Shaft Supports | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Bearing Material Bearing Material

Steel

	Alignment Style Alignment Style

2,652 Products

Linear Motion Shafts

Easy-Access Base-Mounted Shaft Supports

These two-piece supports allow access to the shaft without needing to slide out the shaft or uninstall the support. Use them to brace the end of a linear shaft when working with light to medium loads where shaft alignment is not critical. Tighten the included clamping screws to secure.

Base-Mounted Shaft Supports

Slide the shaft in to install, then tighten to secure. For use with light to medium loads where shaft alignment is not critical, these shaft supports brace the end of a linear shaft along the ground or other flat surface.

Machinable Easy-Access Base-Mounted Shaft Supports

Create a support that fits the exact dimensions of your shaft. Good for use with square- and hex-profile shafts, these aluminum supports also work with round shafts of any diameter up to 1". Use them for light-to-medium-load linear motion applications where shaft alignment is not critical.

Flange-Mounted Shaft Supports

These shaft supports hold linear shafts perpendicular to the mounting surface.

Easy-Access Flange-Mounted Shaft Supports

A removable collar allows access to the shaft without unbolting the flange. For use with light to medium loads where shaft alignment is not critical, these carbon steel supports allow you to hold linear shafts perpendicular to the mounting surface. Secure the shaft by tightening the clamping screw.

Support-Rail Shafts

These shafts include a support rail for a stable setup that eliminates bending and prevents linear bearings from rotating.

Low-Profile Support Rails

At approximately one-third the height of standard versions, these rails provide linear shaft support in applications with low vertical clearance. They provide stability over the entire length of shaft, allow virtually unlimited travel lengths, and eliminate bending under moderate to heavy loads.

Support Rails

Position shafts an inch or two off the ground to maintain bearing and part clearance. Support rails provide stability over the entire length of shaft, allowing virtually unlimited travel lengths and eliminating bending under moderate to heavy loads.

Mounted Sleeve Bearings

Dry-Running Mounted Sleeve Bearings

Made from slippery materials, these bearings reduce friction without the oily mess.

Corrosion-Resistant Dry-Running
Mounted Sleeve Bearings

Use these UHMW bearings in wet, corrosive environments.

Dry-Running Mounted Sleeve
Bearings for Extreme Misalignment

These nylon bearings swivel inside their housing to compensate for over 20° of shaft misalignment.

High-Speed Dry-Running Mounted Sleeve Bearings

Made of acetal blended with PTFE, these bearings handle speeds twice as fast as standard sleeve bearings.

Extreme-Temperature Dry-Running
Mounted Sleeve Bearings

Capable of handling temperatures from -400° to 750° F, these graphalloy bearings withstand the widest temperature range of any of our mounted bearings.

Oil-Embedded Mounted Sleeve Bearings

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.

Vibration-Damping Oil-Embedded
Mounted Sleeve Bearings

With a flexible layer of neoprene sandwiched between an oil-embedded bronze bearing and rigid steel shell, these bearings reduce wear and machinery noise.

High-Speed Oil-Embedded Mounted Sleeve Bearings

A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings.

Mounted Sleeve Bearings

A reliable classic—these babbitt bearings are strong and corrosion resistant.

Mounted Ball Bearings

Low-Profile Mounted Ball Bearings

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Mounted Ball Bearings

Ball bearings operate with less friction than other bearings, so they can run at higher speeds.

Permanently Lubricated Mounted Ball Bearings

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication.

Compact-Base Mounted Ball Bearings

Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.

Washdown Mounted Ball Bearings

Meeting IP69K for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants.

Ultra-Corrosion-Resistant Mounted Ball Bearings

Use these bearings in corrosive environments and under water.

Food Industry Mounted Ball Bearings

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Permanently Lubricated Washdown
Compact-Base Mounted Ball Bearings

These bearings are rated IP69K as able to withstand washdown environments such as food, pharmaceutical, and chemical plants. Their fluoropolymer-coated housing is as corrosion resistant as 304 steel and safe for contact with food.

