We will reply to your message within an hour.
More
Made from silicone, these sealants are RTV (room-temperature vulcanizing).
These sealants include a material certificate with traceable lot number, test report, and product shelf life.
Resistant to mold and mildew, these sealants are well suited to high-humidity environments.
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.
This sealant includes a material certificate with traceable lot number, test report, and product shelf life.
Compliant with ASTM E-595, these sealants produce almost no volatile materials in a vacuum.
A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.
Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.
Apply these sealants in cold temperatures, on wet surfaces, and even through running water.
Thinner than non-sagging sealants, this sealant flows easily into cracks and has a smooth finish.
Meeting requirements for semiconductor, biomedical, and electronics clean rooms, these sealants won’t contaminate air and surfaces.
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.
Made from silicone, these sealants are RTV (room-temperature vulcanizing). They combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
Mix a small amount of water-based paint with this caulk to match the color of your surface.
Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.
Press this adhesive-backed plastic tape into place for an immediate light-duty seal.
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.
These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.
Seal leaks on vacuum systems and components.
Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.
These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
These sealants don't degrade in sunlight.
Press this pliable rope into place to hold glass in window frames and seal leaks.
Also known as glazing compounds, use these sealants to install glass in aluminum, steel, and wood framing.
Repair equipment and vehicle windows with these sealants that are rated to withstand impact within three hours of application.
Seal glass windows in metal and wood fire-rated doors.
Prevent the edges of tape, signs, and graphics from peeling by sealing out water and debris.
Prepare joints and surfaces to ensure proper sealant adhesion.
Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.
Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.
Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.
Use these coatings in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry.
Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.
Spray these coatings on glass to create a clear, scratch-resistant surface that repels oil and water. They’re also known as oleophobic and hydrophobic coatings.
Put a temporary dull finish on glossy surfaces. Wipe to remove.
Spray these thin coatings onto most types of metal, plastic, and glass for a washable coating that protects the underlying surface from scratches. They can be easily peeled off if removed within six months.
These coatings are often used on castings, dies, and mirrors to prevent rust, abrasion, and moisture penetration.
Apply these wear-resistant coatings to wood to protect from scuffs, water, and oil damage.
No mixing required—these potting compounds come ready to apply.
Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds.
Change the mix ratio of these heat-transfer potting compounds to achieve the right hardness for your application.
Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics.
In just 20 seconds under a UV light, these urethane compounds form into a strong protective layer on electrical components.
The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.
Urethanes withstand a wide range of temperatures and are the best choice for cold-temperature applications. They have excellent flexibility, good chemical and moisture resistance, and provide good electrical insulation.
Spray this paint on the back of glass or clear plastic to create a reflective silver effect on the other side.
Create a washable writing surface.
Turn any surface into a dry-erase board.
Made of rubber and iron oxide, these sheets can be cut with scissors to create custom-shaped nonmetallic, nonmagnetic surface that magnets will stick to.
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.
Use cartridges with a standard caulk gun for quick and easy dispensing.
Create a seal to get your machine back up and running in just two hours. These gasket makers have a thick consistency that creates a seal right away, even before they harden.
The thick consistency of these gasket makers creates a seal right away even before they harden. Press the nozzle to dispense a uniform bead.
These gasket makers combine oil resistance and the flexibility to accommodate movement.
Create gaskets that can flex to accommodate movement and won’t degrade from oil.
Form dense, rigid gaskets that won’t degrade in the presence of oil.
With a standard caulk gun, quickly and easily make dense, rigid gaskets that won’t degrade from oil.
Dispense a uniform bead when you press the nozzle.
These gasket makers combine the ability to withstand temperatures up to 600° F with the flexibility to accommodate movement.
Bond glass and stone to drywall, treated lumber, and subfloors.