Front orientation. Gasket Makers. Fast-Hardening Gasket Makers in Nozzle-Top Cans.
    Model Number 25224—Permatex 25224 is RTV (room temperature vulcanizing).
    Model Number 85224—Permatex 85224 is RTV (room temperature vulcanizing).
    Container
    Temperature,
    ° F
    Mfr. Model
    No.
    Net Wt.,
    oz.
    Type
    Max. Gap
    Size Filled
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Min.
    Max.
    Color
    For Use On
    Each
    252247Nozzle-Top Can0.25"524-75450BlackAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene, Polycarbonate, Polyurethane Rubber, ABS, PVC, CPVC, PETG, PVDF, Polyimide, EPDM, Vinyl Plastic, SBR, Glass, Wood66175A62000000
    852247 1/2Nozzle-Top Can0.25"524-75450BlackAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene, Polycarbonate, Polyurethane Rubber, ABS, PVC, CPVC, PETG, PVDF, Polyimide, EPDM, Vinyl Plastic, SBR, Glass, Wood66175A4100000

    Fast-Hardening Gasket Makers

    Create a seal to get your machine back up and running in just two hours. These gasket makers have a thick consistency that creates a seal right away, even before they harden. Use them in place of rubber, cork, and other traditional gasket materials for a form-in-place seal. They also make it easy to form irregular-shaped gaskets.
    Permatex Gasket Makers
    Image of Product. Front orientation. Gasket Makers. Fast-Hardening Gasket Makers.
    Model Number 25228—Permatex 25228 is RTV (room temperature vulcanizing).
    Container
    Temperature,
    ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Max. Gap
    Size Filled
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Min.
    Max.
    Color
    For Use On
    Each
    252283Tube0.250"52-65400BlackAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene, Polycarbonate, Polyurethane Rubber, ABS, PVC, CPVC, PETG, PVDF, Polyimide, EPDM, Vinyl Plastic, SBR, Glass, Wood4474N11000000

    High-Temperature Gasket Makers in Nozzle-Top Cans

    Create gaskets that withstand temperatures up to 600° F. Press the nozzle to dispense a uniform bead. Gasket maker is used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and they make it easy to form irregular-shaped gaskets.
    Permatex Gasket Makers
    Image of Product. Front orientation. Gasket Makers. High-Temperature Gasket Makers in Nozzle-Top Cans.
    Model Number 85915—Permatex 85915 is RTV (room temperature vulcanizing).
    Container
    Temperature,
    ° F
    Mfr. Model
    No.
    Net Wt.,
    oz.
    Type
    Max. Gap
    Size Filled
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Min.
    Max.
    Color
    Certification
    Mil. Spec.
    For Use On
    Each
    859157.25Nozzle-Top Can0.25"6024-65600RedMil. Spec.MIL-A-46106Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene, Polycarbonate, Polyurethane Rubber, ABS, PVC, CPVC, PETG, PVDF, Polyimide, EPDM, Vinyl Plastic, SBR, Glass, Wood7583A13000000

    High-Temperature Gasket Makers in Cartridges

    Create gaskets that withstand temperatures up to 600° F. Use cartridges with a standard caulk gun for quick and easy dispensing. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and make it easy to form irregular-shaped gaskets.
    Permatex Gasket Makers
    Image of Product. Front orientation. Gasket Makers. High-Temperature Gasket Makers in Cartridges.
    Model Number 81409—Permatex 81409 is RTV (room temperature vulcanizing).
    Container
    Temperature,
    ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Max. Gap
    Size Filled
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Min.
    Max.
    Color
    Certification
    Mil. Spec.
    For Use On
    Each
    8140911Cartridge0.25"6024-65600RedMil. Spec.MIL-A-46106Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene, Polycarbonate, Polyurethane Rubber, ABS, PVC, CPVC, PETG, PVDF, Polyimide, EPDM, Vinyl Plastic, SBR, Glass, Wood7583A15000000

    Flexible High-Temperature Gasket Makers

    This gasket maker combines the ability to withstand temperatures up to 600° F with the flexibility to accommodate movement. It is used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and make it easy to form irregular-shaped gaskets.
    Permatex Gasket Makers
    Image of Product. Front orientation. Gasket Makers. Flexible High-Temperature Gasket Makers.
    Model Number 81878—Permatex 81878 is RTV (room temperature vulcanizing).
    Container
    Temperature,
    ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Max. Gap
    Size Filled
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Min.
    Max.
    Color
    For Use On
    Each
    818783Tube0.25"6024-65600CopperAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene, Polycarbonate, Polyurethane Rubber, ABS, PVC, CPVC, PETG, PVDF, Polyimide, EPDM, Vinyl Plastic, SBR, Glass, Wood76715A71000000

