Shrink Tape | McMaster-Carr

Filter by

Width

Color

Maximum Temperature

Material

Thickness

Adhesive Type

Tape Type

Overall Thickness

Minimum Temperature

Roll Diameter

Tape Construction

Manufacturer Model Number

Length

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

For Printer Model

REACH

RoHS

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Spool ID

Liner Type

Performance

Electrically Insulating

Spool Material

For Wire Gauge

Voltage Rating

Label Printer Tape Type

110 Products

Heat-Shrink Tape for Composites

Wrap this tape around carbon fiber and other composite parts, then heat to 150° F. Tape shrinks to squeeze out air bubbles and apply pressure so parts cure without voids.

	Lg., ft.	Overall Thk.	Adhesive Type	Color	Temp. Range, ° F	Shrink Temp., ° F		Each
Polyester Plastic



	3/4"	300	0.002"	None	Clear	150 to 400	150	6820A12	000000


	1"	300	0.002"	None	Clear	150 to 400	150	6820A13	00000
	1 1/4"	300	0.002"	None	Clear	150 to 400	150	6820A14	00000
	1 1/2"	300	0.002"	None	Clear	150 to 400	150	6820A15	00000
	2"	300	0.002"	None	Clear	150 to 400	150	6820A16	00000
	2 1/2"	300	0.002"	None	Clear	150 to 400	150	6820A17	00000

Self-Fusing Electrical Tape


Tape	Tape with Guide Line and Tapered Edge

No need for adhesive—this tape fuses to itself for a permanent seal and stretches to fit virtually any form. Also known as cold-shrink tape.

3M Scotch 70—Scotch 70 is arc resistant and can be used as an overwrap.

Guide Line—Tape with guide line has a ridge in the center and a tapered edge that allows for an even overlap when wrapping.

	Material	Temp. Range, ° F	Dielectric Strength, V/mil	Voltage Rating, V	Specs. Met	Choose a Color		Each
Electrical Tape







	Self-Fusing Adhesive

	1/4"	36	0.01"	Silicone Rubber	-65 to 390	400	3,200	Fed. Spec. A-A-59163 Type I, UL 510	Black, Clear, Gray, Red	7643A61	000000


	1/2"	54	0.01"	Silicone Rubber	-65 to 390	400	Not Rated	Fed. Spec. A-A-59163 Type I, UL 510	Black, Clear, Gray, Red	7643A74	00000
	1"	30	0.012"	Silicone Rubber	-65 to 390	400	Not Rated	Fed. Spec. A-A-59163 Type I, UL 510	Black, Clear, Gray, Red	7643A79	00000
	1"	36	0.02"	Silicone Rubber	-65 to 390	400	Not Rated	Fed. Spec. A-A-59163 Type I, UL 510	Black, Clear, Gray, Red	7643A75	00000




			Self-Fusing Adhesive—With Guide Line and Tapered Edge

			1"	36	0.02"	Silicone Rubber	-65 to 390	400	Not Rated	Fed. Spec. A-A-59163 Type II, UL 510	Black, Clear, Gray, Red	7643A71	00000


			1 1/2"	36	0.03"	Silicone Rubber	-65 to 390	400	Not Rated	Fed. Spec. A-A-59163 Type II, UL 510	Black, Clear, Gray, Red	7643A72	00000
			2"	36	0.02"	Silicone Rubber	-65 to 390	400	Not Rated	Fed. Spec. A-A-59163 Type II, UL 510	Black, Clear, Gray, Red	7643A76	00000
			2"	36	0.03"	Silicone Rubber	-65 to 390	400	Not Rated	Fed. Spec. A-A-59163 Type II, UL 510	Black, Clear, Gray, Red	7643A73	00000


			3M Scotch 70







							Self-Fusing Adhesive

							1"	30	0.012"	Silicone Rubber	35 to 355	875	Not Rated	Fed. Spec. A-A-59163 Type I	Gray	76455A35	00000

High-Voltage Electrical Tape

Use this rubber tape to splice cable in high-voltage applications.

3M Scotch 23—Scotch 23 tape has a liner for easier handling.

3M Scotch 130C—Scotch 130C tape has excellent thermal conductivity for longer life.

1,060 V/mil Dielectric Strength—Tape with 1,060 V/mil dielectric strength withstands lower temperatures than our other high-voltage electrical tape. It can be used outdoors and underground.

