About Threaded Studs and Rods
More
High-Strength Grade 5 Titanium Rods and Discs
- Yield Strength: 120,000 psi
- Hardness: Rockwell C30 (Hard)
- Temper Rating: Softened (Annealed)
- Specifications Met: ASTM B348
Grade 5 is the strongest of all the titanium alloys thanks to its higher aluminum and vanadium content. It offers a versatile mix of good corrosion resistance, weldability, and formability. It's often used for turbine blades, fasteners, and spacer rings.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Dia. | Dia. Tolerance | Mechanical Finish | Straightness Tolerance | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/8" | -0.003" to 0.003" | Ground | 1/8" per 5 ft. | 00000000 | |||||
3/16" | -0.003" to 0.003" | Ground | 1/8" per 5 ft. | 00000000 | |||||
1/4" | -0.003" to 0.003" | Ground | 1/8" per 5 ft. | 00000000 | |||||
5/16" | -0.003" to 0.003" | Ground | 1/8" per 5 ft. | 00000000 | |||||
3/8" | -0.003" to 0.003" | Ground | 1/8" per 5 ft. | 00000000 | |||||
1/2" | -0.002" to 0.002" | Ground | 1/8" per 5 ft. | 00000000 | |||||
5/8" | -0.002" to 0.002" | Ground | 1/8" per 5 ft. | 00000000 | |||||
3/4" | -0.002" to 0.002" | Ground | 1/8" per 5 ft. | 00000000 | |||||
7/8" | -0.002" to 0.002" | Ground | 1/8" per 5 ft. | 00000000 | |||||
1" | -0.0025" to 0.0025" | Ground | 1/8" per 5 ft. | 00000000 | |||||
1 1/4" | -0.0025" to 0.0025" | Ground | 1/8" per 5 ft. | 00000000 | |||||
1 1/2" | -0.003" to 0.003" | Ground | 1/8" per 5 ft. | 00000000 | |||||
1 3/4" | -0.003" to 0.003" | Ground | 1/8" per 5 ft. | 00000000 | |||||
2" | -0.003" to 0.003" | Ground | 1/8" per 5 ft. | 00000000 | |||||
2 1/4" | -0.003" to 0.003" | Ground | 1/8" per 5 ft. | 00000000 | |||||
2 1/2" | -0.003" to 0.003" | Ground | 1/8" per 5 ft. | 00000000 |
1/2" Lg. | 1" Lg. | ||||||
---|---|---|---|---|---|---|---|
Dia. | Dia. Tolerance | Mechanical Finish | Straightness Tolerance | Each | Each | ||
2" | -0.003" to 0.003" | Ground | 1/8" per 5 ft. | 000000 | 00 | 000000000 | 000000 |
3" | -0.003" to 0.003" | Ground | 1/8" per 5 ft. | 0000000 | 000000 | 0000000 | 000000 |
3 1/2" | -0.005" to 0.005" | Ground | 1/8" per 5 ft. | 0000000 | 000000 | 0000000 | 000000 |
4" | 0" to 0.062" | Ground | 1/8" per 5 ft. | 0000000 | 000000 | 0000000 | 000000 |
5" | 0" to 0.078" | Ground | 1/8" per 5 ft. | 0000000 | 000000 | 0000000 | 000000 |
Ultra-Corrosion-Resistant Grade 2 Titanium Rods
- Yield Strength: 40,000 psi
- Hardness: Rockwell B65 (Medium)
- Temper Rating: Softened (Annealed)
- Specifications Met: ASTM B348
Because Grade 2 titanium is 99% pure, it is more corrosion resistant than Grades 5 and 9 but not as strong. It has good formability and weldability. Common uses include chemical processing equipment, heat exchangers, and marine hardware.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Dia. | Dia. Tolerance | Straightness Tolerance | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/16" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
1/8" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
3/16" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
1/4" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
5/16" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
3/8" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
7/16" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
1/2" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
5/8" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
3/4" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
7/8" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
1" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
1 1/4" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
1 1/2" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
1 3/4" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
2" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
2 1/4" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
