Rectangular Sharpening Stones

Filter by

Stone Shape

Stone Length

Grit

Stone Width

Abrasive Material

Stone Thickness

For Sharpening

Grit Rating

Number of Grits

For Finish

Lubrication

Length

Material

Width

Stone Type

Blade Edge

Color

REACH

RoHS

Overall Length

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Container Type

Stone Color

Handle Material

Performance

143 Products

Sharpening Stones

Quickly sharpen the blades on your tools. Use these sharpening stones with a water-soluble or oil-based lubricant.

Straight Rectangular Stone—For Straight Blade Edges


Single Grit	Two Grit

Three Grit

Two Grit—A different grit on each side enables two-step sharpening with one stone. First sharpen your blade with a lower grit, then sharpen again with a finer (higher) grit until the desired edge is achieved.

Three Grit—Three separate grit surfaces enables multistep sharpening with one stone. First sharpen your blade with a lower grit, then sharpen again with progressively finer (higher) grits until the desired edge is achieved.

Aluminum Oxide—Aluminum oxide cuts more slowly than silicon carbide for finer control. Also known as India stones.

Silicon Carbide—Silicon carbide cuts quickly with light pressure. Also known as Crystolon stones.

Novaculite—Novaculite has extremely fine grains that cut very slowly for the most control over sharpening. Also known as Arkansas stones.

Leather—Use these leather-coated wooden stones to refine blade edges after you’ve sharpened with coarser abrasives. Also known as strops.

Ceramic Alumina Abrasive—Ceramic alumina is extremely hard and wear resistant.

Leather Pouch and Plastic Pouch—Store your stone in a pouch and slip it into your pocket when you're on the go.

Antislip Feet—Keep the stone in place to maintain a steady angle while you sharpen.

	Stone
	Lg.	Wd.	Stone Thickness	Lubrication	Clog Resistance Method	Container Type	Includes	Choose a Grit (For Finish)		Each
Single Grit







				Aluminum Oxide

				3"	7/8"	3/8"	Required	—	Plastic Pouch	—	220 (Smooth)	0000000	000000


				4"	1"	1/4"	Required	Oil Filled	—	—	100 (Smooth) , 240 (Extra Smooth) , 320 (Extra Smooth)	0000000	00000
				4"	1"	1/2"	Required	Oil Filled	—	—	100 (Smooth) , 240 (Extra Smooth) , 320 (Extra Smooth)	0000000	00000
				5"	2"	5/8"	Required	Oil Filled	—	—	240 (Extra Smooth) , 320 (Extra Smooth)	0000000	00000
				6"	2"	1"	Required	Oil Filled	—	—	100 (Smooth) , 240 (Extra Smooth) , 320 (Extra Smooth)	0000000	00000
				8"	2"	1"	Required	Oil Filled	—	—	100 (Smooth) , 240 (Extra Smooth) , 320 (Extra Smooth)	0000000	00000




						Silicon Carbide

						3"	7/8"	3/8"	Required	—	—	—	280 (Extra Smooth)	0000000	0000


						4"	1"	1/4"	Required	Oil Filled	—	—	100 (Smooth) , 150 (Smooth) , 280 (Extra Smooth)	0000000	00000
						4"	1"	1/2"	Required	Oil Filled	—	—	100 (Smooth) , 150 (Smooth) , 280 (Extra Smooth)	0000000	00000
						5"	2"	5/8"	Required	Oil Filled	—	—	150 (Smooth) , 280 (Extra Smooth)	0000000	00000
						6"	2"	1"	Required	Oil Filled	—	—	100 (Smooth) , 150 (Smooth) , 280 (Extra Smooth)	0000000	00000
						8"	2"	1"	Required	Oil Filled	—	—	100 (Smooth) , 150 (Smooth) , 280 (Extra Smooth)	0000000	00000