	Material	Adhesive Type	Temp. Range, ° F	Voltage Rating, V	Thermal Conductivity, W/(m⋅°C)	Color		Each
Electrical Tape







	1,060 V/mil Dielectric Strength

	3/4"	30	0.02"	EPDM	Self-Fusing	-40 to 210	132,000	—	Black	7682A42	000000


	1"	10	0.02"	EPDM	Self-Fusing	-40 to 210	132,000	—	Black	7682A41	00000
	1"	30	0.02"	EPDM	Self-Fusing	-40 to 190	132,000	—	Black	7682A65	00000
	1 1/2"	30	0.02"	EPDM	Self-Fusing	-40 to 210	132,000	—	Black	7682A43	00000
	2"	30	0.02"	EPDM	Self-Fusing	-40 to 210	132,000	—	Black	7682A44	00000


	3M Scotch 23







					800 V/mil Dielectric Strength

					3/4"	30	0.03"	EPDM	Self-Fusing	0 to 190	69,000	0.2	Black	76455A72	00000


					1"	30	0.03"	EPDM	Self-Fusing	0 to 190	69,000	0.2	Black	76455A71	00000
					1 1/2"	30	0.03"	EPDM	Self-Fusing	0 to 190	69,000	0.2	Black	76455A73	00000
					2"	30	0.03"	EPDM	Self-Fusing	0 to 190	69,000	0.2	Black	76455A74	00000


					3M Scotch 130C







									750 V/mil Dielectric Strength

									3/4"	30	0.03"	EPDM	Self-Fusing	0 to 190	69,000	0.3	Black	76455A18	00000


									1"	30	0.03"	EPDM	Self-Fusing	0 to 190	69,000	0.3	Black	76455A65	00000

Epson K-Sun Label Printer Tape for Wire and Cable

Create custom labels for wire and cable with your Epson K-Sun printer.

Heat-Shrink Tubing—Slide heat-shrink tubing tape over the cut end of a wire or cable, then apply heat for a snug fit.

				For Wire
	Wd.	Message Color	Mfr. Model No.	Ga.	OD	For Printer Series	Thk.	Roll Lg., ft.	Temp. Range, ° F	Color		Each
Continuous Heat-Shrink Tubing







				Polyolefin

				1/8"	Black	203YLBWPX	22 to 16	0.03" to 0.05"	LabelShop, LabelWorks, LabelWorks PX	0.02"	8	-60 to 220	White	4512T211	000000


				1/8"	Black	203YLBYPX	22 to 16	0.03" to 0.05"	LabelShop, LabelWorks, LabelWorks PX	0.02"	8	-60 to 220	Yellow	4512T212	00000
				3/16"	White	205STWBPX	12 to 8	0.08" to 0.13"	LabelShop, LabelWorks, LabelWorks PX	0.01"	8	-60 to 220	Black	4512T146	00000
				3/16"	Black	205STBRPX	12 to 8	0.08" to 0.13"	LabelShop, LabelWorks, LabelWorks PX	0.01"	8	-60 to 220	Red	4512T141	00000
				3/16"	Black	205STBWPX	12 to 8	0.08" to 0.13"	LabelShop, LabelWorks, LabelWorks PX	0.01"	8	-60 to 220	White	4512T142	00000
				3/16"	Black	205STBYPX	12 to 8	0.08" to 0.13"	LabelShop, LabelWorks, LabelWorks PX	0.01"	8	-60 to 220	Yellow	4512T143	00000
				1/4"	Black	208YLBWPX	18 to 6	0.1" to 0.24"	LabelShop, LabelWorks PX	0.02"	8	-60 to 275	White	4512T41	00000
				1/4"	Black	208YLBYPX	18 to 6	0.1" to 0.26"	LabelShop, LabelWorks, LabelWorks PX	0.02"	8	-60 to 275	Yellow	8439N14	00000
				3/8"	Black	210STBWPX	12 to 4	0.08" to 0.2"	LabelShop, LabelWorks, LabelWorks PX	0.03"	7	-60 to 220	White	4512T151	00000
				1/2"	White	211STWBPX	8 to 2	0.13" to 0.26"	LabelShop, LabelWorks, LabelWorks PX	0.01"	8	-60 to 220	Black	4512T134	00000
				1/2"	Black	211STBRPX	8 to 2	0.13" to 0.26"	LabelShop, LabelWorks, LabelWorks PX	0.01"	8	-60 to 220	Red	4512T133	00000


