McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    40 Products

    Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Bit Sets, For Hand Tools.

    Hex Shank

    Have a range of bits ready to turn the most common screw styles and sizes.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    No. of
    Pieces
    Components Included
    Bits Included
    Adapters Included
    Drive Tools Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    381 Adapter
    1 Drive Tool
    36 Bits    		Drilled Spanner: No. 4, No. 6, No. 8, No. 10 (1" O'all Lg.)
    Phillips: No. 1 (1" O'all Lg.) - 1 ea.
    Phillips: No. 2 (1" O'all Lg.) - 2 ea.
    Pozidriv®: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 5/16"
    Square: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Tamper-Resistant Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (1" O'all Lg.)
    Tamper-Resistant Torx: T8, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)
    Torq-Set®: No. 6, No. 8, No. 10 (1" O'all Lg.)
    Tri-Wing®: No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)    		1/4" Hex Drive Adapter3 1/2" Lg. Ratchet WrenchSteelPlastic Case000000000000
    391 Drive Tool
    2 Adapters
    36 Bits    		Drilled Spanner: No. 4, No. 6, No. 8, No. 10 (1" O'all Lg.)
    Phillips: No. 1, No. 2 (1" O'all Lg.)
    Pozidriv®: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 1/4", 5/16" (1" O'all Lg.)
    Square: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Tamper-Resistant Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (1" O'all Lg.)
    Tamper-Resistant Torx: T8, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)
    Torq-Set®: No. 6, No. 8, No. 10 (1" O'all Lg.)
    Tri-Wing®: No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)    		1/4" Female Square Drive × 1/4" Female Hex Adapter
    2 1/4" Lg. Bit Adapter for Power Tools    		Screwdriver HandleSteelPlastic Case000000000000
    1004 Adapters
    96 Bits    		Drilled Spanner: No. 4, No. 6, No. 8, No. 10, No. 12, 1/4" (1" O'all Lg.)—1 ea.
    Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (1" O'all Lg.)—1 ea.
    Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm (1" O'all Lg.)—1 ea.
    Phillips: No. 0 (1" O'all Lg.)—1 ea.
    Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea.
    Phillips: No. 2 (1" O'all Lg.)—4 ea.
    Pozidriv®: No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea.
    Screw-In Hook Driver Bit—1 ea.
    Slotted: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8" (1" O'all Lg.)—1 ea.
    Square: No. 0, No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)—1 ea.
    Tamper-Resistant Hex (Inch): 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16" (1" O'all Lg.)—1 ea.
    Tamper-Resistant Hex (Metric): 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea.
    Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea.
    Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, T45, T50, T55 (1" O'all Lg.)—1 ea.    		1/4" Male Square Drive × 1/4" Hex Shank Adapter (1" O'all Lg.)
    1/4" Male Square Drive × 1/4" Hex Shank Adapter (2" O'all Lg.)
    2 1/2" Lg. Bit Adapter for Power Tools
    Bit Adapter for Square Drive Tools    		—SteelPlastic Case00000000000
     

    Maintenance Bit Socket Sets

    Image of Product. Front orientation. Bit Sockets. Maintenance Bit Socket Sets.
    Image of Specification. Front orientation. For Torx Drives. Maintenance Bit Socket Sets.
    Image of Specification. Front orientation. For Hex Drives. Maintenance Bit Socket Sets.
    Image of Specification. Front orientation. For Tamper-Resistant Torx Drives. Maintenance Bit Socket Sets.
    Image of Specification. Front orientation. For External Torx Drives. Maintenance Bit Socket Sets.

    For

    Torx

    Drives

    For

    Hex

    Drives

    For

    Tamper-Resistant

    Torx Drives

    For

    External

    Torx

    Drives

    Image of Specification. Front orientation. For Phillips Drives.
    Image of Specification. Front orientation. For Slotted Drives.
    Image of Specification. Front orientation. For Pozidriv® Drives.

