About Sealant Flexibility
More
About Paint and Protective Coatings
More
Silicone Sealants
Made from silicone, these sealants are RTV (room-temperature vulcanizing). They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Specifications Met | Clarity | Choose a Color | Each | |
Momentive/GE Silicone | ||||||||||||||
RTV230 A/B | 13.5 | Syringe | 5 min. | 24 hrs. | 280% | -25% to 25% | Soft (Durometer 36A) | -55° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry | UL 94 HB | Opaque | White | 00000000 | 000000 |
Rutland 500ºF RTV High Heat Silicone | ||||||||||||||
76 | 2.7 | Tube | 10 min. | 24 hrs. | 500% | Not Rated | Soft (Durometer 25A) | -70° to 500° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Rubber Rubber to Glass Glass Masonry Wood | ASTM C920 Type S Grade NS Class 25, FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group I Type I, NSF/ANSI 51 | __ | 00000000 | 00000 | |
76 | 10.3 | Cartridge | 10 min. | 24 hrs. | 500% | Not Rated | Soft (Durometer 25A) | -70° to 500° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Rubber Rubber to Glass Glass Masonry Wood | ASTM C920 Type S Grade NS Class 25, FDA Compliant 21 CFR 177.2600, MIL-A-46106 Group I Type I, NSF/ANSI 51 | __ | 00000000 | 00000 | |
Silicone | ||||||||||||||
__ | 9.8 | Cartridge | 5 min. | 24 hrs. | Not Rated | -25% to 25% | Not Rated | -40° to 350° | Metal Metal to Plastic Metal to Glass Plastic Plastic to Glass Glass | ASTM C920 Type S Grade NS Class 25 | __ | 000000 | 00000 |
Noncorrosive Silicone Sealants
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Sealants that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Cannot Be Sold To | Color | Each | |
Loctite® Silicone | |||||||||||||
SI 5011 CL | 2.7 | Tube | 20 min. | 24 hrs. | 300% | Not Rated | Soft (Durometer 20A) | -75° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | __ | Clear | 0000000 | 000000 |
SI 5011 CL | 10.1 | Cartridge | 20 min. | 24 hrs. | 300% | Not Rated | Soft (Durometer 20A) | -75° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | __ | Clear | 0000000 | 00000 |
SI 5109 | 10.1 | Cartridge | 60 min. | 24 hrs. | 300% | Not Rated | Soft (Durometer 15A) | -75° to 600° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | __ | Red | 0000000 | 00000 |
Permatex Silicone | |||||||||||||
81173 | 12.9 | Cartridge | 30 min. | 24 hrs. | 350% | Not Rated | Soft (Durometer 15A) | -75° to 450° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | CA | Black | 0000000 | 00000 |
Low-Outgassing Silicone Sealants
Compliant with ASTM E-595, these sealants produce almost no volatile materials in a vacuum. They’re made of silicone, so they’re RTV (room-temperature vulcanizing).
Elongation indicates flexibility—the higher the value is, the more a sealant can stretch.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | Specifications Met | For Joining | Color | Each | |
5.8 | Cartridge | 150 min. | 7 days | 420% | -25% to 25% | 600 | Durometer 36A (Medium Soft) | -200° to 500° | ASTM E595 | Metal Plastic Rubber Composites Glass | White | 0000000 | 0000000 |
Puncture-Resistant Sealants
Form seals that resist punctures, cuts, and abrasion to withstand heavy wear and tampering. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Polyurethane | ||||||||||||
10.1 | Cartridge | 90 min. | 48 hrs. | 225% | -12.5% to 12.5% | 250 | Medium (Durometer 55A) | 20° to 120° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | White | 0000000 | 000000 |
20 | Sausage Pack | 90 min. | 48 hrs. | 225% | -12.5% to 12.5% | 250 | Medium (Durometer 55A) | 20° to 120° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | White | 0000000 | 00000 |
All-Weather Application Structural Sealants
Apply these sealants in cold temperatures, on wet surfaces, and even through running water. They are structural sealants that combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. Sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | |
Polyether | ||||||||||||
5 fl. oz. | Tube | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | White | 000000 | 00000 |
10.1 fl. oz. | Cartridge | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 0000000 | 00000 | |
20 fl. oz. | Sausage Pack | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 00000 | |
28 fl. oz. | Cartridge | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 00000 | |
2 gal. | Pail | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 000000 | |
5 gal. | Pail | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 000000 |
Self-Leveling Oil- and Fuel-Resistant Sealants
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation and joint expansion/compression tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint expansion/compression tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Sealants that cannot be sold to California exceed local regulatory limits on VOC (volatile organic compounds).