High-Temperature Mounted Ball Bearings

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings.

High-Speed Mounted Ball Bearings

These bearings have the highest speed ratings of any mounted ball bearing that we offer.

Mounted Roller Bearings

Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.

Mounted Sleeve Bearings with Two-Bolt Flange

Dry-Running Mounted Sleeve
Bearings with Two-Bolt Flange

Embedded lubricant particles increase the load capacity of these bearings while also making them slippery.

Light Duty Dry-Running Mounted
Sleeve Bearings with Two-Bolt Flange

Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.

High-Speed Light Duty Dry-Running Mounted
Sleeve Bearings with Two-Bolt Flange

Made of acetal with a PTFE filling, these light duty bearings handle speeds twice as fast as standard acetal bearings can.

High-Speed Dry-Running Mounted
Sleeve Bearings with Two-Bolt Flange

Handling speeds twice as fast as standard mounted sleeve bearings while limiting wear on your system, these bearings are made of PTFE-filled acetal.

Extreme-Temperature Dry-Running Mounted
Sleeve Bearings with Two-Bolt Flange

Capable of handling temperatures from -400° to 750° F, these graphalloy bearings have the widest temperature range of any of our mounted bearings.

Food Industry Dry-Running Mounted
Sleeve Bearings with Two-Bolt Flange

Made of FDA listed PEEK, these bearings are suitable for direct contact with food. The closed backing blocks out dust and other contaminants.

Oil-Embedded Mounted Sleeve
Bearings with Two-Bolt Flange

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.

Mounted Ball Bearings with Two-Bolt Flange

Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.

Low-Profile Mounted Ball Bearings with Two-Bolt Flange

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Light Duty Mounted Ball Bearings with Two-Bolt Flange

Use these bearings for light loads and small shafts. The closed backing blocks out dust and other contaminants.

Food Industry Mounted Ball
Bearings with Two-Bolt Flange

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

High-Temperature Mounted Ball
Bearings with Two-Bolt Flange

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with two-bolt flange.

Ultra-Corrosion-Resistant Mounted
Ball Bearings with Two-Bolt Flange

Use these bearings in corrosive environments and under water.

Washdown Mounted Ball Bearings with Two-Bolt Flange

Used in food, beverage, pharmaceutical, and chemical plants, these mounted ball bearings are IP69K certified for washdown environments and have a two-bolt flange for mounting.

High-Speed Mounted Ball
Bearings with Two-Bolt Flange

These bearings have the highest speed ratings of any mounted ball bearing in our offering.

Permanently Lubricated Washdown
Mounted Ball Bearings with Two-Bolt Flange

Permanently lubricated and IP69K certified for washdown environments, these mounted ball bearings are useful for hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. Mount them using their two-bolt flange.

Mounted Roller Bearings with Two-Bolt Flange

These roller bearings handle extremely high speeds for their small size.

Mounted Bearings with Four-Bolt Flange

Mounted Ball Bearings with Four-Bolt Flange

A bolt in each corner makes for a secure, even hold.

Permanently Lubricated Washdown
Mounted Ball Bearings with Four-Bolt Flange

Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants.

Food Industry Mounted Ball
Bearings with Four-Bolt Flange

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Ultra-Corrosion-Resistant Mounted
Ball Bearings with Four-Bolt Flange

Use these bearings in corrosive environments and under water.

High-Temperature Mounted Ball
Bearings with Four-Bolt Flange

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with four-bolt flange.

High-Speed Mounted Ball
Bearings with Four-Bolt Flange

These bearings have the highest speed ratings of any mounted ball bearing in our offering.

Mounted Sleeve Bearings with Four-Bolt Flange

With no moving parts, sleeve bearings are better for dirty environments than ball and roller bearings.

Mounted Roller Bearings with Four-Bolt Flange

The tapered rollers in these bearings support large shafts at high static loads.