    For

    Phillips

    Drives

    For

    Slotted

    Drives

    For

    Pozidriv®

    Drives

    Keep a convenient variety of drive styles and sizes of bit sockets on hand. For use with hand-drive tools only.
    No. of
    Pieces
    Sockets Included
    Material (Socket Style)
    Container
    Type
    For Drive Style
    Each
    3/8" Square Drive
    373/8" Hex Bit Sockets (Inch): 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (2" O'all Lg.)
    3/8" Hex Bit Sockets (Metric): 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 10 mm (2" O'all Lg.)
    3/8" Torx Bit Sockets: T20, T27, T30, T40, T45, T50, T55 (2" O'all Lg.)
    3/8" Tamper-Resistant Torx Bit Sockets: T15, T20, T25, T27, T30, T40, T45, T50, T55 (2" O'all Lg.)
    3/8" Phillips Bit Sockets: No. 1, No. 2, No. 3 (2" O'all Lg.)
    3/8" Slotted Bit Sockets: 4 mm, 5 mm, 6 mm (2" O'all Lg.)
    3/8" Pozidriv Bit Sockets: No. 2 (2" O'all Lg.)    		Chrome-Plated Steel (Bit Sockets)Foam TrayHex, Phillips, Pozidriv®, Slotted, Tamper-Resistant Torx, Torx000000000000000
     
    1/4", 3/8", 1/2" Square Drive
    801/4" Hex Bit Sockets (Inch): 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1 1/2" O'all Lg.)
    1/4" Hex Bit Sockets (Metric): 2.5 mm, 3 mm, 4 mm, 5 mm (1 1/2" O'all Lg.)
    1/4” Hex Bit Sockets: T8, T10, T15, T20, T25, T27, T30 (6" O'all Lg.)
    3/8" Hex Bit Sockets (Inch): 5/16", 3/8" (1 7/8" O'all Lg.)
    3/8" Hex Bit Sockets (Metric): 6 mm, 7 mm, 8 mm, 9 mm, 10 mm (1 7/8" O'all Lg.)
    3/8" Hex Bit Sockets (Metric): 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm (6" O'all Lg.)
    1/2" External Torx Standard Sockets: E18, E20, E22, E24 (1 1/2 O'all Lg.)
    1/2" Hex Bit Sockets (Inch): 7/16", 1/2", 9/16", 5/8" (2" O'all Lg.)
    1/2" Hex Bit Sockets (Metric): 12 mm, 14 mm, 17 mm (2" O'all Lg.)
    1/4" Torx Bit Sockets: T8, T10, T15, T20, T25, T27, T30 (1 1/2" O'all Lg.)
    3/8" Torx Bit Sockets: T30, T40, T45, T50, T55 (1 7/8" O'all Lg.)
    3/8" Torx Bit Sockets: T40, T45, T50 (6" O'all Lg.)
    1/2" Tamper-Resistant Torx Bit Sockets: T60 (2" O'all Lg.)
    1/2" Torx Bit Sockets: T60 (2" O'all Lg.)
    1/4" External Torx Standard Sockets: E4, E5, E6, E7, E8 (1 1/8" O'all Lg.)
    1/4" Tamper-Resistant Torx Bit Sockets: T7, T8, T10, T15, T20, T25, T27, T30 (1 1/2" O'all Lg.)
    3/8" External Torx Standard Sockets: E10, E12, E14, E16 (1 1/8" O'all Lg.)
    3/8" Tamper-Resistant Torx Bit Sockets: T40, T45, T50, T55 (1 7/8" O'all Lg.)    		Chrome-Plated Steel (Bit Sockets), Black-Oxide Steel (Standard Sockets)Plastic CaseHex, Tamper-Resistant Torx, Torx, External Torx000000000000000
     

    Adjustable Screwdriver Sets

    Image of Product. Chrome-Plated Steel with Ultra Grip. Front orientation. Screwdrivers. Adjustable Screwdriver Sets, Ultra Grip.