								Novaculite

								3"	1"	3/8"	Required	—	—	—	600 (Polished)	0000000	00000


								3"	1"	3/8"	Required	—	—	—	800 (Polished)	0000000	00000
								4"	1/2"	3/16"	Required	—	—	—	800 (Polished)	0000000	00000
								4"	1"	3/8"	Required	—	—	—	600 (Polished)	0000000	00000
								4"	1"	3/8"	Required	—	—	—	800 (Polished)	0000000	00000
								4"	2"	3/4"	Required	—	—	—	600 (Polished) , 800 (Polished)	0000000	00000
								6"	2"	3/4"	Required	—	—	—	600 (Polished) , 800 (Polished)	0000000	00000
								8"	2"	3/4"	Required	—	—	—	600 (Polished) , 800 (Polished)	0000000	00000
								10"	2"	3/4"	Required	—	—	—	600 (Polished) , 800 (Polished)	0000000	000000




										Leather

										8"	3"	7/8"	Required	—	—	Antislip Feet Buffing Compound	—	0000000	00000


										Two Grit







	Aluminum Oxide × Aluminum Oxide

	3"												1 1/2"	1/2"	Required	—	Plastic Pouch	—	100 (Smooth) × 320 (Extra Smooth)	000000	00000


	4"	1 3/4"											5/8"	Required	Oil Filled × Oil Filled	—	—	100 (Smooth) × 320 (Extra Smooth)	000000	00000
	6"	2"	1"										Required	Oil Filled × Oil Filled	—	—	100 (Smooth) × 320 (Extra Smooth)	000000	00000
	8"	2"	1"										Required	Oil Filled × Oil Filled	—	—	100 (Smooth) × 320 (Extra Smooth)	000000	00000
	11 1/2"	2 1/2"	1"										Required	Oil Filled × Oil Filled	—	—	100 (Smooth) × 320 (Extra Smooth)	000000	00000




			Aluminum Oxide × Novaculite

			6"										2"	1"	Required	Oil Filled	—	—	100 (Smooth) × 600 (Polished)	0000000	00000




				Silicon Carbide × Aluminum Oxide

				6"	2"									1"	Required	Oil Filled × Oil Filled	—	—	150 (Smooth) × 320 (Extra Smooth)	0000000	00000


				11 1/2"	2 1/2"									1"	Required	Oil Filled × Oil Filled	—	—	150 (Smooth) × 320 (Extra Smooth)	0000000	000000




														Silicon Carbide × Silicon Carbide

														4"	1 3/4"	5/8"	Required	Oil Filled × Oil Filled	—	—	100 (Smooth) × 280 (Extra Smooth)	0000000	00000


						6"								2"	1"	Required	Oil Filled × Oil Filled	—	—	100 (Smooth) × 280 (Extra Smooth)	0000000	00000
						8"	2"							1"	Required	Oil Filled × Oil Filled	—	—	100 (Smooth) × 280 (Extra Smooth)	0000000	00000
						11 1/2"	2 1/2"							1"	Required	Oil Filled × Oil Filled	—	—	100 (Smooth) × 280 (Extra Smooth)	0000000	00000




														Novaculite × Novaculite

														4"	2"	1/2"	Required	—	—	—	400 (Extra Smooth) × 800 (Polished)	0000000	00000


														6"	2"	1/2"	Required	—	—	—	400 (Extra Smooth) × 800 (Polished)	0000000	00000
														8"	2"	1/2"	Required	—	—	—	400 (Extra Smooth) × 800 (Polished)	0000000	000000
														10"	2"	1/2"	Required	—	—	—	400 (Extra Smooth) × 800 (Polished)	0000000	000000




														Ceramic Alumina × Ceramic Alumina

														5"	1"	1/4"	Required	—	Leather Pouch	—	600 (Polished) × 1800 (Polished)	0000000	00000


														Three Grit







														Silicon Carbide × Novaculite × Novaculite

														6"	1 5/8"	1/2"	Required	—	—	1 oz. Oil	150 (Smooth) × 600 (Polished) × 800 (Polished)	0000000	00000

Handheld Diamond Sharpening Stones


Style A	Style B	Style C

Style D	Style E	Style F

Style G	Style K

Hold these stones with one hand to sharpen your blade at any angle. Our hardest and longest-lasting abrasive, diamond quickly sharpens blades of any material. Use these stones dry or with water. Rinse with water to clean.

