Stay visible—even in dim light—and shielded from flames and arc flash hazards. These shirts meet NFPA 70E and NFPA 2112 standards for protecting your torso and arms against flash fire and electrical arc flashes. Choose shirts that meet the arc rated category required by your workplace. These shirts are rated Category 2, the most common rating for industrial applications. Bright in color and decked out with reflective strips, these shirts meet Class 3 ANSI/ISEA 107 to make you visible from a _¼ mile away. Use them around moving vehicles, on busy shop floors, and when operating machinery.

Made of cotton/nylon blend, these shirts are breathable and moisture wicking, so you won’t get too hot. They have concealed mesh vents on the back that let air in and keep you cool as you move.

When measuring chest size, measure around the fullest part of your chest.

These jackets meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 4. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These jackets are made of a durable aramid/modacrylic blend. They have a flap in the front that conceals the zipper.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Bib overalls have adjustable suspenders to modify the length.

When measuring chest size, measure around the fullest part of your chest. Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these suits.

Withstand flash fire for up to 8 seconds—the clothes in these kits can protect you for twice as long as most flame-resistant clothing. Made of rayon/aramid, the coveralls and mask absorb moisture to keep you cool and comfortable.

The coveralls have a 10 ft. Kevlar strap, so nearby teammates can pull you to safety without putting themselves at risk if there’s a fire. The reflective stripes keep you easy to see where there's low visibility. The zipper closure on the front is covered by a hook-and-loop flap so it doesn't scrape equipment or get hot. The legs have zippers on the sides as well, so you can fit them over bulky boots. Tighten the hook and loop straps on the bottom of the pants to keep flames out. The sleeves have cuffs with thumb holes to keep the sleeves in place and prevent flames from sneaking in. When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under the coveralls.

These overalls meet NFPA 70E for protection against flames and electrical arc flashes. They’re adjustable for a snug fit that shields skin from hazards while keeping you mobile—tighten and loosen the suspenders and secure cuffs around boots with hook and loop straps. Choose a bib overall that meets the arc rated personal protective equipment (PPE) category required by your workplace. The higher the arc rating, the greater the flame resistance.

Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these overalls.

These jackets meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. They also meet ASTM F2733 standards for protection against flash fires. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These jackets are made of PVC-coated Nomex. They have snaps down the front and a storm flap to keep rain out. They have hook and loop cuffs; tighten to fit your wrist or gloves.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Hoods—Fasten a hood (sold separately) to the collar snaps.