    Chrome-Plated Steel with

    Ultra Grip

    Say goodbye to bulky screwdriver sets. Just swap out the shaft to fasten a variety of screws with a single tool. These screwdrivers free up space in your toolkit and are easy to carry wherever the job takes you.
    Screwdrivers with an adjustable handle let you modify the shaft's length. Press down on the handle’s collar to slide the shaft in or out.
    Chrome-Plated Steel—The bright, shiny plating resists salt water and chemicals better than other finishes and is less likely to wear off.
    Ultra Grip—Designed for maximum comfort and control. The soft plastic coating and contoured shape reduce strain to prevent cramping and soreness during repetitive tasks. They also guarantee a secure grip.
    No. of
    Pieces
    Components Included
    Sizes Included
    Overall Lg.
    Grip
    Style
    Each
    Chrome-Plated Steel
    61 Adjustable Screwdriver Handle
    5 Reversible Shafts    		Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25, T30, T406 1/4" to 9 1/4"Ultra Grip000000000000
    151 Adjustable Screwdriver Handle
    14 Reversible Shafts    		Hex: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm
    Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16"
    Phillips: No. 1, No. 2
    Slotted: 9/64", 3/16", 7/32", 17/64"
    Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25, T30, T40    		6 1/4" to 9 1/4"Ultra Grip000000000000
     
    Reversible Shafts
    Drive Size
    Overall
    Lg.
    Material
    Each
    Hex
    3/32" x 7/64"6"Chrome-Plated Steel000000000000
    1/8" x 9/64"6"Chrome-Plated Steel00000000000
    5/32" x 3/16"6"Chrome-Plated Steel00000000000
    2 mm x 2.5 mm6"Chrome-Plated Steel00000000000
    3 mm x 4 mm6"Chrome-Plated Steel00000000000
    5 mm x 6 mm6"Chrome-Plated Steel00000000000
     
    Slotted and Phillips
    1/8" x No. 06"Chrome-Plated Steel000000000000
    5/32" x No. 16"Chrome-Plated Steel000000000000
    1/4" x No. 26"Chrome-Plated Steel000000000000
     
    Square
    No. 1 x No. 26"Chrome-Plated Steel000000000000
     
    Tamper-Resistant Torx
    T6 x T86"Chrome-Plated Steel000000000000
    T7 x T96"Chrome-Plated Steel000000000000
    T10 x T156"Chrome-Plated Steel000000000000
    T20 x T256"Chrome-Plated Steel000000000000
    T30 x T406"Chrome-Plated Steel000000000000
     

    Tamper-Resistant Torx Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Tamper-Resistant Torx Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Tamper-Resistant Torx Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change Hex

    Shank

    Turn a variety of tamper-resistant Torx screws on electronic enclosures and other access-controlled equipment. The bits in these sets have six lobes that withstand high pressure without stripping the drive. Also known as pin-in-Torx bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    7 BitsTamper-Resistant Torx: T7, T8, T9, T10, T15, T20, T25 (1" O'all Lg.)SteelPlastic Case0000000000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    10 BitsTamper-Resistant Torx: T7, T8, T9, T10, T15, T20, T25, T27, T30, T40 (2" O'all Lg.)SteelPlastic Caddy000000000000
     

    Tri-Wing® Bit Sets

    Image of Product. Front orientation. Screwdriver Bits. Tri-Wing® Bit Sets.
    The bits in these sets turn Tri-Wing® screws, which are commonly found on electronics. They have offset wings that withstand high torque without slipping and damaging the drive.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    6 BitsTri-Wing®: No. 0, No. 1, No. 2, No. 3, No. 4, No. 5 (1" O'all Lg.)SteelPlastic Caddy0000000000000
     

    Impact Tamper-Resistant Torx Bit Socket Sets

    Image of Product. Front orientation. Bit Sockets. Impact Tamper-Resistant Torx Bit Socket Sets.
    Image of Specification. Front orientation. For Tamper-Resistant Torx Drives.