Washdown Mounted Ball Bearings with Four-Bolt Flange

With a four-bolt flange for mounting and an IP69K certification approving them for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants.

Mounted Bearings with Three-Bolt Flange

With all three mounting holes on one side, you can position the bearing above or below the mounting surface.

Bearing Housings

Ready-Mount Bearing Housings

Mount bearings quickly by using these precision housings, which don’t require any machining.

Ready-Mount Bearing Housings with Two-Bolt Flange

Quickly mount bearings in these precision-flanged housings, no machining required.

Bearing Housings

Use one of these base-mount housings with your own bearing to create a custom mounted bearing.

Bearing Housings with Two-Bolt Flange

Create a custom mounted bearing by adding your own bearing to these flanged housings.

Mounted Linear Bearings

Mounted Linear Ball Bearings

Choose ball bearings for debris-free environments and when speed is a necessity. They operate with less friction than sleeve bearings, so you can run them at higher speeds.

High-Load Mounted Linear Ball Bearings

Designed to handle heavy loads, these bearings have the highest load capacities of any mounted linear ball bearings we offer.

Adjustable Mounted Linear Ball Bearings

Use the adjustment screw in the housing to tighten or loosen the snugness (also known as preload) of the bearing to your shaft.

Corrosion-Resistant Mounted Linear Ball Bearings

Outdoor as well as mild chemical environments are no problem for these bearings. They have stainless steel balls for corrosion resistance.

Mounted Linear Sleeve Bearings

Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication.

Sleeve Bearing Blocks for Washdown Environments

Made from a single piece of slippery UHMW plastic, these bearings have no cracks or crevices so they’re easy to clean.

High-Speed Mounted Linear Sleeve Bearings

A ceramic coating makes high speeds as well as rapid acceleration and deceleration possible.

High-Load High-Speed Mounted Linear Sleeve Bearings

With two bearings mounted in a single housing, these bearings have load capacities more than 10 times as high as standard mounted linear sleeve bearings. A ceramic liner helps them achieve high speeds as well as rapid acceleration and deceleration.

High-Load Mounted Linear Sleeve Bearings

With two bearings mounted in one housing, these sleeve bearings can handle heavier loads than standard mounted linear sleeve bearings.

Frictionless-Motion Mounted Linear Air Bearings

Float bearings on air for precise, frictionless movement. Unlike traditional bearings that can wear your shaft down, these bearings are suspended using pressurized air for linear and rotary motion.

Flange-Mounted Linear Ball Bearings

The flanged housing makes these bearings a good solution for vertical linear motion applications.

Corrosion-Resistant Flange-Mounted
Linear Ball Bearings

The shell, housing, and balls of these bearings are stainless steel for excellent corrosion resistance.

High-Speed Flange-Mounted Linear Sleeve Bearings

A ceramic coating makes high speeds as well as rapid acceleration and deceleration possible.

Chemical-Resistant Flange-Mounted
Linear Sleeve Bearings

The Frelon liner on these bearings allows them to stand up to a wider range of chemicals than other flange-mounted linear sleeve bearings.

Mounted Linear Bearings for Support Rail Shafts

Mounted Linear Sleeve Bearings for Support Rail Shafts

Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication.

High-Speed Mounted Linear Sleeve
Bearings for Support Rail Shafts

A ceramic coating makes high speeds as well as rapid acceleration and deceleration possible.

High-Load High-Speed Mounted Linear
Sleeve Bearings for Support Rail Shafts

With two bearings mounted in a single housing, these bearings have higher load capacities than standard ones. A ceramic liner helps them achieve high speeds as well as rapid acceleration and deceleration.

Mounted Linear Ball Bearings for Support Rail Shafts

Mount these bearings on a support rail shaft for applications requiring maximum rigidity.

High-Load Mounted Linear Ball
Bearings for Support Rail Shafts

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard mounted linear ball bearings for support rail shafts.