    Rigid Oil-Resistant Gasket Makers

    Form dense, rigid gaskets that won’t degrade in the presence of oil. Because they’re rigid, they stand up to vibration and high-torque applications. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and make it easy to form irregular-shaped gaskets.
    Permatex Gasket Makers
    Image of Product. Front orientation. Gasket Makers. Rigid Oil-Resistant Gasket Makers.
    Model Number 82194—Permatex 82194 is RTV (room temperature vulcanizing).
    Container
    Temperature,
    ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Max. Gap
    Size Filled
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Min.
    Max.
    Color
    For Use On
    Each
    821943.5Tube0.25"3024-65450GrayAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene, Polycarbonate, ABS, PVC, CPVC, PVDF, Polyimide, Vinyl Plastic, Glass, Wood75115A57000000

    Surface Fillers for Metal

    Image of Product. Front orientation. Surface Fillers. Surface Fillers for Metal, Epoxy, Syringe.

    Epoxy

    Syringe

    Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.
    Container
    Temp.
    Range, ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Consistency
    Mixing
    Req.
    Mix
    Ratio
    Max.
    Thk.
    For Use
    Outdoors
    Min.
    Max.
    Color
    Process After Hardening
    For Use On
    Each
    Permatex Black Plastic Welder
    841450.8Syringe1024Thick LiquidYes1:11/8"Yes-60250BlackMachine, Drill, Sand, Saw, TapAluminum, Stainless Steel, Cast Iron74575A5600000
     

    Gel Threadlockers

    Image of Product. Front orientation. Threadlockers. Gel Threadlockers, Stick.
    Image of Product. Front orientation. Threadlockers. Gel Threadlockers, Tube.

    Stick

    Tube

    With a slower flow than liquids, gel threadlockers cling to fasteners for more controlled application and less mess. They begin to harden when you thread coated surfaces together, blocking exposure to air.
    Primer (sold separately) cleans the surface and decreases the time to reach full strength. It is recommended when working with aluminum, stainless steel, and titanium; black-oxide finishes; and cadmium and zinc coatings.
    Medium Locking Strength—Strong enough for most applications, these threadlockers hold firmly until you break their bond with a combination or ratchet wrench.
    High Locking Strength—Keep fasteners firmly in place in motors, pumps, and other applications subjected to heavy shock and vibration. Breaking the bond of these threadlockers requires a propane torch, heat gun, or induction heater. As a result, they shouldn't be used in setups that you disassemble often.
    Container
    Mfr. Model
    No.
    Net Wt.,
    oz.
    Type
    Begins to
    Harden, min.
    Color
    Breakaway Torque,
    in·lbf
    Temp. Range,
    ° F
    Consistency
    Viscosity,
    cP
    Reaches Full
    Strength, hr.
    Each
    Medium Locking Strength
     
    Permatex
    240100.35Stick15Blue115-65 to 300Gel200,000247445A12000000
     
    High Locking Strength
     
    Permatex
    278351.23Tube15Red175-65 to 300Gel240,000247445A1400000
     

    Flexible Oil-Resistant Gasket Makers in Cartridges

    These gasket makers combine oil resistance and the flexibility to accommodate movement. Use cartridge with a standard caulk gun for quick and easy dispensing. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and make it easy to form irregular-shaped gaskets.
    Permatex Gasket Makers
    Image of Product. Front orientation. Gasket Makers. Flexible Oil-Resistant Gasket Makers in Cartridges.
    Model Number 81725—Permatex 81725 is RTV (room temperature vulcanizing).
    Container
    Temperature,
    ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Max. Gap
    Size Filled
    Begins to
    Harden, hr.
    Reaches Full
    Strength, hr.
    Min.
    Max.
    Color
    For Use On
    Each
    8172513Cartridge0.25"224-65400BlueAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene, Polycarbonate, Polyurethane Rubber, ABS, PVC, CPVC, PETG, PVDF, Polyimide, EPDM, Vinyl Plastic, SBR, Glass, Wood7600A42000000