Full Dimple Coverage


Style A	Style B

Shallow dimples collect debris to prevent clogging the sharpening surface. These stones are a good choice for blade edges with defects that require heavy material removal. They also reduce friction and heat to protect delicate blades while you sharpen.

Styles A and B—Fold the sharpening end into the handle for compact storage.

		Stone
	Grit (For Finish)	Lg.	Wd.	Lubrication	Overall Lg.	Handle Material		Each
Style A—Straight Rectangular Stone for Straight Blade Edges







				Single Grit

				220 (Smooth)	2 5/8"	7/8"	Not Required	6"	Plastic	0000000	000000


				240 (Extra Smooth)	2 5/8"	7/8"	Not Required	6"	Plastic	0000000	00000
				360 (Extra Smooth)	2 5/8"	7/8"	Not Required	6"	Plastic	0000000	00000
				800 (Polished)	2 5/8"	7/8"	Not Required	6"	Plastic	0000000	00000


				Style B—Straight Rectangular Stone for Straight Blade Edges







								Single Grit

								220 (Smooth)	4 3/8"	7/8"	Not Required	9 1/2"	Plastic	0000000	00000


								240 (Extra Smooth)	4 3/8"	7/8"	Not Required	9 1/2"	Plastic	0000000	00000
								360 (Extra Smooth)	4 3/8"	7/8"	Not Required	9 1/2"	Plastic	0000000	00000
								800 (Polished)	4 3/8"	7/8"	Not Required	9 1/2"	Plastic	0000000	00000




										Two Grit

										220 (Smooth) × 240 (Extra Smooth)	4 3/8"	7/8"	Not Required	9 1/2"	Plastic	0000000	00000


										240 (Extra Smooth) × 360 (Extra Smooth)	4 3/8"	7/8"	Not Required	9 1/2"	Plastic	0000000	00000
										360 (Extra Smooth) × 800 (Polished)	4 3/8"	7/8"	Not Required	9 1/2"	Plastic	0000000	00000

Without Dimples


Style C	Style D	Style E

Style F	Style G	Style K

The dimple-free surface sharpens blades evenly every time. Since these stones have the most abrasive, they also remove material more quickly. However, debris can build up rapidly, so you’ll need to wipe them clean more often.

Styles C and K—Fold the sharpening end into the handle for compact storage.

		Stone
	Grit (For Finish)	Lg.	Wd.	Lubrication	Overall Lg.	Handle Material		Each
Style C—Straight Rectangular Stone for Straight Blade Edges







				Two Grit

				280 (Extra Smooth) × 600 (Polished)	3 5/8"	3/4"	Not Required	9"	Plastic	00000000	000000


				Style D—Straight Rectangular Stone for Straight Blade Edges







								Single Grit

								150 (Smooth)	2"	3/4"	Not Required	6"	Plastic	00000000	00000


								240 (Extra Smooth)	2"	3/4"	Not Required	6"	Plastic	00000000	00000
								400 (Extra Smooth)	2"	3/4"	Not Required	6"	Plastic	00000000	0000
								600 (Polished)	2"	3/4"	Not Required	6"	Plastic	00000000	0000
								1200 (Polished)	2"	3/4"	Not Required	6"	Plastic	00000000	0000


								Style E—Straight Rectangular Stone for Straight Blade Edges







												Single Grit

												100 (Smooth)	1"	3/8"	Not Required	5"	Aluminum	0000000	00000


												150 (Smooth)	1"	3/8"	Not Required	5"	Aluminum	0000000	00000
												220 (Smooth)	1"	3/8"	Not Required	5"	Aluminum	0000000	00000
												320 (Extra Smooth)	1"	3/8"	Not Required	5"	Aluminum	0000000	00000
												400 (Extra Smooth)	1"	3/8"	Not Required	5"	Aluminum	0000000	00000