				1/2"	Black	211STBWPX	8 to 2	0.13" to 0.26"	LabelShop, LabelWorks, LabelWorks PX	0.01"	8	-60 to 220	White	4512T131	00000
				1/2"	Black	211STBYPX	8 to 2	0.13" to 0.26"	LabelShop, LabelWorks, LabelWorks PX	0.01"	8	-60 to 220	Yellow	4512T132	00000
				7/8"	Black	221STBWPX	1 to 4/0	0.29" to 0.46"	LabelShop, LabelWorks, LabelWorks PX	0.02"	8	-60 to 220	White	4512T312	00000
				7/8"	Black	221STBYPX	1 to 4/0	0.29" to 0.46"	LabelShop, LabelWorks, LabelWorks PX	0.02"	8	-60 to 220	Yellow	8439N12	00000

Brady Label Printer Tape for Wire and Cable

Make labels for wire and cable with your Brady M-series printer.

Continuous Heat-Shrink Tubing

Slide heat-shrink tubing tape over the cut end of a wire or cable, then apply heat for a snug fit.

Flame Retardant—Flame-retardant tape meets BS and EN standards for preventing the spread of flames and toxic gas. It also meets ASTM E662 standards for low smoke output.

				For Wire
	Wd.	Color	Message Color	Ga.	OD	Mfr. Model No.	Thk.	Roll Lg., ft.	Mount Type	Temp. Range, ° F	Specs. Met		Each
For Brady M21 Series Printers







				Polyolefin

				1/8"	White	Black	22 to 16	0.05" to 0.11"	M21-125-C-342	0.02"	7	Wraparound	-90 to 265	—	2310N11	000000


				1/8"	Yellow	Black	22 to 16	0.05" to 0.11"	M21-125-C-342-YL	0.02"	7	Wraparound	-90 to 265	—	2310N15	00000
				3/16"	White	Black	20 to 10	0.06" to 0.15"	M21-187-C-342	0.02"	7	Wraparound	-90 to 265	—	2310N12	00000
				3/16"	Yellow	Black	20 to 10	0.06" to 0.15"	M21-187-C-342-YL	0.02"	7	Wraparound	-90 to 265	—	2310N16	00000
				1/4"	White	Black	16 to 8	0.09" to 0.22"	M21-250-C-342	0.025"	7	Wraparound	-90 to 265	—	2310N13	00000
				1/4"	Yellow	Black	16 to 8	0.09" to 0.22"	M21-250-C-342-YL	0.025"	7	Wraparound	-90 to 265	—	2310N17	00000
				3/8"	White	Black	12 to 4	0.13" to 0.32"	M21-375-C-342	0.025"	7	Wraparound	-90 to 265	—	2310N14	00000
				3/8"	Yellow	Black	12 to 4	0.13" to 0.32"	M21-375-C-342-YL	0.025"	7	Wraparound	-90 to 265	—	2310N18	00000


				For Brady M4 and M5 Series Printers







								Polyolefin—Flame Retardant, Zero Halogen

								1"	White	Black	8 to 4	0.19" to 0.32"	M4C-375-7641	0.03"	6	Wraparound	-20 to 220	ASTM E662, BS 6853, EN 45545	5317N44	00000


								1"	White	Black	20 to 16	0.06" to 0.11"	M4C-125-7641	0.025"	6	Wraparound	-20 to 220	ASTM E662, BS 6853, EN 45545	5317N41	00000
								1"	White	Black	16 to 10	0.09" to 0.15"	M4C-187-7641	0.028"	6	Wraparound	-20 to 220	ASTM E662, BS 6853, EN 45545	5317N42	00000
								1"	White	Black	12 to 8	0.12" to 0.21"	M4C-250-7641	0.031"	6	Wraparound	-20 to 220	ASTM E662, BS 6853, EN 45545	5317N43	00000

Pre-Cut Heat-Shrink Tubing

Slide heat-shrink tubing tape over the cut end of a wire or cable, then apply heat for a snug fit.

For M7 Series Printers—Tape for M6 and M7 printers requires a compatible printer ink ribbon.

Flame Retardant—Flame-retardant tape meets BS and EN standards for preventing the spread of flames and toxic gas. It also meets ASTM E662 standards for low smoke output.