2 1/2" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 |
Ultra-Corrosion-Resistant Grade 2 Titanium Wire
- Temper Rating: Softened (Annealed)
- Tensile Strength: 50,000 psi
- Specifications Met: ASTM B863
Bend this wire and it will stay in place. Because Grade 2 titanium is 99% pure, it is more corrosion resistant than Grades 5 and 9 but not as strong. It has good formability and weldability. Common uses include chemical-processing equipment, heat exchangers, and marine hardware.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
1/8 lb. Coil | 1/4 lb. Coil | |||||||
---|---|---|---|---|---|---|---|---|
Dia. | Dia. Tolerance | Max. Temperature, °F | Lg., ft. | Each | Lg., ft. | Each | ||
Matte | ||||||||
0.025" | -0.003" to 0.003" | 500° | 130 | 00000000 | 0000000 | 260 | 00000000 | 0000000 |
0.031" | -0.003" to 0.003" | 500° | 84 | 00000000 | 00000 | 165 | 00000000 | 000000 |
0.046" | -0.003" to 0.003" | 500° | 38 | 00000000 | 00000 | 76 | 00000000 | 000000 |
0.051" | -0.003" to 0.003" | 500° | 31 | 00000000 | 00000 | 62 | 00000000 | 000000 |
0.08" | -0.003" to 0.003" | 500° | 12 | 00000000 | 00000 | 25 | 00000000 | 000000 |
0.125" | -0.003" to 0.003" | 500° | 6 | 00000000 | 00000 | 12 | 00000000 | 000000 |
Fatigue-Resistant Grade 23 Titanium Rods
- Yield Strength: 120,000 psi
- Hardness: Rockwell C34 (Hard)
- Temper Rating: Softened (Annealed)
- Specifications Met: ASTM B348, ASTM F136, ISO 5832-3
Purer than Grade 5 titanium, these long-lasting rods resist fracturing from use even when cracked. They’re also easier to form into shapes than Grade 5 titanium and lighter in weight than steel. Thanks to their aluminum and vanadium content, these rods are stronger than pure titanium, though they’re not as strong as Grade 5. They won’t rust, even in marine or saltwater environments. All meet ASTM F136 and ISO standards for biomedical use. They also meet ASTM B348 standards for titanium alloys. Grade 23 titanium is also known as 6-4 ELI and Ti-6Al-4V ELI titanium.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Diameter | Diameter Tolerance | Mechanical Finish | Straightness Tolerance | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | |
1/8" | -0.003" to 0.003" | Ground | Not Rated | 0000000 | ||||
3/16" | -0.003" to 0.003" | Ground | Not Rated | 0000000 | ||||
1/4" | -0.003" to 0.003" | Ground | Not Rated | 0000000 | ||||
5/16" | -0.003" to 0.003" | Ground | Not Rated | 0000000 | ||||
7/16" | -0.003" to 0.003" | Ground | Not Rated | 0000000 | ||||
1/2" | -0.003" to 0.003" | Ground | Not Rated | 0000000 | ||||
5/8" | -0.003" to 0.003" | Ground | Not Rated | 0000000 | ||||
3/4" | -0.003" to 0.003" | Ground | Not Rated | 0000000 | ||||
1" | -0.003" to 0.003" | Ground | Not Rated | 0000000 | ||||
1 1/4" | -0.003" to 0.003" | Ground | Not Rated | 0000000 | ||||
1 1/2" | -0.003" to 0.003" | Ground | Not Rated | 0000000 |
Ultra-Corrosion-Resistant Grade 4 Titanium Rods
- Yield Strength: 70,000 psi
- Hardness: Rockwell B100 (Hard)
- Temper Rating: Softened (Annealed)
- Specifications Met: ASTM B348
These titanium rods are the strongest of the commercially pure titanium alloys, Grades 1 through 4, and resist corrosion better than Grade 5 titanium. However, they’re not as strong as Grade 5, and they won’t bend or form as easily as lower grades. Use them in chemical processing and marine environments. Nearly 99% pure, these rods won’t corrode from chlorides or oxidizing acids, such as hydrochloric and sulfuric acids. They also stand up to alkalies, such as hydroxide and ammonia. With more iron and oxygen than lower grade titanium, these rods are lightweight as well as strong. They also withstand impacts at low temperatures.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Diameter | Diameter Tolerance | Straightness Tolerance | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/8" | -0.005" to 0.005" | 1/8" per 5 ft. | 000000 | |||||
3/16" | -0.005" to 0.005" | 1/8" per 5 ft. | 000000 | |||||
