Slip these floodlights onto round poles to brighten parking lots, walkways, and other areas without a power source. Install them in a sunny spot and their battery will charge all day—it’s large enough to power them for several nights. These floodlights shine at full brightness for two hours after sunset, then dim for the rest of the night. If they sense motion in the dark, they’ll brighten again. Rated IP65, these floodlights are sealed to keep out dust, rain, and sprinklers.

Style A have an insulated battery that can charge in temperatures as low as 0° F, so they’re a good choice for cold climates. You can adjust the light appearance with a switch. Choose a hardwire floodlight for areas with long periods of cloudy weather. If the battery runs out, they switch to the wired power source.

Light up offshore rigs, coal mines, and other outdoor areas where gas, vapor, or dust could ignite. These lights have an enclosure that contains sparks and explosions, so they won’t react with nearby hazards. The enclosure is also rated IK10, the highest impact rating, so it can withstand heavy blows without breaking. These lights are UL marine listed, with an aluminum housing and stainless steel hardware that resist corrosion from saltwater. They’re also IP66 rated, meaning they are sealed to keep out dust and heavy rain.

Mount these lights to a wall or square pole using the included bracket. The bracket pivots, so you can aim the beam right where you need it.

Brighten outdoor areas where combustible gases may be present in the event of a leak. Originally designed for marine ports where chemicals are handled, these lights will not ignite flammable materials. They’re UL marine listed, with an aluminum housing and stainless steel hardware that resist corrosion. They’re also rated IP66 for protection from dust and high-pressure washdowns.

Style A meet ANSI C136.31 for handling 3G vibrations, such as those caused by high winds. Fasten them to a wall or slip them over a 1 5/8" OD pole. Add a mounting bracket (sold separately) to adapt these lights to a 2 3/8" OD pole and pivot them up to 180°.

Style B have a built-in bracket for mounting them to walls, ceilings or square poles. It pivots, so you can aim the beam where you need it. Add a mounting bracket (sold separately) to slip these lights onto a standard 2 3/8" OD pole.

Bring light to your parking lot or walkway in minutes—these lights come wired and already attached to a lightweight pole. All you have to do is unfold the light head and secure it with a single screw, mount the pole to your existing anchor bolts, and connect them to your power source. The baseplate works with common anchor bolt patterns. If you don’t have existing anchor bolts, set the included ones in concrete.

Once these lights are up and running, a light sensor turns them on at dusk and off at dawn. A motion sensor brightens them when someone walks by at night, and they’ll dim again after 30 minutes of inactivity. Download the free app to your mobile device to adjust the light and motion sensor settings via Bluetooth.

Choose lights with one head for roadways and the edges of parking lots. Choose lights with two heads for the center of parking lots and other large areas.

16 ft. high lights are rated for 3 second wind gusts up to 120 mph per AASHTO specifications. They meet wind zone standards for all inland and U.S. coastal areas except South Florida. 20 ft. high lights are rated for 3 second wind gusts up to 90 mph per AASHTO specifications. They meet inland wind zone standards.

Illuminate trailer yards and other outdoor areas, as well as flagpoles and signs. These lights pivot, so you can aim the beam where you need it. All are rated for wet locations. The narrower the beam angle, the more intense and far-reaching the light.

Select a light appearance to match your existing lighting. If you're not sure what light appearance your fixtures have, choose a light with more than one light appearance. Use the switch to adjust its appearance and brightness.

Lights rated IP65 are sealed against dust and wet weather. Lights rated IP66 are protected from dust and high-pressure washdowns.

Lights with a sensor turn on at dusk and off at dawn to save energy.

Thread-in lights screw into outdoor-rated outlet boxes or 1/2 NPSM conduit. Bracket-mount lights can be attached to walls or square poles. Slide-on lights slip over the top of a standard 2 3/8" OD pole. You can also add a bracket (sold separately) to adapt lights for a different mounting location.