About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron
More
About Plastic
More
High-Strength 1045 Carbon Steel Rods and Discs

Stronger than low-carbon steel with equally good machinability, 1045 carbon steel is widely used for bolts, studs, and shafts.
If you don't see the size you're looking for, please specify a length under additional rod lengths.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 77,000 psi
- Hardness: Rockwell B90 (Medium)
- Heat Treatable: Yes
- Specifications Met: ASTM A108
To Order: Please specify length in increments of 0.25" within the range listed.
Dia. | Dia. Tolerance | Straightness Tolerance | Choose a Length | Per Inch | |
5 3/4" | -0.006" to 0" | 1/8" | 13"-90" | 0000000 | 000000 |
Multipurpose 6061 Aluminum Rods and Discs

- Yield Strength: 35,000 psi
- Hardness:
Foot and inch sizes: Brinell 95 (Soft)
Metric sizes: Brinell 80 (Soft) - Temper: See table
- Fabrication: See table
- Specifications Met:
Cold Worked: ASTM B211
Extruded: ASTM B221
Cold Rolled: ASTM B209
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
If you don't see the size you're looking for, please specify a length under additional rod lengths.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
To Order: Please specify length in increments of 0.25" within the range listed.
Dia. | Dia. Tolerance | Fabrication | Temper | Heat Treatment | Temperature Range, °F | Choose a Length | Per Inch | |
5 3/4" | -0.034" to 0.034" | Extruded | T6511 | Hardened | -320° to 300° | 13"-90" | 0000000 | 000000 |
Wear-Resistant Nylon Rods and Discs


- Color: Off-White or Black
- Max. Temperature: 185° F
- Tensile Strength: 11,200-12,300 psi (Good)
- Impact Strength: 0.6-1.4 ft.-lbs./in. (Poor)
- Hardness: Rockwell R108-R121 (Hard)
- For Use Outdoors: No
- Specifications Met:
Off-White:
1/16" Dia.: ASTM D5989, ASTM D6779, FDA Compliant 21 CFR 177.1500, UL 94 HB
1/8" Dia. and larger: ASTM D5989, ASTM D6779, FDA Compliant 21 CFR 177.1500, UL 94 V-2
Black:
ASTM D5989, ASTM D6779, UL 94 V-2
Often machined into bearings, gears, cams, and valve seats, these wear-resistant nylon 6/6 rods and discs have a slippery surface that reduces friction.
For technical drawings and 3-D models, click on a part number.