Low Outgassing—Low outgassing tape produces almost no volatile emissions, even in high-vacuum settings. It meets ASTM E595, which is an outgassing standard developed by NASA for products used in highly controlled environments.

Tape Adapters—To use M6 tape in an M7 printer, you'll need a tape adapter.

	Tape															Printer Ink Ribbons for M6 Series Printers		Printer Ink Ribbons for M7 Series Printers		Tape Adapters
					For Wire
	Wd.	Lg.	Color	Message Color	Ga.	OD	Mfr. Model No.	Thk.	Roll Lg., ft.	No. of Labels per Roll	Mount Type	Temp. Range, ° F	Specs. Met		Each		Each		Each		Each
For Brady M4 and M5 Series Printers







				Polyolefin

				3/4"	1/4"	White	Black	22 to 16	0.05" to 0.11"	M4-125-075-342	0.02"	5	80	Wraparound	-60 to 275	—	5317N14	000000	———	0	———	0	———	0


				3/4"	3/8"	White	Black	20 to 10	0.06" to 0.15"	M4-187-075-342	0.02"	5	80	Wraparound	-60 to 275	—	5317N13	00000	———	0	———	0	———	0
				3/4"	1/2"	White	Black	16 to 8	0.09" to 0.22"	M4-250-075-342	0.025"	5	80	Wraparound	-60 to 275	—	5317N15	00000	———	0	———	0	———	0
				3/4"	5/8"	White	Black	12 to 4	0.13" to 0.32"	M4-375-075-342	0.025"	5	80	Wraparound	-60 to 275	—	5317N16	000000	———	0	———	0	———	0


				For Brady M5 Series Printers







								Polyolefin

								1"	1/4"	White	Black	22 to 16	0.05" to 0.11"	M5-125-1-342	0.02"	6	80	Wraparound	-60 to 275	—	5317N17	00000	———	0	———	0	———	0


								1"	3/8"	White	Black	20 to 10	0.06" to 0.15"	M5-187-1-342	0.02"	6	80	Wraparound	-60 to 275	—	5317N12	00000	———	0	———	0	———	0
								1"	1/2"	White	Black	16 to 8	0.09" to 0.22"	M5-250-1-342	0.025"	6	80	Wraparound	-60 to 275	—	5317N11	00000	———	0	———	0	———	0
								1"	5/8"	White	Black	12 to 4	0.13" to 0.32"	M5-375-1-342	0.025"	6	80	Wraparound	-60 to 275	—	5317N18	000000	———	0	———	0	———	0


								For Brady M6 and M7 Series Printers







												Polyolefin

												1"	1/8"	White	—	28 to 20	0.02" to 0.08"	M6-094-1-342-WT	0.027"	4	100	Wraparound	-65 to 275	—	5317N34	00000	9117N121	000000	2184N111	000000	2168N128	00000


												1"	1/4"	White	—	22 to 16	0.04" to 0.11"	M6-125-1-342-WT	0.023"	6	100	Wraparound	-65 to 275	—	5317N35	00000	9117N121	00000	2184N111	00000	2168N128	0000
												1"	3/8"	White	—	20 to 10	0.06" to 0.15"	M6-187-1-342-WT	0.023"	5	100	Wraparound	-65 to 275	—	5317N36	00000	9117N121	00000	2184N111	00000	2168N128	0000
												1"	1/2"	White	—	16 to 8	0.09" to 0.21"	M6-250-1-342-WT	0.028"	7	100	Wraparound	-65 to 275	—	5317N37	000000	9117N121	00000	2184N111	00000	2168N128	0000
												1"	5/8"	White	—	12 to 4	0.12" to 0.32"	M6-375-1-342-WT	0.028"	8	100	Wraparound	-65 to 275	—	5317N38	000000	9117N121	00000	2184N111	00000	2168N128	0000
												1"	7/8"	White	—	8 to 1	0.19" to 0.45"	M6-500-1-342-WT	0.028"	10	100	Wraparound	-65 to 275	—	5317N39	000000	9117N121	00000	2184N111	00000	2168N128	0000




														PVDF—Low Outgassing

														1"	1/8"	White	—	26 to 18	0.03" to 0.08"	M6-094-1-345-WT	0.016"	4	100	Wraparound	-65 to 435	ASTM E595	5317N69	000000	9117N122	00000	2184N13	00000	2168N128	0000