1/4" | -0.005" to 0.005" | 1/8" per 5 ft. | 000000 | |||||
3/8" | -0.006" to 0.006" | 1/8" per 5 ft. | 000000 | |||||
1/2" | -0.007" to 0.007" | 1/8" per 5 ft. | 000000 | |||||
3/4" | -0.008" to 0.008" | 1/8" per 5 ft. | 000000 | |||||
1" | -0.009" to 0.009" | 1/8" per 5 ft. | 0000000 |
Easy-to-Weld Grade 9 Titanium
- Yield Strength: 105,000 psi
- Hardness: Not Rated
- Temper Rating: Not Rated
- Fabrication: Stress Relieved
Grade 9 titanium has less aluminum and vanadium than Grade 5, so it's easier to weld but not as strong.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Wall Thick. | OD | OD Tolerance | ID | ID Tolerance | Straightness Tolerance | Specifications Met | 1 ft. Lg. | 3 ft. Lg. | 5 ft. Lg. | |
0.016" | 1/4" | 0" to 0.004" | 0.218" | -0.003" to 0.003" | 0.025" per ft. | SAE AMS4945 | 0000000 | |||
0.019" | 3/8" | 0" to 0.004" | 0.337" | -0.003" to 0.003" | 0.025" per ft. | SAE AMS4945 | 0000000 | |||
0.02" | 1/4" | 0" to 0.004" | 0.21" | -0.003" to 0.003" | 0.025" per ft. | SAE AMS4945 | 0000000 | |||
0.026" | 1/2" | 0" to 0.004" | 0.448" | -0.003" to 0.003" | 0.025" per ft. | SAE AMS4945 | 0000000 | |||
0.028" | 3/8" | 0" to 0.004" | 0.319" | -0.003" to 0.003" | 0.025" per ft. | SAE AMS4945 | 0000000 | |||
0.032" | 5/8" | 0" to 0.004" | 0.561" | -0.003" to 0.003" | 0.025" per ft. | SAE AMS4945 | 0000000 | |||
0.039" | 3/4" | 0" to 0.004" | 0.672" | -0.003" to 0.003" | 0.025" per ft. | SAE AMS4945 | 0000000 | |||
0.051" | 1" | 0" to 0.004" | 0.898" | -0.003" to 0.003" | 0.025" per ft. | SAE AMS4945 | 0000000 |
Dowel Pins
Use dowel pins as pivots, hinges, shafts, jigs, and fixtures to locate or hold parts. For a tight fit, your hole should be equal to or slightly smaller than the diameter shown. Breaking strength is measured as double shear, which is the force required to break a pin into three pieces.
400 nickel pins and grade 2 titanium pins resist salt water and caustic chemicals. Titanium pins are about as strong as steel pins, but 40% lighter. They are not magnetic.
For technical drawings and 3-D models, click on a part number.
Lg. | Dia. Tolerance | Min. Hardness | Breaking Strength | Each | |
1/8" Dia. | |||||
---|---|---|---|---|---|
1/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 000000 |
5/16" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
3/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
5/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
3/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
3/16" Dia. | |||||
3/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
5/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
3/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
1/4" Dia. | |||||
1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
5/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
3/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
1 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
Titanium Threaded Rods
Titanium threaded rods have a high strength-to-weight ratio and are resistant to acids and salt water. They're nonmagnetic.
For technical drawings and 3-D models, click on a part number.
Lg., ft. | Tensile Strength, psi | Hardness | Specifications Met | Each | |
Grade 2 Titanium | |||||
---|---|---|---|---|---|
8-32 | |||||
1 | 50,000 | Rockwell B80 | ASTM B348 | 000000000 | 000000 |
3 | 50,000 | Rockwell B80 | ASTM B348 | 000000000 | 000000 |
10-24 | |||||
1 | 50,000 | Rockwell B80 | ASTM B348 | 000000000 | 00000 |
3 | 50,000 | Rockwell B80 | ASTM B348 | 000000000 | 000000 |
1/4"-20 | |||||
1 | 50,000 | Rockwell B80 | ASTM B348 | 000000000 | 00000 |
3 | 50,000 | Rockwell B80 | ASTM B348 | 000000000 | 000000 |
5/16"-18 | |||||
1 | 50,000 | Rockwell B80 | ASTM B348 | 000000000 | 00000 |
3 | 50,000 | Rockwell B80 | ASTM B348 | 000000000 | 000000 |
3/8"-16 | |||||
1 | 50,000 | Rockwell B80 | ASTM B348 | 000000000 | 00000 |
3 | 50,000 | Rockwell B80 | ASTM B348 | 000000000 | 000000 |