Hand-Held Sheet Metal Benders for Making Corners
Fold corners in flat metal sheets to create your own bin boxes, drip pans, and other three-dimensional objects. Similar to tucking the corners of a bedsheet, these benders twist and wrap the metal into triangle-shaped folds to form corners. Finish the fold by creasing it with a regular hand-held sheet metal bender.
Style A benders have a longer throat depth for making deeper corners. They create corners in any angle.
Style B benders form precise 45° or 90° corners. They have a finger hole for additional gripping options.
Combination Sheet Metal Shears, Benders, and Curvers
Save space in your shop by cutting, bending, and curving sheet metal with a single machine. Also known as shear brake rolls. Use the blade on the shear to make clean, straight cuts; it has two cutting edges for twice the life. A press brake makes bends up to 90°. Create curves and circles with the slip roll.
When using the shear or press brake, set the manual back gauge to precisely position the sheet metal for consistent cuts or bends.
Max. Bending | For Max. Thick. | Roller | Mounting Holes | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Angle | Aluminum | Brass | Copper | Stainless Steel | Steel | Min. Bending Radius | Cut Lg. | Ht. | Wd. | Dp. | Dia. | No. of | Blade Material | Mounting Fasteners Included | No. of | Dia. | Each | |
For Aluminum, Brass, Copper, Stainless Steel, Steel | |||||||||||||||||||
12" | 90° | 1/32" | 1/32" | 1/32" | 1/64" | 1/32" | 3/4" | 12" | 15" | 14" | 11" | 1 1/2" | 3 | Steel | No | 4 | 0.32" | 0000000 | 0000000 |
30" | 90° | 3/64" | 1/32" | 1/32" | 1/64" | 1/32" | 3/4" | 30" | 23" | 32 1/2" | 14 1/2" | 1 1/2" | 3 | Steel | No | 4 | 0.32" | 0000000 | 00000000 |
40" | 90° | 3/64" | 1/32" | 1/32" | 1/64" | 1/32" | 7/8" | 40" | 23" | 42 1/2" | 14 1/2" | 1 5/8" | 3 | Steel | No | 4 | 0.32" | 0000000 | 00000000 |
Hand-Held Sheet Metal Benders for Long Folds
Create long, uniform folds on the edges of sheet metal. Insert the end of a sheet into either side of these tools to form 3/8" or 1" deep folds.
Hand-Held Sheet Metal Benders for Opening Seams
Open sheet metal seams without cutting. The jaws slide under seams to pry the sheets apart. Because you’ve unfolded the sheet metal instead of cutting it, you can reuse both panels.
Jaw Wd. | Lg. | Material | Each | |
For Aluminum, Brass, Copper, Stainless Steel, Steel | ||||
---|---|---|---|---|
1 1/4" | 10" | Steel | 0000000 | 0000000 |
Hand-Held Sheet Metal Edge Shapers
With a single tool, create both sharp creases and soft curves along the edges of sheet metal. Also known as edge rollers, these tools slide back and forth along edges to create even bends. Unlike benchtop sheet metal tools, these shapers are portable, so they’re often used on-site by roofers. Use 1/8” markings to set up precise bends.
Throat Dp. | For Max. Steel Thick. | Max. Bending Angle | Graduation Marks | Numeric Increments | Lg. | Material | Each | |
For Aluminum, Stainless Steel, Steel | ||||||||
---|---|---|---|---|---|---|---|---|
3/8"-8" | 1/32" | 90° | 8ths | 1" | 13 1/2" | Steel | 0000000 | 0000000 |
Tight-Grip Sheet Metal Benders and Crimpers
These tools lock onto your material to prevent them from opening while bending and crimping.
Throat Dp. | Jaw Wd. | Lg. | Material | Each | |
1 3/4" | 3 1/8" | 8" | Steel | 0000000 | 000000 |
Depth-Measuring Sheet Metal Benders and Crimpers
The jaws have V-notches in 1/4" increments to measure the depth of bends.
Throat Dp. | Notch Increments | Jaw Wd. | Lg. | Material | Each | |
1 1/4" | 1/4", 1/2", 3/4", 1", 1 1/4" | 3 1/4" | 8" | Steel | 0000000 | 000000 |
Depth-Measuring Sheet Metal Benders and Crimpers for Tight Spaces
Offset handles allow you to use this tool in tight spaces. The jaws have V-notches in 1/4" increments to measure the depth of bends.
Throat Dp. | Notch Increments | Jaw Wd. | Lg. | Material | Each | |
1 1/4" | 1/4", 1/2", 3/4", 1", 1 1/4" | 3 1/4" | 9" | Steel | 0000000 | 000000 |
Sheet Metal Edge Shapers
Make different edge styles on your sheet metal. It comes with rollers for turning, wiring, burring, beading, and crimping.
Roller | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Throat Dp. | Ht. | Wd. | Dp. | For Max. Steel Thick. | Mount Type | Max. Mounting Surface Thick. | Material | Ctr.-to-Ctr. | Material | Includes | Each | |
7" | 35" | 15 3/8" | 21 1/8" | 1/64" | C-Clamp | 2 3/4" | Steel | 2" | Cast Iron | Rollers for Burring, Crimping, Wiring, 1/8" Turning, and 3/4" Ogee Bending | 0000000 | 000000000 |
Duct Crimpers for Impact Drivers
Turn your impact driver into a power crimper, and create raised edges on sheet metal more quickly than hand crimpers. Use on standard 30-24 ga. galvanized steel HVAC ductwork. They work with impact drivers in forward or reverse, so they are comfortable for both right- and left-handed users.
For Impact Driver | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Throat Dp. | Jaw Wd. | Lg. | For Steel Gauge | For Crimp Dp. | Hex Shank Size | Max. Current, A | Min. Voltage | Material | Each | |
1 1/2" | 2" | 4" | 30-24 | 1 1/2" | 1/4" | 7 | 12V DC | Steel | 0000000 | 0000000 |
Tear-Preventing Sheet Metal Benders and Crimpers
Rounded jaws reduce damage to aluminum and other lightweight metal.
Throat Dp. | Jaw Wd. | Lg. | Material | Each | |
1" | 3 1/2" | 8" | Steel | 0000000 | 000000 |
High-Force Sheet Metal Crimpers
This tool has five blades and compound-leverage action for more power with less effort than other crimpers. Use it to join pieces of metal duct and gutters. Jaws have V-notches in 1/4" increments to measure the depth of bends.
Throat Dp. | Notch Increments | Jaw Wd. | Lg. | Material | Each | |
1 1/4" | 1/4", 1/2", 3/4", 1", 1 1/4" | 7/8" | 9 3/4" | Steel | 0000000 | 000000 |