Filter by
Drive Style
Tip Type
Material
Rounded Head Style
Oval Head Profile
Threading
System of Measurement
For Use In
Rounded Head Profile
Export Control Classification Number (ECCN)
DFARS Specialty Metals
REACH
RoHS
Maximum Drilling Thickness
Shank Cross Section
Tapping Method
About Tapping Screws
More
One-Way Rounded Head Screws for Sheet Metal
The S-shaped drive can be installed with a standard slotted driver, but requires a special tool for removal. Made from 18-8 stainless steel, these screws are chemical resistant and may be mildly magnetic. They penetrate 0.025" and thinner sheet metal. Length is measured from under the head.
Head | |||||||
|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Drill Bit Size | Approximate Threads per Inch | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel  | |||||||
No. 6 | |||||||
| 1/2" | 0.26" | 0.103" | No. 32 | 18 | 100 | 000000000 | 000000 |
| 3/4" | 0.26" | 0.103" | No. 32 | 18 | 100 | 000000000 | 00000 |
| 1" | 0.26" | 0.103" | No. 32 | 18 | 50 | 000000000 | 00000 |
No. 8 | |||||||
| 1/2" | 0.309" | 0.12" | No. 29 | 15 | 50 | 000000000 | 00000 |
| 3/4" | 0.309" | 0.12" | No. 29 | 15 | 50 | 000000000 | 00000 |
| 1" | 0.309" | 0.12" | No. 29 | 15 | 50 | 000000000 | 00000 |
| 1 1/4" | 0.309" | 0.12" | No. 29 | 15 | 50 | 000000000 | 00000 |
| 1 1/2" | 0.309" | 0.12" | No. 29 | 15 | 50 | 000000000 | 0000 |
No. 10 | |||||||
| 1/2" | 0.359" | 0.137" | No. 21 | 12 | 50 | 000000000 | 00000 |
| 3/4" | 0.359" | 0.137" | No. 21 | 12 | 50 | 000000000 | 00000 |
| 1" | 0.359" | 0.137" | No. 21 | 12 | 50 | 000000000 | 00000 |
| 1 1/2" | 0.359" | 0.137" | No. 21 | 12 | 50 | 000000000 | 00000 |
| 2" | 0.359" | 0.137" | No. 21 | 12 | 25 | 000000000 | 00000 |
No. 12 | |||||||
| 1/2" | 0.425" | 1/8" | 3/16" | 11 | 50 | 000000000 | 00000 |
| 1" | 0.425" | 1/8" | 3/16" | 11 | 25 | 000000000 | 0000 |
| 1 1/2" | 0.425" | 1/8" | 3/16" | 11 | 25 | 000000000 | 00000 |
| 2" | 0.425" | 1/8" | 3/16" | 11 | 25 | 000000000 | 00000 |
No. 14 | |||||||
| 1/2" | 0.472" | 0.175" | 5.5 mm | 10 | 50 | 000000000 | 00000 |
| 3/4" | 0.472" | 0.175" | 5.5 mm | 10 | 25 | 000000000 | 00000 |
| 1" | 0.472" | 0.175" | 5.5 mm | 10 | 25 | 000000000 | 00000 |
| 1 1/2" | 0.472" | 0.175" | 5.5 mm | 10 | 25 | 000000000 | 00000 |
| 2" | 0.472" | 0.175" | 5.5 mm | 10 | 25 | 000000000 | 00000 |
| 3" | 0.472" | 0.175" | 5.5 mm | 10 | 10 | 000000000 | 00000 |
One-Way Oval Head Screws for Sheet Metal
The S-shaped drive can be installed with a standard slotted driver, but requires a special tool for removal. Made from 18-8 stainless steel, they are chemical resistant and may be mildly magnetic. Screws penetrate 0.025" and thinner sheet metal. Length is measured from under the head.