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Choose a Color | Cannot Be Sold To | Each | |
Buna-N | |||||||||||||
4 | Tube | 10 min. | 24 hrs. | 1,000% | Not Rated | Not Rated | Soft (Durometer 25A) | -30° to 300° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | CA | 0000000 | 00000 | |
10.3 | Cartridge | 10 min. | 24 hrs. | 600% | Not Rated | Not Rated | Soft (Durometer 30A) | -30° to 300° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | CA | 0000000 | 0000 |
Oil- and Fuel-Resistant Sealants
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces. They’re thicker than most non-sagging sealants, so they can be used in vertical joints up to 1/2" wide.
Elongation indicates flexibility—the higher the values are, the more sealants can stretch. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Silicone sealants have excellent ozone resistance.
Sealants that cannot be sold to California exceed local regulatory limits on VOC (volatile organic compounds).
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Cannot Be Sold To | Each | |
Buna-N | ||||||||||||||
__ | 10.3 | Cartridge | 10 min. | 24 hrs. | 100% | Not Rated | Not Rated | Soft (Durometer 20A) | -30° to 300° | Metal Plastic Rubber Composites Glass Masonry Wood | Aluminum | CA | 0000000 | 000000 |
Momentive/GE Silicone | ||||||||||||||
FRV1106 | 5.4 | Cartridge | 20 min. | 7 days | 200% | -25% to 25% | 485 | Medium Soft (Durometer 35A) | -75° to 395° | Metal Plastic Rubber Composites Glass | Red | __ | 00000000 | 000000 |
FRV1106FC | 5.4 | Cartridge | 30 min. | 7 days | 300% | -25% to 25% | 500 | Soft (Durometer 30A) | -75° to 395° | Metal Plastic Rubber Composites Glass | Red | __ | 00000000 | 000000 |
Structural Oil- and Fuel-Resistant Sealants
Impervious to the swelling effects of oils, fuels, and solvents, use this high-strength silicone sealant to assemble and repair fuel systems and tanks. Silicone forms a tough, rubbery, UV-resistant seal that remains flexible over time. It's non-sagging, so it won't drip from vertical and overhead surfaces. Also known as RTV (room-temperature vulcanizing).
Elongation and joint expansion/compression tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. This sealant is best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Dow Corning Silicone | |||||||||||||
730 FS | 3 | Tube | 12 min. | 24 hrs. | 200% | Not Rated | 300 | Medium Soft (Durometer 40A) | -70° to 350° | Metal, Plastic, Rubber, Composites, Masonry | White | 0000000 | 0000000 |
730 FS | 5.8 | Cartridge | 12 min. | 24 hrs. | 200% | Not Rated | 300 | Medium Soft (Durometer 40A) | -70° to 350° | Metal, Plastic, Rubber, Composites, Masonry | White | 0000000 | 000000 |
High-Strength Self-Leveling Concrete Joint Sealants
Seal concrete joints in high-traffic locations—these sealants stand up to heavy wear and tear, such as steel wheel traffic. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Silicone sealant is RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | For Max. Crack | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Mix Ratio | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Temp. Range, °F | For Joining | Color | Each | |
Loctite® Polyurethane | |||||||||||||||
PC 6231 | 8.6 | Cartridge | 3 min. | 90 min. | 1:1 | 82% | -10% to 10% | Hard (Durometer 75A) | 3/4" | 2 1/4" | -40° to 120° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | Gray | 0000000 | 000000 |
Silicone | |||||||||||||||
__ | 29 | Cartridge | 60 min. | 7 days | __ | 1,000% | -50% to 100% | Soft (Durometer 20A) | 1" | 1/2" | -60° to 300° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Limestone | 0000000 | 00000 |
Self-Leveling All-Weather Application Concrete Joint Sealants
Apply these sealants on wet surfaces and in cold temperatures. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain.