														1"	1/4"	White	—	20 to 16	0.06" to 0.11"	M6-125-1-345-WT	0.016"	6	100	Wraparound	-65 to 435	ASTM E595	5317N71	000000	9117N122	00000	2184N13	00000	2168N128	0000
														1"	3/8"	White	—	16 to 10	0.09" to 0.15"	M6-187-1-345-WT	0.016"	6	100	Wraparound	-65 to 435	ASTM E595	5317N72	000000	9117N122	00000	2184N13	00000	2168N128	0000
1"														1/2"	White	—	12 to 8	0.12" to 0.21"	M6-250-1-345-WT	0.016"	7	100	Wraparound	-65 to 435	ASTM E595	5317N73	000000	9117N122	00000	2184N13	00000	2168N128	0000
1"	5/8"													White	—	8 to 4	0.19" to 0.32"	M6-375-1-345-WT	0.016"	8	100	Wraparound	-65 to 435	ASTM E595	5317N74	000000	9117N122	00000	2184N13	00000	2168N128	0000
1"	7/8"													White	—	6 to 1	0.25" to 0.45"	M6-500-1-345-WT	0.016"	10	100	Wraparound	-65 to 435	ASTM E595	5317N75	000000	9117N122	00000	2184N13	00000	2168N128	0000


For Brady M7 Series Printers







														Polyolefin

														1"	1/4"	White	—	22 to 16	0.05" to 0.11"	M7-125-1-342	0.02"	8	100	Wraparound	-65 to 275	—	2090N21	00000	———	0	2184N111	00000	———	0


														1"	1/4"	Yellow	—	22 to 16	0.05" to 0.11"	M7-125-1-342-YL	0.02"	8	100	Wraparound	-65 to 275	—	2090N283	00000	———	0	2184N111	00000	———	0
				1"										3/8"	White	—	20 to 10	0.06" to 0.15"	M7-187-1-342	0.02"	8	100	Wraparound	-65 to 275	—	2090N255	00000	———	0	2184N111	00000	———	0
				1"	3/8"									Yellow	—	20 to 10	0.06" to 0.15"	M7-187-1-342-YL	0.02"	8	100	Wraparound	-65 to 275	—	2090N442	00000	———	0	2184N111	00000	———	0
				1"	1/2"									White	—	16 to 8	0.09" to 0.22"	M7-250-1-342	0.025"	8	100	Wraparound	-65 to 275	—	2090N131	00000	———	0	2184N111	00000	———	0
				1"	1/2"									Yellow	—	16 to 8	0.09" to 0.22"	M7-250-1-342-YL	0.025"	8	100	Wraparound	-65 to 275	—	2090N448	00000	———	0	2184N111	00000	———	0
				1"	5/8"									White	—	12 to 4	0.13" to 0.32"	M7-375-1-342	0.025"	8	100	Wraparound	-65 to 275	—	2090N268	000000	———	0	2184N111	00000	———	0
				1"	5/8"	Yellow								—	12 to 4	0.13" to 0.32"	M7-375-1-342-YL	0.025"	8	100	Wraparound	-65 to 275	—	2090N51	000000	———	0	2184N111	00000	———	0




						Polyolefin—Flame Retardant, Zero Halogen

						1"	1/8"							White	—	28 to 20	0.05" to 0.08"	M7-094-1-7641	0.024"	4	100	Wraparound	-20 to 220	ASTM E662, BS 6853, EN 45545	5317N45	00000	———	0	2184N13	00000	———	0


						1"	1/4"							White	—	22 to 16	0.06" to 0.15"	M7-125-1-7641	0.02"	6	100	Wraparound	-20 to 220	ASTM E662, BS 6853, EN 45545	5317N46	00000	———	0	2184N13	00000	———	0
						1"	3/8"							White	—	20 to 10	0.06" to 0.15"	M7-187-1-7641	0.02"	6	100	Wraparound	-20 to 220	ASTM E662, BS 6853, EN 45545	5317N47	000000	———	0	2184N13	00000	———	0
						1"	1/2"							White	—	16 to 8	0.12" to 0.21"	M7-250-1-7641	0.025"	7	100	Wraparound	-20 to 220	ASTM E662, BS 6853, EN 45545	5317N48	000000	———	0	2184N13	00000	———	0
						1"	5/8"							White	—	12 to 4	0.19" to 0.32"	M7-375-1-7641	0.025"	8	100	Wraparound	-20 to 220	ASTM E662, BS 6853, EN 45545	5317N49	000000	———	0	2184N13	00000	———	0
						1"	7/8"	White						—	8 to 1	0.25" to 0.45"	M7-500-1-7641	0.025"	10	100	Wraparound	-20 to 220	ASTM E662, BS 6853, EN 45545	5317N51	000000	———	0	2184N13	00000	———	0