Corrosion-Resistant Mounted Linear
Ball Bearings for Support Rail Shafts

Outdoor as well as mild chemical environments are no problem for these bearings. They have stainless steel balls for corrosion resistance.

Mounted Linear Bearings for Spline Shafts

Ready to mount on your linear motion spline shaft, these bearings come installed in a housing and have grooves that match up with the splines on your shaft.

Structural Framing

T-Slotted Framing Mounting Brackets

Attach sensors, tubes, and other components to T-slotted framing rails and structures.

T-Slotted Framing Pivots

Pivots provide smooth motion at the junction between two T-slotted rails.

T-Slotted Framing Hinges

Use hinges to add doors, lids, and machine guards to T-slotted framing.

Miniature T-Slotted Framing and Fittings

Build test fixtures, prototypes, and other small structures with this miniature version of T-slotted framing and fittings.

Sleeve Bearing Carriages and Guide Rails

Sleeve Bearing Carriages for T-Slotted Framing

Mate with a T-slotted rail to add linear motion to your assembly.

Heavy Duty Sleeve Bearing
Carriages for T-Slotted Framing

Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.

Locking Sleeve Bearing Carriages and Guide Rails

A handle on the side of the carriage locks the carriage in place.

High-Temperature Sleeve Bearing
Carriages and Guide Rails

Use these carriages and guide rails in temperatures up to 300° F.

Sleeve Bearing Carriages and Guide Rails

With fewer moving parts and no need for lubrication, sleeve bearing carriages perform better in dusty and wet environments than ball and roller bearing carriages. They're also better at handling impact and vibration.

Extra-Wide Sleeve Bearing Carriages and Guide Rails

With a wide base, these sleeve bearing carriages stabilize moment (twisting) and off-center loads better than standard carriages. Use in areas where multiple carriages or rails won't fit.

Locking Extra-Wide Sleeve
Bearing Carriages and Guide Rails

A handle on the side of the carriage locks the carriage in place.

Low-Profile Sleeve Bearing Carriages and Guide Rails

For applications with low clearance, these carriages protrude less than 5 mm above their rails.

Square Sleeve Bearing Carriages and Guide Rails

The square profile prevents loads from twisting and rotating.

Side-Mount Sleeve Bearing Carriages and Guide Rails

C-shaped guide rails grip the carriage around the outside to support linear motion along walls and other vertical surfaces.

Side-Mount Sleeve Bearing
Carriages for T-Slotted Framing

Fasten loads on the side of these carriages and add linear motion to a T-slot assembly.

Heavy Duty Side-Mount Sleeve Bearing
Carriages for T-Slotted Framing

Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.

Sleeve Bearing Carriages and Guide Rails for Curves

Build loops, circuits, and curved paths in assembly stations and other repetitive processes.

Locking Sleeve Bearing Carriages
and Guide Rails for Curves

A handle locks these carriages in place on curved paths, loops, and circuits in assembly stations and other repetitive processes.

Ball Bearing Carriages and Guide Rails

Horizontal-Mount Quiet-Ride Ball
Bearing Carriages and Guide Rails

Designed for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

Ball Bearing Carriages and Guide Rails

These carriages and guide rails are steel.

Corrosion-Resistant Ball Bearing
Carriages and Guide Rails

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Horizontal-Mount Ball Bearing
Carriages and Guide Rails

Designed specifically for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

Maintenance-Free Ball Bearing
Carriages and Guide Rails

These carriages and guide rails are steel.

Corrosion-Resistant Maintenance-Free
Ball Bearing Carriages and Guide Rails

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Clean Room Ball Bearing Carriages and Guide Rails

Suitable for clean room use, these carriages and guide rails are made entirely of stainless steel.

High-Cycle Ball Bearing Carriages and Guide Rails

A plastic cage surrounds the ball bearings and keeps them from colliding, so these carriages run for many cycles without needing maintenance.

Miniature Ball Bearing Carriages and Guide Rails

These tiny carriages and guide rails are sized for electronic and other precision applications.