    Flexible Gasket Makers in Nozzle-Top Cans

    Make gaskets that accommodate movement. Press the nozzle to dispense a uniform bead. Gasket maker is used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and makes it easy to form irregular-shaped gaskets.
    Permatex Gasket Makers
    Image of Product. Front orientation. Gasket Makers. Flexible Gasket Makers in Nozzle-Top Cans.
    Model Number 85080—Permatex 85080 gasket maker is RTV (room temperature vulcanizing).
    Container
    Temperature,
    ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Max. Gap
    Size Filled
    Begins to
    Harden, hr.
    Reaches Full
    Strength, hr.
    Min.
    Max.
    Color
    For Use On
    Each
    850809.5Nozzle-Top Can0.25"224-65400BlackAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium6641A52000000

    Anaerobic Gasket Makers

    Curing without exposure to air, these anaerobic gasket makers begin to harden when you press your coated surfaces together. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal. They make it easy to form irregular-shaped gaskets.
    Permatex Gasket Makers
    Image of Product. Front orientation. Gasket Makers. Anaerobic Gasket Makers.
    Container
    Temperature,
    ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Max. Gap
    Size Filled
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Cure
    Type
    Min.
    Max.
    Color
    For Use On
    Each
    518131.69Tube0.015"6024Anaerobic-65300RedAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium4476N11000000

    Fast-Hardening Gasket Makers in Cartridges

    Use cartridges with a standard caulk gun for quick and easy dispensing. These gasket makers have a thick consistency that creates a seal right away, even before they begin to harden, so you can use your machine again in just one minute. They are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal. They also make it easy to form irregular-shaped gaskets.
    Permatex Gasket Makers
    Image of Product. Front orientation. Gasket Makers. Fast-Hardening Gasket Makers in Cartridges.
    Model Number 33694—Permatex 33694 is RTV (room temperature vulcanizing).
    Container
    Temperature,
    ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Max. Gap
    Size Filled
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Min.
    Max.
    Color
    For Use On
    Each
    3369410.1Cartridge0.25"1524-60400BlackAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium7479A32000000

    Flexible Gasket Makers in Cartridges

    Make gaskets that accommodate movement. Use cartridges with a standard caulk gun for quick and easy dispensing. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and make it easy to form irregular-shaped gaskets.
    Permatex Gasket Makers
    Image of Product. Front orientation. Gasket Makers. Flexible Gasket Makers in Cartridges.
    Model Number 24105—Permatex 24105 is RTV (room temperature vulcanizing).
    Container
    Temperature,
    ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Max. Gap
    Size Filled
    Begins to
    Harden, hr.
    Reaches Full
    Strength, hr.
    Min.
    Max.
    Color
    For Use On
    Each
    2410513Cartridge0.25"224-65400BlackAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium7568A39000000

    Rigid Oil-Resistant Gasket Makers in Cartridges

    With a standard caulk gun, quickly and easily make dense, rigid gaskets that won’t degrade from oil. Since they're rigid, they stand up to vibration and high-torque applications. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal. They make it easy to create irregular-shaped gaskets.
    Permatex Gasket Makers
    Image of Product. Front orientation. Gasket Makers. Rigid Oil-Resistant Gasket Makers in Cartridges.
    Model Number 82195—Permatex 82195 is RTV (room temperature vulcanizing).
    Container
    Temperature,
    ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Max. Gap
    Size Filled
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Min.
    Max.
    Color
    For Use On
    Each
    8219513Cartridge0.25"3024-65450GrayAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene, Polycarbonate, ABS, PVC, CPVC, PVDF, Polyimide, Vinyl Plastic, Glass, Wood75115A61000000

    Anaerobic Gasket Makers in Cartridges

    Use cartridges with a standard caulk gun for quick and easy dispensing. These anaerobic gasket makers begin to harden when you press your coated surfaces together, curing without exposure to air. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal. They make it easy to form irregular-shaped gaskets.
    Permatex Gasket Makers
    Image of Product. Front orientation. Gasket Makers. Anaerobic Gasket Makers in Cartridges.
    Container
    Temperature,
    ° F
    Mfr. Model
    No.
    Size, fl.
    oz.
    Type
    Max. Gap
    Size Filled
    Begins to
    Harden, min.
    Reaches Full
    Strength, hr.
    Cure
    Type
    Min.
    Max.
    Color
    For Use On
    Each
    5184510.1Cartridge0.015"6024Anaerobic-65300RedAluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium4483N110000000
    back to top