Ready for turning in your lathe, these rods are precision ground and held to a strict straightness tolerance. Also known as chrome-moly steel, this versatile alloy steel is used for a wide range of parts, such as gears, axles, shafts, collets, and die holders. It resists fracturing from repeated stress. For added wear resistance, you can surface harden these rods with heat treating.

Note: Rods may be made from either 4140 or 4142 alloy steel. They are interchangeable in most applications.

Ready for turning in a lathe, these rods are precision ground and held to a strict straightness tolerance. The lead additive acts as a lubricant, which allows 12L14 carbon steel to withstand very fast machining. It's used to fabricate a wide variety of machine parts, such as shaft couplings, studs, and pins. For added wear resistance, they can be surface hardened with heat treating.

Often called ETD-150, this modified alloy steel is drawn at high temperatures for excellent strength and machinability. Also known as chrome-moly steel, 4140 alloy steel resists fracturing from repeated stress. It is used for a wide range of parts, such as gears, axles, and shafts. These rods have been hardened for added resistance to abrasion and impact.

Note: Rods may be made from either 4140 or 4142 alloy steel. They are interchangeable in most applications.

The best balance of superior wear resistance, precision, and machinability. These 416 stainless steel rods come hardened to increase strength and resist denting and deforming. Precision ground to tight tolerances, they're all set to turn in your lathe.

416 is the easiest type of stainless steel to machine. Alloyed with sulfur, it cuts quickly without clogging your cutting tools. It won't wear down when it grinds against other metal parts, so it's a good choice for gears, screws, and shafts. It also maintains its corrosion resistance in temperatures as hot as 1200° F. However, it's not as corrosion resistant as other types of stainless steel, such as 304 and 17-4 PH.

Ready for turning in a lathe, these rods are precision ground to a tight diameter tolerance. They’re also known as drill rod. Often used for dies, punches, and gauges, O1 tool steel is an oil-hardening material that resists wear and abrasion. It can also be surface hardened with heat treating for added wear resistance.

Machine high-strength parts that require pinpoint precision. Ready to turn in your lathe, these rods come precision ground to tight diameter tolerances.

17-4 PH stainless steel combines the strength of 400 series stainless steel with the corrosion resistance of 300 series. This makes it fit for the most demanding applications—even storing and protecting nuclear waste. You can be confident it will stay corrosion resistant in temperatures as hot as 1100° F. Also known as 630 stainless steel.

Precision ground and held to a strict straightness tolerance, these rods are ready for turning in your lathe. Also known as drill rod, this A2 tool steel is more wear resistant than O1 and keeps a sharper cutting edge. It’s air-hardening, so it doesn’t require baths or quenching after heat treatment. This tool steel is often used for punches, blades, and hammers.

For ultimate precision, strength, and wear resistance, choose these 17-4 PH stainless steel rods. They come hardened, so they're less likely to dent and deform. Precision ground to tight diameter tolerances, they're all set to turn in your lathe.

17-4 PH combines the strength of 400 series stainless steel with the corrosion resistance of 300 series. This makes it fit for the most demanding applications—even storing and protecting nuclear waste. You can be confident it will stay corrosion resistant in temperatures as hot as 1100° F. Also known as 630 stainless steel.