Container | For Max. Crack | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Application Temp. Range, °F | Temp. Range, °F | For Joining | Choose a Color | Each | |
Hybrid Polymer | ||||||||||||||
28 | Cartridge | 45 min. | 48 hrs. | 400% | Not Rated | Soft (Durometer 25A) | 1" | 1" | 35° to 120° | -75° to 300° | Metal, Plastic, Rubber, Asphalt, Composites, Masonry, Wood | 0000000 | 000000 |
All-Weather Application Concrete Joint Sealants
Apply these sealants on wet surfaces and in cold temperatures. They're non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | For Max. Crack | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Wd. | Dp. | Application Temp. Range, °F | Temp. Range, °F | For Joining | Choose a Color | Each | |
Polyether | |||||||||||||||
28 | Cartridge | 30 min. | 48 hrs. | 1,000% | -50% to 50% | 125 | Not Rated | 1" | 1" | 32° to 120° | -75° to 300° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
Roof Joint Sealants
Keep out the elements by sealing roof joints. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces. They are good for use in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Buna-N | ||||||||||||
10.3 | Cartridge | 30 min. | 3 days | Not Rated | Not Rated | Not Rated | Not Rated | Not Rated to 400° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | Aluminum | 0000000 | 000000 |
Self-Leveling Roof Joint Sealants
Keep out the elements by sealing roof joints. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish. They're good for use in environments with wide temperature fluctuation.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Tensile Strength | Hardness | Application Temp. Range, °F | Temp. Range, °F | For Joining | Color | Each | |
Buna-N | |||||||||||
10.3 | Cartridge | 30 min. | 3 days | Not Rated | Not Rated | 40° to 100° | Not Rated to 400° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | Aluminum | 0000000 | 000000 |
EPDM Rubber | |||||||||||
10.3 | Cartridge | 4 hrs. | 3 days | Not Rated | Not Rated | 20° to 120° | -40° to 200° | Metal, Plastic, Rubber, Asphalt, Composites, Masonry, Wood | Black | 0000000 | 00000 |
Light-Activated Urethane Potting Compounds
In just 20 seconds under a UV light, these urethane compounds form into a strong protective layer on electrical components. They withstand a wide range of temperatures and are good electrical insulators. They also stop chemicals, moisture, and dust from damaging your device. With excellent flexibility, they protect against vibration and impact. Since they also work as an adhesive, you can use them to bond and insulate components such as electrical connectors and thermal switches. No mixing required.
Dry Time | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch, sec. | Overall, sec. | Light Intensity Requirements to Reach Full Strength | Cure Type | Hardness Rating | Dielectric Strength, V/mil | Thermal Conductivity | Temp. Range, °F | For Use On | Color | Each | |
1.69 | Thin Liquid | 20 | 20 | 20 sec. @ 100 mW/cm2 | UV Light | Extra Hard | 1,800 | Not Rated | -40° to 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Polycarbonate Plastic, ABS Plastic, PVC Plastic, Polyimide Plastic, Garolite, Ceramic, Glass, Plastic | Clear | 0000000 | 000000 |
Urethane Potting Compounds
Encase electronic assemblies in a layer of urethane for protection from dust, moisture, chemicals, mechanical shock, and vibration. Urethanes withstand a wide range of temperatures and are the best choice for cold-temperature applications. They have excellent flexibility, good chemical and moisture resistance, and provide good electrical insulation.
Cartridge potting compounds can be applied precisely through the included mixer nozzle. You’ll need a dispensing gun (sold separately). US2350™ also require a 4:1 plunger (sold separately) to dispense.
Bottle potting compounds are easier to apply in high volumes than cartridge potting compounds. Mix the compounds together and pour them over components inside potting boxes and other containers. If mixing introduces any air bubbles, put the mixture in a vacuum chamber.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
Loctite® Compounds—Medium Hard | |||||||||||
US2350 | 1.69 | Thick Liquid | 90 | 24 | 950 | 0.51 | -40° to 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Ceramic, Glass, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, Polyimide Plastic, Garolite | Black | 0000000 | 000000 |
Loctite® Compounds—Soft | |||||||||||
US2651 | 6.76 | Thin Liquid | 10 | 16 | 1,050 | Not Rated | -85° to 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Ceramic, Glass, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, Polyimide Plastic, Garolite | Amber | 0000000 | 00000 |
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
Extra Hard | ||||||||||
12.6 | Thin Liquid | 45 | 24 | 400 | 0.3 | -55° to 245° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Ceramic, Glass, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, Polyimide Plastic, Garolite | Black | 00000000 | 000000 |