    For

    Tamper-Resistant

    Torx Drives

    The hole in the middle of these bits fits the security pin in tamper-resistant Torx screws. Also known as pin-in Torx bits. These sockets are sturdier and have more give than manual-drive sockets, so they'll withstand the high torque and force of impact tools.
    No. of
    Pieces
    Sockets Included
    Overall Lg.
    Material
    For Drive Style
    Each
    1/4", 3/8", 1/2" Square Drive
    121/2" Square Drive Size: T60 (3" O'all Lg.)
    1/4" Square Drive Size: T10, T15, T20, T25, T27, T30 (1 3/8" O'all Lg.)
    3/8" Square Drive Size: T40, T45, T47, T50, T55 (2" O'all Lg.)    		1 3/8" to 3"Black-Oxide SteelTamper-Resistant Torx
    		00000000000000
     

    Screwdriver Sets

    Image of Product. Front orientation. Screwdrivers. Screwdriver Sets, Ultra Grip.

    Ultra Grip

    Keep a selection of screwdrivers on hand to turn fasteners of any size
    Steel—Best for dry environments, since moisture will cause it to rust.
    Ultra Grip—Designed for maximum comfort and control. The soft plastic coating and contoured shape reduce strain to prevent cramping and soreness during repetitive tasks. They also guarantee a secure grip.
    No. of
    Pieces
    Includes
    Material
    Grip
    Style
    Container
    Type
    Each
    Tamper-Resistant Torx
    6T10 Tamper-Resistant Torx Screwdriver—6 1/2" O'all Lg.
    T15 Tamper-Resistant Torx Screwdriver—7" O'all Lg.
    T20 Tamper-Resistant Torx Screwdriver—7 3/4" O'all Lg.
    T25 Tamper-Resistant Torx Screwdriver—8" O'all Lg.
    T30 Tamper-Resistant Torx Screwdriver—8 3/4" O'all Lg.
    T40 Tamper-Resistant Torx Screwdriver—9 3/4" O'all Lg.    		SteelUltra GripPlastic Rack00000000000000
     

    Tri-Groove Bit Sets

    Image of Product. Front orientation. Screwdriver Bits. Tri-Groove Bit Sets.
    The bits in these sets turn tri-groove screws. They're commonly used to fasten signs, lighting fixtures, and other types of public property.
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    High-Speed Steel—Harder and more heat resistant than plain steel. These bits withstand the intense friction of high-speed power tools without deforming or softening.
    Components
    Included
    Bits Included
    Material
    Container
    Type
    Each
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    4 BitsTri-Groove: 0.375" O'all Dia. for No. 1-No. 8 (1 3/8" O'all Lg.)
    Tri-Groove: 0.5" O'all Dia. for No. 5-No. 11 (1 1/4" O'all Lg.)
    Tri-Groove: 0.75" O'all Dia. for No. 12-No. 13, 5/16" (1 1/4" O'all Lg.)
    Tri-Groove: 0.875" O'all Dia. for No. 8-No. 12, 1/4" (1 1/4" O'all Lg.)    		High-Speed SteelPlastic Pouch0000000000000
     

    Drilled Spanner Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Drilled Spanner Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Drilled Spanner Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change

    Hex Shank

    The bits in these sets turn drilled-spanner screws. With two thin contact points, they can't deliver a lot of torque, so they may slip if you use too much force. Also known as pig-nose bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    6 BitsDrilled Spanner for 0.134" Ctr.-to-Ctr.: No. 6 (1" O'all Lg.)—2 ea.
    Drilled Spanner for 0.164" Ctr.-to-Ctr.: No. 8 (1" O'all Lg.)—2 ea.
    Drilled Spanner for 0.198" Ctr.-to-Ctr.: No. 10 (1" O'all Lg.)—2 ea.    		SteelPlastic Pouch00000000000000
     
