These steel screws have corrosion-resistant finishes.

These 18-8 stainless steel screws have a hardened steel drill point to penetrate steel and are coated to increase corrosion resistance.

Cutting their own pilot hole and threads as you fasten them into material, these metric screws have a drilling tip.

Stronger and more wear resistant than 18-8 stainless steel, these screws are mildly chemical resistant.

Drill a pilot hole, cut threads, and fasten in one motion with these metric-threaded screws. Made of steel, they’re strong and wear resistant.

The extra-wide truss head distributes holding pressure to reduce the risk of crushing thin metal.

Also known as pancake head screws, these have a head that is about two-thirds the height of standard rounded head screws.

These steel screws save you time and effort by drilling their own holes and fastening in a single operation.

A decorative rounded top provides a finished appearance.

These steel screws are available with corrosion resistant finishes. A rubber-bonded washer compresses to form a watertight seal. They save you time and effort by drilling their own holes and fastening in a single operation.

Made from 410 stainless steel, these screws are strong, wear resistant, and mildly chemical resistant.

Known for their strength, these alloy steel screws are coated to provide corrosion resistance in wet environments.

Made from stainless steel to resist galvanic corrosion, use these screws to fasten aluminum to aluminum and steel framing. They save you time and effort by drilling their own holes and fastening in a single operation.

These screws have a free-rotating, permanently attached washer that remains stationary while tightening to prevent bunching while attaching tarps and other fabric to metal.

18-8 stainless steel screws have good chemical resistance.

Stronger and more wear resistant than 18-8 and 316 stainless steel, these screws are mildly chemical resistant.

One-third the weight of steel, aluminum screws resist corrosion in wet environments.

18-8 stainless steel screws have good chemical resistance.

These steel screws are zinc plated to resist corrosion in wet environments.

Made from 18-8 stainless steel, these screws are chemical resistant.

These steel screws are zinc plated to resist corrosion in wet environments.

18-8 stainless steel screws have good chemical resistance.

A tamper-resistant Torx driver is required for installation and removal. Also known as pin-in-Torx, these screws allow you to apply extra force with less slippage or damage to the recess.

Also known as pin-in-hex, install and remove these screws with a tamper-resistant hex driver.

A flange under the head distributes holding pressure and reduces the risk of crushing thin metal.

18-8 stainless steel screws have good chemical resistance.

Stronger and more wear resistant than 18-8 and 316 stainless steel, these screws are mildly chemical resistant.

These square-drive screws are beveled under the head for use in countersunk holes.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

A tamper-resistant Torx driver is required for installation and removal. Also known as pin-in-Torx, these screws allow you to apply extra force with less slippage or damage to the recess.

The S-shaped drive can be installed with a standard slotted driver, but requires a special tool for removal.

These steel screws are zinc plated to resist corrosion in wet environments.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

These steel screws are zinc plated to resist corrosion in wet environments.

18-8 stainless steel screws have good chemical resistance.

Stronger and more wear resistant than 316 and 18-8 stainless steel, these screws are mildly chemical resistant.

These screws have a hex head for a secure grip with a wrench.

Made from 18-8 stainless steel, these screws are chemical resistant.

These steel screws are zinc plated to resist corrosion in wet environments.

These steel screws are zinc plated to resist corrosion in wet environments.

These steel screws cut threads in drilled holes as they’re turned, so they require less driving torque and cause less stress on your material than thread forming screws.

A Torx drive has more points of contact than a Phillips drive, allowing you to apply extra force with less slippage or damage to the recess.

These steel screws are zinc plated to resist corrosion in wet environments.

A wide cutting slot provides excellent chip clearing and low driving torque in soft metal.

These metric screws have a triangular shank that presses tightly as it forms threads, so screws resist loosening in soft metals such as brass, aluminum, and copper.

These screws have a hex head for a secure grip with a wrench.

These 18-8 stainless steel screws have good chemical resistance.

These steel screws have a black-oxide or zinc-plated finish to resist corrosion.

These steel screws are beveled under the head for use in countersunk holes.

These steel screws are zinc plated to resist corrosion in wet environments.

These steel screws have alternating high and low threads to minimize cracking and splitting in brittle material such as phenolic and glass-filled plastic.

Stronger and more wear resistant than 18-8 stainless steel screws, these are mildly chemical resistant.

These screws cut threads into drilled holes as they’re turned, so they require less driving torque and cause less stress on material than thread-forming screws.

18-8 stainless steel screws have good chemical resistance.

Drive the pointed tip of these screws into soft material, such as wood and drywall. They are also known as lag bolts.

18-8 stainless steel screws have good chemical resistance.

These screws are beveled under the head for use in countersunk holes.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

These steel screws are zinc plated to resist corrosion in wet environments.

Brass screws are corrosion resistant in wet environments and electrically conductive.

Beveled under the head for use in countersunk holes, these steel screws press threads into material for a tight, secure hold.

A decorative rounded top provides a finished appearance. These Phillips screws are beveled under the head for use in countersunk holes. They press threads into material for a tight, secure hold.

These Phillips head screws have a decorative rounded top that provides a finished appearance.

Brass screws are corrosion resistant in wet environments and electrically conductive.

These steel screws are hot-dipped galvanized to resist corrosion in wet environments.

These screws speed installation by drilling, tapping, and fastening wood and metal in a single operation.

A Torx drive has more points of contact than a Phillips drive, allowing you to apply extra force with less slippage or damage to the recess.

18-8 stainless steel screws have good chemical resistance.

Also known as deck screws, these Phillips screws have a sharp point and narrow body to penetrate softwood and plastic-wood composite decking material.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

Thread-forming screws press threads into drilled holes for a tight, vibration-resistant assembly.