												Style F—Straight Rectangular Stone for Straight Blade Edges







																Two Grit

																100 (Smooth) × 320 (Extra Smooth)	1"	3/8"	Not Required	5"	Aluminum	0000000	00000


																150 (Smooth) × 320 (Extra Smooth)	1"	3/8"	Not Required	5"	Aluminum	0000000	00000
220 (Smooth) × 320 (Extra Smooth)																1"	3/8"	Not Required	5"	Aluminum	0000000	00000
320 (Extra Smooth) × 400 (Extra Smooth)	1"															3/8"	Not Required	5"	Aluminum	0000000	00000
320 (Extra Smooth) × 600 (Polished)	1"															3/8"	Not Required	5"	Aluminum	0000000	00000


Style G—Straight Rectangular Stone For Straight Blade Edges







																Single Grit

				150 (Smooth)	3 1/4"											2"	Not Required	3 1/4"	—	00000000	00000


				240 (Extra Smooth)	3 1/4"											2"	Not Required	3 1/4"	—	00000000	00000
				400 (Extra Smooth)	3 1/4"	2"										Not Required	3 1/4"	—	00000000	00000
				600 (Polished)	3 1/4"	2"	Not Required									3 1/4"	—	00000000	00000
				1200 (Polished)	3 1/4"	2"	Not Required									3 1/4"	—	00000000	00000


				Style K—Tapered Rectangular Stone for Straight Blade Edges







																Single Grit

								220 (Smooth)	4 1/2"							1/4" to 3/4"	Not Required	9 1/2"	Plastic	0000000	00000


								360 (Extra Smooth)	4 1/2"							1/4" to 3/4"	Not Required	9 1/2"	Plastic	0000000	00000

Diamond Sharpening Stones

Sharpen blades of any material with the hardest and longest-lasting abrasive we offer. The diamond surface keeps its shape and finish without lubricants, so you can use these stones dry or with water. Rinse with water to clean.

Full Dimple Coverage

Leather Pouch—Store your stone in a pouch and slip it into your pocket when you're on the go.

Antislip Feet and Antislip Mat—Keep the stone in place to maintain a steady angle while you sharpen.

		Stone
	Grit (For Finish)	Lg.	Wd.	Lubrication	Overall Lg.	Container Type	Includes		Each
Straight Rectangular Stone—For Straight Blade Edges







				Single Grit

				100 (Smooth)	4 1/4"	7/8"	Not Required	4 1/4"	Leather Pouch	—	0000000	000000


				220 (Smooth)	4 1/4"	7/8"	Not Required	4 1/4"	Leather Pouch	—	0000000	00000
				220 (Smooth)	6"	2"	Not Required	6"	Wood Box	Antislip Feet	0000000	00000
				240 (Extra Smooth)	4 1/4"	7/8"	Not Required	4 1/4"	Leather Pouch	—	0000000	00000
				240 (Extra Smooth)	6"	2"	Not Required	6"	Wood Box	Antislip Feet	0000000	00000
				360 (Extra Smooth)	4 1/4"	7/8"	Not Required	4 1/4"	Leather Pouch	—	0000000	00000
				360 (Extra Smooth)	6"	2"	Not Required	6"	Wood Box	Antislip Feet	0000000	00000
				800 (Polished)	4 1/4"	7/8"	Not Required	4 1/4"	Leather Pouch	—	0000000	00000
				800 (Polished)	6"	2"	Not Required	6"	Wood Box	Antislip Feet	0000000	00000




						Two Grit

						220 (Smooth) × 240 (Extra Smooth)	8"	2 5/8"	Not Required	8"	—	Antislip Mat	0000000	000000


						220 (Smooth) × 240 (Extra Smooth)	8"	2 5/8"	Not Required	12"	—	Antislip Feet Stone Holder	0000000	000000
						220 (Smooth) × 240 (Extra Smooth)	10"	4"	Not Required	12"	—	Antislip Feet Stone Holder	0000000	000000
						240 (Extra Smooth) × 360 (Extra Smooth)	8"	2 5/8"	Not Required	8"	—	Antislip Mat	0000000	000000
						240 (Extra Smooth) × 360 (Extra Smooth)	8"	2 5/8"	Not Required	12"	—	Antislip Feet Stone Holder	0000000	000000
						240 (Extra Smooth) × 360 (Extra Smooth)	10"	4"	Not Required	12"	—	Antislip Feet Stone Holder	0000000	000000
						240 (Extra Smooth) × 800 (Polished)	8"	2 5/8"	Not Required	12"	—	Antislip Feet Stone Holder	0000000	000000
						240 (Extra Smooth) × 800 (Polished)	10"	4"	Not Required	12"	—	Antislip Feet Stone Holder	0000000	000000
						360 (Extra Smooth) × 800 (Polished)	8"	2 5/8"	Not Required	12"	—	Antislip Feet Stone Holder	0000000	000000
						360 (Extra Smooth) × 800 (Polished)	10"	4"	Not Required	12"	—	Antislip Feet Stone Holder	0000000	000000

