We will reply to your message within an hour.
More
Made from silicone, these sealants are RTV (room-temperature vulcanizing).
Resistant to mold and mildew, these sealants are well suited to high-humidity environments.
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.
Compliant with ASTM E-595, these sealants produce almost no volatile materials in a vacuum.
A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.
Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics.
Apply these sealants in cold temperatures, on wet surfaces, and even through running water.
Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.
Meeting requirements for semiconductor, biomedical, and electronics clean rooms, these sealants won’t contaminate air and surfaces.
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
Mix a small amount of water-based paint with this caulk to match the color of your surface.
Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.
Press this adhesive-backed plastic tape into place for an immediate light-duty seal.
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.
Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.
These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.
The strongest submersible sealants we offer, these combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.
The textured finish matches concrete surfaces.
These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Fix roof leaks in cold and wet conditions. These sealants can even be applied underwater.
Prepare joints and surfaces to ensure proper sealant adhesion.
Prevent the edges of tape, signs, and graphics from peeling by sealing out water and debris.
These sealants don't degrade in sunlight.
Repair equipment and vehicle windows with these sealants that are rated to withstand impact within three hours of application.
Form flexible water-resistant seals on metal, plastic, and rubber joints in heating, ventilation, air conditioning, and refrigeration applications.
Designed for use in truck beds, these durable coatings create a tough, textured finish that prevents objects from sliding. Made from polyurethane, they resist abrasion and won’t fade from exposure to UV light.
Designed for use on hoppers, chutes, and pumps, these coatings protect against impact and abrasion. Thicker than paint, they resist UV, moisture, and chemicals.
Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.
Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.
Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.
Use these coatings in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry.
Spray these coatings on glass to create a clear, scratch-resistant surface that repels oil and water. They’re also known as oleophobic and hydrophobic coatings.
Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.
Designed for use in areas with heavy vehicular traffic, these coatings are highly resistant to wear. They contain grit to provide traction to your surface.
This coating is formulated for use in sensitive applications such as manufacturing semiconductors.
Thinner than potting compounds, these rigid and wear-resistant coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards.
Clear enough to read through, this coating allows optimal light transmission for use with LEDs, solar cells, and fiber optics.
These coatings require an ultraviolet curing lamp to reach full strength.
This thermally conductive coating keeps electrical components cool by dissipating heat.
No mixing required—these potting compounds come ready to apply.
Clear enough to read through, this UV-resistant potting compound allows optimal light transmission for use with LEDs, solar cells, and fiber optics.
Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics.
The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.
Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds.
Made of rubber and iron oxide, these sheets can be cut with scissors to create custom-shaped nonmetallic, nonmagnetic surface that magnets will stick to.
Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.
These primers convert rust into a layer of protection that prevents new rust from forming. Use them to prepare your surface to extend the life of paint and coatings.
These primers have excellent adhesion to plastic. Use them to prepare your surface to extend the life of paint and coatings.
Cover stains from smoke, water, and ink to prevent them from bleeding through your topcoat, extending the life of paint and coatings.
These primers fill surface cracks and are sandable for a smooth basecoat. Use them to prepare your surface to extend the life of paint and coatings.
Use these primers in enclosed occupied areas, such as hospitals, schools, and offices. They cover stains and prepare your surface, extending the life of paint and coatings.
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.
An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.
These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.
These adhesives come in a tube.
Use cartridges with a standard caulk gun for quick and easy dispensing.
Bond glass and stone to drywall, treated lumber, and subfloors.
Remove silicone, foam sealants, caulk, wet or dry latex-based foams, and construction adhesives.