Side-Mount Ball Bearing Carriages and Guide Rails

Mount to vertical surfaces for applications where tight tolerances aren't required.

Extra-Wide Ball Bearing Carriages and Guide Rails

With a wide base and low-profile design, these carriages and guide rails stabilize moment (twisting) and off-center loads better than other carriages and rails. They're good for use in areas where multiple carriages or rails won't fit.

High-Cycle Extra-Wide Ball
Bearing Carriages and Guide Rails

With a plastic cage that surrounds the ball bearings to prevent them from colliding, these extra-wide carriages run quietly for many cycles without needing maintenance. All of these carriages have a wide base and low-profile design to stabilize moment (twisting) and off-center loads better than other carriages.

High-Cycle Low-Profile Ball
Bearing Carriages and Guide Rails

Run many cycles in tight spaces before replacing or re-greasing carriages.

Track Roller Carriages and Guide Rails

Locking High-Load Track Roller
Carriages and Guide Rails

A handle on the side of the carriage locks the carriage in place.

High-Load Track Roller Carriages and Guide Rails

Needle-roller bearings give these track roller carriages higher load capacities than other track roller carriages.

Side-Mount Track Roller
Carriages for T-Slotted Framing

Combine with a T-slotted rail to add linear motion to your assembly.

Corrosion-Resistant Side-Mount Track
Roller Carriages and Guide Rails

These track roller carriages and guide rails are stainless steel for use in wet, corrosive environments.

Side-Mount Track Roller Carriages and Guide Rails

Mount along a wall or other vertical surface.

Light Duty Side-Mount Track
Roller Carriages and Guide Rails

Use these carriages and guide rails for light loads where precise movement is not required.

Self-Aligning Side-Mount Track
Roller Carriages and Guide Rails

Create a self-aligning carriage and guide rail system to compensate for mounting surfaces that aren't parallel.

Track Roller Carriages and Guide Rails

V-shaped rollers and rails allow these carriages to operate well in dirty environments because the debris won't get trapped on the rail.

High-Temperature Track Roller
Carriages and Guide Rails

High-temperature PTFE-thickened grease enables these carriages to operate in temperatures up to 500° F, higher than any other carriage that we offer.

Light Duty Track Roller Carriages and Guide Rails

Nylon rollers provide low-friction movement for light loads and corrosive environments.

Roller Bearing Carriages and Guide Rails

Roller bearing carriages handle heavier loads than ball bearing and track roller carriages.

End Supports for Lead Screws and Ball Screws

Metric End Supports for Lead Screws and Ball Screws

A set of ball bearings reduces friction and secures the end of a metric ball or lead screw.

End Supports for Lead Screws and Ball Screws

A set of ball bearings reduces friction and secures the end of a ball or lead screw.

Air Slides

Rodless Air Slides

With no external moving parts, these air slides provide a long stroke, but have a static footprint—only the carriage on top moves.

Air Slides

Convenient for use with devices such as grippers and printing heads, these air slides have a nonrotating head that provides steady motion and a large mounting area.

Adjustable Stroke Length Air Slides

Modify the stroke length on these air slides to meet changing application requirements—slides have adjustable shaft collars on the guide rods that you can move to fine-tune the stroke length.

Threaded V-Groove Track Rollers

Thread the stud directly into a component or secure with a nut for through-hole mounting.