Partial Dimple Coverage

Straight

Rectangular Stone

Single Grit

These stones have dimples along most of their surface and a small section of continuous abrasive. Start with the dimpled portion to remove material from your blade edge without clogging the stone. Use the abrasive for the final stroke to create an even finish.

Leather Pouch—Store your stone in a pouch and slip it into your pocket when you're on the go.

		Stone
	Grit (For Finish)	Lg.	Wd.	Lubrication	Overall Lg.	Container Type		Each
Straight Rectangular Stone—For Straight Blade Edges







				Single Grit

				240 (Extra Smooth)	4 1/4"	7/8"	Not Required	4 1/4"	Leather Pouch	0000000	000000


				600 (Polished)	4 1/4"	7/8"	Not Required	4 1/4"	Leather Pouch	0000000	00000
				1200 (Polished)	4 1/4"	7/8"	Not Required	4 1/4"	Leather Pouch	0000000	00000

Without Dimples


Straight Rectangular Stone Single Grit	Straight Rectangular Stone Two Grit

Straight Rectangular Stone with Groove Single Grit

Leather Pouch—Store your stone in a pouch and slip it into your pocket when you're on the go.

Antislip Feet and Antislip Mat—Keep the stone in place to maintain a steady angle while you sharpen.

		Stone
	Grit (For Finish)	Lg.	Wd.	Lubrication	Overall Lg.	Container Type	Includes		Each
Straight Rectangular Stone—For Straight Blade Edges







				Single Grit

				100 (Smooth)	8"	3"	Not Required	8"	—	Antislip Feet	0000000	0000000


				180 (Smooth)	6"	2"	Not Required	6"	—	Antislip Feet	0000000	00000
				180 (Smooth)	8"	3"	Not Required	8"	—	Antislip Feet	0000000	00000
				180 (Smooth)	11 1/2"	2 1/2"	Not Required	11 1/2"	—	Antislip Feet	0000000	00000
				240 (Extra Smooth)	6"	2"	Not Required	6"	—	Antislip Feet	0000000	00000
				240 (Extra Smooth)	8"	3"	Not Required	8"	—	Antislip Feet	0000000	00000
				240 (Extra Smooth)	11 1/2"	2 1/2"	Not Required	11 1/2"	—	Antislip Feet	0000000	00000
				320 (Extra Smooth)	6"	2"	Not Required	6"	—	Antislip Feet	0000000	00000
				320 (Extra Smooth)	8"	3"	Not Required	8"	—	Antislip Feet	0000000	00000
				320 (Extra Smooth)	11 1/2"	2 1/2"	Not Required	11 1/2"	—	Antislip Feet	0000000	00000
				600 (Polished)	6"	2"	Not Required	6"	—	Antislip Feet	0000000	00000


				600 (Polished)	8"	3"	Not Required	8"	—	Antislip Feet	0000000	00000
				600 (Polished)	11 1/2"	2 1/2"	Not Required	11 1/2"	—	Antislip Feet	0000000	000000




						Two Grit

						180 (Smooth) × 240 (Extra Smooth)	8"	3"	Not Required	8"	—	Antislip Mat	0000000	00000