    5/16" Hex Shank Size
    7 BitsDrilled Spanner for 0.162" Ctr.-to-Ctr.: No. 6 (1 1/4" O'all Lg.)—2 ea.
    Drilled Spanner for 0.186" Ctr.-to-Ctr.: No. 8 (1 1/4" O'all Lg.)—2 ea.
    Drilled Spanner for 0.209" Ctr.-to-Ctr.: No. 10 (1 1/4" O'all Lg.)—2 ea.
    Drilled Spanner for 0.223" Ctr.-to-Ctr.: No. 12 (1 1/4" O'all Lg.)—1 ea.    		SteelPlastic Pouch000000000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    4 BitsDrilled Spanner for 0.108" Ctr.-to-Ctr.: No. 4 (2" O'all Lg.)—1 ea.
    Drilled Spanner for 0.162" Ctr.-to-Ctr.: No. 6 (2" O'all Lg.)—1 ea.
    Drilled Spanner for 0.186" Ctr.-to-Ctr.: No. 8 (2" O'all Lg.)—1 ea.
    Drilled Spanner for 0.209" Ctr.-to-Ctr.: No. 10 (2" O'all Lg.)—1 ea.    		SteelPlastic Pouch000000000000
     

    Tamper-Resistant Hex Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Tamper-Resistant Hex Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Tamper-Resistant Hex Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change Hex

    Shank

    Turn a variety of tamper-resistant hex screws on electronic enclosures and other access-controlled equipment. Their six contact points deliver more torque than slotted and Phillips bits without slipping and stripping the drive. Also known as pin-in-hex or pin-in-socket bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    6 BitsTamper-Resistant Hex: 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)SteelPlastic Caddy0000000000000
    11 BitsTamper-Resistant Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (1" O'all Lg.)SteelPlastic Pouch000000000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    6 BitsTamper-Resistant Hex: 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (2" O'all Lg.)SteelPlastic Caddy000000000000
    8 BitsTamper-Resistant Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (2" O'all Lg.)SteelPlastic Caddy000000000000
     

    Tamper-Resistant Hex Bit Socket Sets

    Image of Product. Front orientation. Bit Sockets. Tamper-Resistant Hex Bit Socket Sets .
    Image of Specification. Front orientation. For Tamper-Resistant Hex Drives.

    For

    Tamper-Resistant

    Hex Drives

    These sockets are also known as pin-in-hex or pin-in-socket bits.
    No. of
    Pieces
    Sockets Included
    Overall
    Lg.
    Material
    For Drive Style
    Each
    3/8" Square Drive
    72 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (1 5/8" O'all Lg.)1 3/4"Chrome-Plated SteelTamper-Resistant Hex
    		0000000000000
    95/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1 1/2" O'all Lg.)1 1/2"Chrome-Plated SteelTamper-Resistant Hex
    		000000000000
     

    Tamper-Resistant Torx Bit Socket Sets

    Image of Product. Front orientation. Bit Sockets. Tamper-Resistant Torx Bit Socket Sets.
    Image of Specification. Front orientation. For Tamper-Resistant Torx Drives.

    For

    Tamper-Resistant

    Torx Drives

    These sockets are also known as pin-in-Torx bits.
    No. of
    Pieces
    Sockets Included
    Overall Lg.
    Material
    For Drive Style
    Each
    3/8" Square Drive
    7T25, T27 (1 27/32" O'all Lg.)
    T30, T40, T45, T47, T50 (1 31/32" O'all Lg.)    		1 27/32" to 1 31/32"Chrome-Plated SteelTamper-Resistant Torx
    		00000000000000
     
    1/4", 3/8", 1/2" Square Drive
    131/2" Square Drive Size: T60 (2 1/2" O'all Lg.)
    1/4" Square Drive Size: T7, T8, T10, T15, T20, T25, T27, T30 (1 9/16" O'all Lg.)
    3/8" Square Drive Size: T40, T45, T50 (1 7/8" O'all Lg.), T55 (2" O'all Lg.)    		1 9/16" to 2 1/2"Chrome-Plated SteelTamper-Resistant Torx
    		00000000000000
     

    Torq-Set® Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Torq-Set® Bit Sets, For Hand Tools.

    Hex Shank

    Similar to Phillips bits, but with offset wings for a better grip. The bits in these sets are less likely to slip out of the screw head and damage the fastener.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    10 BitsTorq-Set®: No. 4, No. 6, No. 8, No. 10, 1/4" (1" O'all Lg.)—2 ea.Steel00000000000000
     
    back to top