Linear Motion Shafts

Easy-Access Base-Mounted Shaft Supports

Base-Mounted Shaft Supports

Machinable Easy-Access Base-Mounted Shaft Supports

Flange-Mounted Shaft Supports

Easy-Access Flange-Mounted Shaft Supports

Support-Rail Shafts

Low-Profile Support Rails

Support Rails

Mounted Sleeve Bearings

Dry-Running Mounted Sleeve Bearings

Corrosion-Resistant Dry-RunningMounted Sleeve Bearings

Dry-Running Mounted SleeveBearings for Extreme Misalignment

High-Speed Dry-Running Mounted Sleeve Bearings

Extreme-Temperature Dry-RunningMounted Sleeve Bearings

Oil-Embedded Mounted Sleeve Bearings

Vibration-Damping Oil-EmbeddedMounted Sleeve Bearings

High-Speed Oil-Embedded Mounted Sleeve Bearings

Mounted Sleeve Bearings

Mounted Ball Bearings

Low-Profile Mounted Ball Bearings

Mounted Ball Bearings

Permanently Lubricated Mounted Ball Bearings

Compact-Base Mounted Ball Bearings

Washdown Mounted Ball Bearings

Ultra-Corrosion-Resistant Mounted Ball Bearings

Food Industry Mounted Ball Bearings

Permanently Lubricated WashdownCompact-Base Mounted Ball Bearings

High-Temperature Mounted Ball Bearings

High-Speed Mounted Ball Bearings

Mounted Roller Bearings

Mounted Roller Bearings

Mounted Sleeve Bearings with Two-Bolt Flange

Dry-Running Mounted SleeveBearings with Two-Bolt Flange

Light Duty Dry-Running MountedSleeve Bearings with Two-Bolt Flange

High-Speed Light Duty Dry-Running MountedSleeve Bearings with Two-Bolt Flange

High-Speed Dry-Running MountedSleeve Bearings with Two-Bolt Flange

Extreme-Temperature Dry-Running MountedSleeve Bearings with Two-Bolt Flange

Food Industry Dry-Running MountedSleeve Bearings with Two-Bolt Flange

Oil-Embedded Mounted SleeveBearings with Two-Bolt Flange

Mounted Ball Bearings with Two-Bolt Flange

Mounted Ball Bearings with Two-Bolt Flange

Low-Profile Mounted Ball Bearings with Two-Bolt Flange

Light Duty Mounted Ball Bearings with Two-Bolt Flange

Food Industry Mounted BallBearings with Two-Bolt Flange

High-Temperature Mounted BallBearings with Two-Bolt Flange

Ultra-Corrosion-Resistant MountedBall Bearings with Two-Bolt Flange

Washdown Mounted Ball Bearings with Two-Bolt Flange

High-Speed Mounted BallBearings with Two-Bolt Flange

Permanently Lubricated WashdownMounted Ball Bearings with Two-Bolt Flange

Mounted Roller Bearings with Two-Bolt Flange

Mounted Roller Bearings with Two-Bolt Flange

Mounted Bearings with Four-Bolt Flange

Mounted Ball Bearings with Four-Bolt Flange

Permanently Lubricated WashdownMounted Ball Bearings with Four-Bolt Flange

Food Industry Mounted BallBearings with Four-Bolt Flange

Ultra-Corrosion-Resistant MountedBall Bearings with Four-Bolt Flange

High-Temperature Mounted BallBearings with Four-Bolt Flange

High-Speed Mounted BallBearings with Four-Bolt Flange

Mounted Sleeve Bearings with Four-Bolt Flange

Mounted Roller Bearings with Four-Bolt Flange

Washdown Mounted Ball Bearings with Four-Bolt Flange

Mounted Bearings with Three-Bolt Flange

Mounted Bearings with Three-Bolt Flange

Bearing Housings

Ready-Mount Bearing Housings

Ready-Mount Bearing Housings with Two-Bolt Flange

Bearing Housings

Bearing Housings with Two-Bolt Flange

Mounted Linear Bearings

Mounted Linear Ball Bearings

High-Load Mounted Linear Ball Bearings

Adjustable Mounted Linear Ball Bearings