						180 (Smooth) × 240 (Extra Smooth)	11"	2 1/2"	Not Required	11"	—	Antislip Mat	0000000	000000
						240 (Extra Smooth) × 320 (Extra Smooth)	11"	2 1/2"	Not Required	11"	—	Antislip Mat	0000000	000000
						240 (Extra Smooth) × 600 (Polished)	6"	2"	Not Required	8"	—	Antislip Mat	0000000	00000
						320 (Extra Smooth) × 600 (Polished)	11"	2 1/2"	Not Required	11"	—	Antislip Mat	0000000	000000
						400 (Extra Smooth) × 1200 (Polished)	8"	3"	Not Required	10"	—	Antislip Mat	0000000	00000
						600 (Polished) × 1200 (Polished)	6"	2"	Not Required	8"	—	Antislip Mat	0000000	00000
						600 (Polished) × 1200 (Polished)	8"	3"	Not Required	10"	—	Antislip Mat	0000000	00000


						Straight Rectangular Stone with Groove—For Straight and Pointed Blade Edges







										Single Grit

										600 (Polished)	3"	1"	Not Required	3"	Leather Pouch	—	0000000	00000

Handheld Sharpening Stones

Grip by hand and sharpen tools at the angle you need.

Straight Rectangular Stone—For Straight Blade Edges

Silicon Carbide—Silicon carbide cuts quickly with light pressure. Also known as Crystolon stones.

Boron Carbide—Boron carbide lasts up to 10 times longer than silicon carbide.

Suede Leather × Leather—Also known as strops, these leather-coated wooden stones create a razor-sharp, polished blade edge after you sharpen with other abrasives. First, sharpen with the suede leather side to remove any remaining microscopic burrs. Next, sharpen with the smooth leather side to refine the edge.

	Stone							Magnifier Location
	Lg.	Wd.	Stone Thickness	Stone Color	Lubrication	Overall Lg.	Handle Material	Magnification	Magnifier Location	Includes	Choose a Grit (For Finish)		Each
Single Grit







				Silicon Carbide

				10"	1 1/4"	3/4"	Dark Gray	Required	14 3/4"	Wood	—	—	—	150 (Smooth)	0000000	000000




						Boron Carbide

						1 5/8"	1/2"	1/8"	Dark Gray	Required	7"	Plastic	2X	Handle	—	240 (Extra Smooth) , 320 (Extra Smooth) , 400 (Extra Smooth)	000000	00000


						Two Grit







										Silicon Carbide × Silicon Carbide

										10"	1 1/4"	3/4"	Dark Gray × Dark Gray	Required	14 3/4"	Wood	—	—	—	100 (Smooth) × 280 (Extra Smooth)	0000000	00000




												Suede Leather × Leather

												8 1/2"	2 1/2"	7/8"	Brown × Brown	Required	13 1/4"	Wood	—	—	Angle Guide Buffing Compound	—	0000000	00000

Tapered Rectangular Stone—For Straight Blade Edges

Silicon Carbide—Silicon carbide cuts quickly with light pressure. Also known as Crystolon stones.

	Stone
	Lg.	Wd.	Stone Thickness	Grit (For Finish)	Stone Color	Lubrication	Overall Lg.	Handle Material		Each
Single Grit







				Silicon Carbide

				10"	1 1/4"	3/4"	100 (Smooth)	Dark Gray	Required	14"	Wood	0000000	000000

Curved Rectangular Stone—For Curved Blade Edges

Image of Product. Front orientation. Sharpening Stones. Handheld Sharpening Stones, Curved, Rectangular Stone.

Aluminum Oxide—Aluminum oxide cuts more slowly than silicon carbide for finer control. Also known as India stones.

Silicon Carbide—Silicon carbide cuts quickly with light pressure. Also known as Crystolon stones.

	Stone
	Lg.	Wd.	Stone Thickness	Grit (For Finish)	Stone Color	Lubrication	Overall Lg.		Each
Single Grit







				Aluminum Oxide

				9"	2 3/8"	1 1/2"	60 (Rough)	White	Required	9"	0000000	000000


				9"	2 3/8"	1 1/2"	120 (Smooth)	Orange	Required	9"	0000000	00000




						Silicon Carbide

						9"	2 3/8"	1 1/2"	80 (Rough)	Green	Required	9"	0000000	00000

Sharpening Stones with Oil Reservoir

Rotate the stone to use three different grit surfaces. The reservoir in the base keeps them clean and oiled. First sharpen your blade with a lower grit, then sharpen again with progressively finer (higher) grits until the desired edge is achieved.

