These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Mix a small amount of water-based paint with this caulk to match the color of your surface.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.

The strongest submersible sealants we offer, these combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Apply these thread sealant sticks without a mess.

Apply this thread sealant stick without a mess.

Formulated to flow into small spaces, use these sealants between fine threads.

These sealants come in bottles, cans, and tubes so you can choose the quantity that covers your application.

Formulated for high lubricity, these sealants allow easy assembly of finely threaded hydraulic and compressed air system components. They're also free of fillers that could contaminate system media.

For use in refrigeration systems and applications exposed to strong chemicals, these sealants have excellent solvent resistance.

Use color to identify water, gas, and chemical connections.

This tape contains nickel to prevent seizing and galling associated with stainless steel threaded connections. It’s also good for use with other metals.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

This thermally conductive coating keeps electrical components cool by dissipating heat.

Clear enough to read through, this coating allows optimal light transmission for use with LEDs, solar cells, and fiber optics.

Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds.

Make castings and fill voids with these two-part pourable epoxies.

Stop leaks in metal tanks and equipment without draining the contents.

To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal.

These gasket makers come in a tube.

Push the plunger to precisely dispense small amounts.

These gasket makers come in a tube.

Dispense a uniform bead when you press the nozzle.

Dispense a uniform bead when you press the nozzle.

Dispense a uniform bead when you press the nozzle.

These gasket makers combine the ability to withstand temperatures up to 600° F with the flexibility to accommodate movement.

These gasket makers come in a can.

Use cartridges with a standard caulk gun for quick and easy dispensing.

These gasket makers combine oil resistance and the flexibility to accommodate movement.

Use cartridges with a standard caulk gun for quick and easy dispensing.

Use cartridges with a standard caulk gun for quick and easy dispensing.

These adhesives come in a can.

Form rigid seals on plumbing connections and duct.

Prevent threaded fasteners from loosening due to shock and vibration.

Withstand demanding, high-vibration applications such as motor and pump housings with these threadlockers.

These threadlockers develop usable strength within one hour. Because they harden quickly on most metals, they don't require a primer.

These threadlockers meet NSF/ANSI 61 for drinking water.

This thick paste withstands temperatures up to 650 °F.

These threadlockers hold securely but stay flexible, so fasteners can be adjusted, removed, or reused.

Apply these threadlockers on fasteners that are already installed—their thin consistency allows them to flow into small gaps.

These threadlockers withstand temperatures up to 450° F.

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

Fill gaps up to 0.01" to secure unthreaded cylindrical metal parts such as shafts, bearings, and press-fit assemblies.

Fill gaps up to 0.02" to secure worn unthreaded cylindrical metal parts such as shafts, bearings, and press-fit assemblies.