Corrosion-Resistant Mounted Linear Ball Bearings

Mounted Linear Sleeve Bearings

Sleeve Bearing Blocks for Washdown Environments

High-Speed Mounted Linear Sleeve Bearings

High-Load High-Speed Mounted Linear Sleeve Bearings

High-Load Mounted Linear Sleeve Bearings

Frictionless-Motion Mounted Linear Air Bearings

Corrosion-Resistant Dry-Running
Mounted Sleeve Bearings

Dry-Running Mounted Sleeve
Bearings for Extreme Misalignment

Extreme-Temperature Dry-Running
Mounted Sleeve Bearings

Vibration-Damping Oil-Embedded
Mounted Sleeve Bearings

Permanently Lubricated Washdown
Compact-Base Mounted Ball Bearings

Dry-Running Mounted Sleeve
Bearings with Two-Bolt Flange

Light Duty Dry-Running Mounted
Sleeve Bearings with Two-Bolt Flange

High-Speed Light Duty Dry-Running Mounted
Sleeve Bearings with Two-Bolt Flange

High-Speed Dry-Running Mounted
Sleeve Bearings with Two-Bolt Flange

Extreme-Temperature Dry-Running Mounted
Sleeve Bearings with Two-Bolt Flange

Food Industry Dry-Running Mounted
Sleeve Bearings with Two-Bolt Flange

Oil-Embedded Mounted Sleeve
Bearings with Two-Bolt Flange

Food Industry Mounted Ball
Bearings with Two-Bolt Flange

High-Temperature Mounted Ball
Bearings with Two-Bolt Flange

Ultra-Corrosion-Resistant Mounted
Ball Bearings with Two-Bolt Flange

High-Speed Mounted Ball
Bearings with Two-Bolt Flange

Permanently Lubricated Washdown
Mounted Ball Bearings with Two-Bolt Flange

Permanently Lubricated Washdown
Mounted Ball Bearings with Four-Bolt Flange

Food Industry Mounted Ball
Bearings with Four-Bolt Flange

Ultra-Corrosion-Resistant Mounted
Ball Bearings with Four-Bolt Flange

High-Temperature Mounted Ball
Bearings with Four-Bolt Flange

High-Speed Mounted Ball
Bearings with Four-Bolt Flange

Corrosion-Resistant Flange-Mounted
Linear Ball Bearings

Chemical-Resistant Flange-Mounted
Linear Sleeve Bearings

High-Speed Mounted Linear Sleeve
Bearings for Support Rail Shafts

High-Load High-Speed Mounted Linear
Sleeve Bearings for Support Rail Shafts

High-Load Mounted Linear Ball
Bearings for Support Rail Shafts

Corrosion-Resistant Mounted Linear
Ball Bearings for Support Rail Shafts

Heavy Duty Sleeve Bearing
Carriages for T-Slotted Framing

High-Temperature Sleeve Bearing
Carriages and Guide Rails

Locking Extra-Wide Sleeve
Bearing Carriages and Guide Rails

Side-Mount Sleeve Bearing
Carriages for T-Slotted Framing

Heavy Duty Side-Mount Sleeve Bearing
Carriages for T-Slotted Framing

Locking Sleeve Bearing Carriages
and Guide Rails for Curves

Horizontal-Mount Quiet-Ride Ball
Bearing Carriages and Guide Rails

Corrosion-Resistant Ball Bearing
Carriages and Guide Rails

Horizontal-Mount Ball Bearing
Carriages and Guide Rails

Maintenance-Free Ball Bearing
Carriages and Guide Rails

Corrosion-Resistant Maintenance-Free
Ball Bearing Carriages and Guide Rails

High-Cycle Extra-Wide Ball
Bearing Carriages and Guide Rails

High-Cycle Low-Profile Ball
Bearing Carriages and Guide Rails

Locking High-Load Track Roller
Carriages and Guide Rails

Side-Mount Track Roller
Carriages for T-Slotted Framing

Corrosion-Resistant Side-Mount Track
Roller Carriages and Guide Rails

Light Duty Side-Mount Track
Roller Carriages and Guide Rails

Self-Aligning Side-Mount Track
Roller Carriages and Guide Rails

High-Temperature Track Roller
Carriages and Guide Rails