With a single tool, create both sharp creases and soft curves along the edges of sheet metal. Also known as edge rollers, these tools slide back and forth along edges to create even bends. Unlike benchtop sheet metal tools, these bead rollers are portable, so they’re often used on-site by roofers. Use 1/8” markings to set up precise bends.

Shape sheet metal using your bench vise as a sturdy base. Remove or slide the four dies along the clamping bar to form angles, channels, boxes, trays, and pans in a variety of widths. Unlike bench-top and floor-mount benders, these are not permanently mounted—pull them out when you need them and store them when you don’t.

Make deep folds in roofing panels and other large pieces of sheet metal. Set the throat depth up to 19 _5/8". Unlike bench-mount benders, these lightweight benders are easily moved from place to place.

Make different edge styles on your sheet metal. It comes with rollers for turning, wiring, burring, beading, and crimping.

Make bends up to 135° in metal sheets. Benders have a clearance of 4" for insertion and removal of large workpieces such as vehicle panels and duct work. They attach to your bench top and have a removable front edge to make bends that are close together.

Turn your impact driver into a power crimper, and create raised edges on sheet metal more quickly than with hand crimpers. Use on standard 30-24 ga. galvanized steel HVAC ductwork. They work with impact drivers in forward or reverse, so they are comfortable for both right- and left-handed users.

Make bends up to 90° in metal sheets to form items such as boxes and trays. Benders attach to your bench top and have a brake bar that adjusts for different stock thicknesses and bend angles.

Save space in your shop by cutting, bending, and curving sheet metal with a single machine. Also known as shear brake rolls. Use the blade on the shear to make clean, straight cuts; it has two cutting edges for twice the life. A press brake makes bends up to 90°. Create curves and circles with the slip roll.

When using the shear or press brake, set the manual back gauge to precisely position the sheet metal for consistent cuts or bends.

Reinforced construction lets this bender handle thicker material than the bench-top model. Position the movable forming dies, also known as fingers, to make boxes, trays, and pans in different widths. An adjustable upper leaf and nose bar allow for radius bending.

Position the movable forming dies, also known as fingers, to make boxes, trays, and pans in different widths. An adjustable upper leaf and nose bar allow for radius bending.