Stay visible—even in dim light—and shielded from flames and arc flash hazards. These shirts meet NFPA 70E and NFPA 2112 standards for protecting your torso and arms against flash fire and electrical arc flashes. Choose shirts that meet the arc rated category required by your workplace. These shirts are rated Category 2, the most common rating for industrial applications. Bright in color and decked out with reflective strips, these shirts meet Class 3 ANSI/ISEA 107 to make you visible from a _¼ mile away. Use them around moving vehicles, on busy shop floors, and when operating machinery.

Made of cotton/nylon blend, these shirts are breathable and moisture wicking, so you won’t get too hot. They have concealed mesh vents on the back that let air in and keep you cool as you move.

When measuring chest size, measure around the fullest part of your chest.

These sweatshirts meet NFPA 70E and NFPA 2112 standards to protect your upper body against electrical arc flashes and flames. With a rib knit waistband and cuffs that stretch for a snug fit, these sweatshirts shield your skin from hazards. The zipper is covered to create a barrier against flames. Choose a sweatshirt that meets the arc rated PPE category required by your workplace. The higher the arc rating, the greater the flame resistance. These sweatshirts are rated Category 2, the most common protection rating for standard industrial applications.

Made of blended fleece, they’re comfortable and keep you warm.

Bib overalls have adjustable suspenders to modify the length.

When measuring chest size, measure around the fullest part of your chest. Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these suits.

Withstand flash fire for up to 8 seconds—the clothes in these kits can protect you for twice as long as most flame-resistant clothing. Made of rayon/aramid, the coveralls and mask absorb moisture to keep you cool and comfortable.

The coveralls have a 10 ft. Kevlar strap, so nearby teammates can pull you to safety without putting themselves at risk if there’s a fire. The reflective stripes keep you easy to see where there's low visibility. The zipper closure on the front is covered by a hook-and-loop flap so it doesn't scrape equipment or get hot. The legs have zippers on the sides as well, so you can fit them over bulky boots. Tighten the hook and loop straps on the bottom of the pants to keep flames out. The sleeves have cuffs with thumb holes to keep the sleeves in place and prevent flames from sneaking in. When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under the coveralls.

The fluorescent yellow fabric and reflective stripes on these sweatshirts make you stand out. They meet Class 3 ANSI/ISEA 107 standards for high-visibility clothing, so you’ll be seen from ¼ mile away. These sweatshirts also meet Category 3 NFPA 70E and NFPA 2112 for moderate protection against flames and electrical arc flashes. Made with a aramid/modacrylic blend, these sweatshirts are both durable and comfortable. To help prevent body heat from escaping, they have snug knit cuffs and a snug knit waistband. Keep your hands warm in the exterior pocket. They have an interior pocket for storage.

When choosing clothing to protect you from arc flashes, match the arc rated personal protective equipment (PPE) category required by your workplace.

Made of self-extinguishing Pyrolon, these coveralls help comply with NFPA 2113 standards when worn over flame-resistant clothing. Pyrolon won’t melt or drip if intermittently exposed to flames, which reduces the risk of burns. These coveralls provide full body coverage and are breathable to keep you cool while working. They have a zipper down the front.

These vests have a fleece lining to keep you warm. A flap covers the snaps, so they won't scratch equipment or heat up if there's a fire.

Wear these coveralls for neck-to-ankle protection from electrical arc-flashes and flash fires. They’re bright yellow with reflective strips to help you stand out in busy areas and dim conditions. They meet NFPA 70E and NFPA 2112 standards for protection from arc flashes and flames, as well as ANSI/ISEA 107 standards for visibility. They’re rated Class 3, which means you'll be visible from at least _1/4 of a mile away. Made of a cotton/nylon fabric, these coveralls are soft and wear resistant.

Check the personal protective equipment (PPE) category and minimum arc rating provided for your workplace and select all required clothing and personal protective equipment to meet that rating. These coveralls are rated for Category 2, the most common arc flash rating for industrial applications.

These jackets meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. They also meet ASTM F2733 standards for protection against flash fires. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These jackets are made of PVC-coated Nomex. They have snaps down the front and a storm flap to keep rain out. They have hook and loop cuffs; tighten to fit your wrist or gloves.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Hoods—Fasten a hood (sold separately) to the collar snaps.