Straight Rectangular Stone—For Straight Blade Edges

Image of Product. Front orientation. Sharpening Stones. Sharpening Stones with Oil Reservoir, Straight, Rectangular Stone.

Silicon Carbide Abrasive—Silicon carbide cuts quickly with light pressure. Also known as Crystolon stones.

	Sharpening Stones									Repl. 100 Grit Sharpening Stones		Repl. 150 Grit Sharpening Stones		Repl. 320 Grit Sharpening Stones
	Stone
	Lg.	Wd.	Stone Thickness	Grit (For Finish)	Lubrication	Features	Includes		Each		Each		Each		Each
Three Grit







				Silicon Carbide × Silicon Carbide × Aluminum Oxide

				6"	2"	1/2"	100 (Smooth) × 150 (Smooth) × 320 (Extra Smooth)	Required	Oil Reservoir	4 oz. Oil	000000	0000000	0000000	000000	0000000	000000	0000000	000000


				11 1/2"	2 1/2"	1/2"	100 (Smooth) × 150 (Smooth) × 320 (Extra Smooth)	Required	Oil Reservoir	16 oz. Oil	000000	000000	000000	00000	000000	00000	000000	00000

Water-Activated Sharpening Stones

Sharpen cutting edges faster and with less pressure than standard stones. Instead of applying a lubricant, add a few splashes of water to form an abrasive slurry. The slurry removes imperfections efficiently, exposing fresh grit as it forms.

For duller blades, sharpen with multiple stones, moving from coarser to finer grits. Use 220 grit to smooth away damage, 500 grit for the initial pass, 1200 grit for polishing, and 1400 grit for an ultra-fine, mirror-like finish.

Add a mat to catch the slurry and keep your work area clean.

Straight Rectangular Stone—For Straight Blade Edges


Single Grit	Two Grit

Silicon Carbide—Silicon carbide cuts quickly with light pressure. Also known as Crystolon stones.

	Stone
	Lg.	Wd.	Stone Thickness	Grit (For Finish)	Lubrication	Container Type		Each
Single Grit







				Silicon Carbide

				8"	3"	1"	220 (Smooth)	Not Required	Plastic Case	0000000	000000


				8"	3"	1"	500 (Polished)	Not Required	Plastic Case	0000000	00000
				8"	3"	1"	1200 (Polished)	Not Required	Plastic Case	0000000	000000
				8"	3"	1"	1400 (Polished)	Not Required	Plastic Case	0000000	000000


				Two Grit







								Silicon Carbide × Silicon Carbide

								8"	3"	1"	220 (Smooth) × 500 (Polished)	Not Required	Plastic Case	0000000	00000


								8"	3"	1"	500 (Polished) × 1200 (Polished)	Not Required	Plastic Case	0000000	000000
								8"	3"	1"	1200 (Polished) × 1400 (Polished)	Not Required	Plastic Case	0000000	000000

Sharpening Stone Truing Tools

Flatten sharpening stones after use with these tools. Diagonal grooves let debris escape so it doesn’t interfere with flattening.

Abrasive Material	Lg.	Wd.	Thk.	Lubrication	Container Type		Each
Silicon Carbide	9"	3"	3/4"	Not Required	Plastic Case	00000000	000000

Blade Sharpener Guides

4 Sharpening Angles

4 Sharpening

Angles

Strike your sharpening stone with your blade at the correct angle for a razor-sharp edge—every time. These guides include multiple angle options. Use a lower angle for a sharper blade and a higher angle for a more durable blade.

4 Sharpening Angles—A magnetic base secures these guides directly to your sharpening stone. The four-sided base offers four different sharpening angles. Press your blade against the guide as you strike the stone to maintain the angle.

No. of Sharpening Angles	Sharpening Angle	Wd.	Lg.	Ht.	For Blade Edge	Material	Mount Type		Each
4	15°, 20°, 22°, 26°	2 5/8"	4 3/8"	1/8"	Straight	Plastic	Magnetic	0000000	00000