Thermal-Transfer Label Printer Tape for Wire and Cable

Make custom labels for wire and cable with your desktop thermal-transfer printer. These labels are only compatible with thermal-transfer printer ink ribbons.

Continuous Heat-Shrink Tubing

Slide heat-shrink tubing tape over the cut end of a wire or cable, then apply heat for a snug fit.

Printer Ink Ribbons—Printer ink ribbons have a standard 1" roll ID. The ink is on the outside of the ribbon roll. To load, unroll the ribbon from the bottom, then feed it under the printer head.

	Tape												Printer Ink Ribbons
			Roll			For Wire
	Wd.	Thk.	ID	Dia.	Lg., ft.	Ga.	OD	Color	Mount Type	Temp. Range, ° F		Each		Each
Polyolefin



		1/4"	0.02"	3"	8"	100	22 to 16	0.03" to 0.05"	White	Wraparound	-65 to 275	8374N15	0000000	9889N118	0000000


		3/8"	0.02"	3"	8"	90	20 to 10	0.03" to 0.1"	White	Wraparound	-65 to 275	8374N16	000000	9889N118	000000
		1/2"	0.025"	3"	8"	90	16 to 8	0.05" to 0.13"	White	Wraparound	-65 to 275	8374N17	000000	9889N118	000000
		5/8"	0.025"	3"	8"	75	12 to 4	0.08" to 0.2"	White	Wraparound	-65 to 275	8374N18	000000	9889N118	000000

Installation Tools for Heat-Shrink Tubing Labels


Shown Attaching a Label to a Wire

Attach heat-shrink tubing labels to wire faster than by hand. These tools are especially useful when labeling a high volume of wires. Four barrels of various sizes accommodate a range of wire diameters.

Use the included screwdriver to secure wires without switching tools. A built-in LED light improves visibility in low-light conditions.

For Wire		Tip		Handle
Gauge	OD	Lg.	Material	Lg.	Material	Batteries Included	Features	Includes		Each
23 to 4	0.023" to 0.210"	2 3/4"	Steel	4 3/4"	Plastic, Rubber	Yes	LED Light	Four Tips, One Screwdriver	9461N111	000000

Dymo Label Printer Tape for Wire and Cable


For Dymo Rhino Series Printers	For Dymo XTL Series Printers

Create labels for wire and cable with your LabelManager, Rhino, or XTL printer.

Heat-Shrink Tubing—Slide heat-shrink tubing tape over the cut end of a wire or cable, then apply heat for a snug fit.

					For Wire
	Wd.	Color	Message Color	Mfr. Model No.	Ga.	OD	Thk.	Roll Lg., ft.	Temp. Range, ° F	Material		Each
For Dymo Rhino Series Printers







				Continuous Heat-Shrink Tubing

				1/4"	White	Black	18051	16 to 7	0.05" to 0.15"	0.02"	5	-65 to 255	Polyolefin	6948T21	000000


				1/4"	Yellow	Black	18052	16 to 7	0.05" to 0.15"	0.02"	5	-65 to 255	Polyolefin	6948T31	00000
				3/8"	White	Black	18053	12 to 4	0.08" to 0.23"	0.02"	5	-65 to 255	Polyolefin	6948T22	00000
				3/8"	Yellow	Black	18054	12 to 4	0.08" to 0.23"	0.02"	5	-65 to 255	Polyolefin	6948T32	00000
				1/2"	White	Black	18055	10 to 1	0.1" to 0.3"	0.02"	5	-65 to 255	Polyolefin	6948T23	00000
				1/2"	Yellow	Black	18056	10 to 1	0.1" to 0.3"	0.02"	5	-65 to 255	Polyolefin	6948T33	00000
				3/4"	White	Black	18057	6 to 4/0	0.16" to 0.48"	0.02"	5	-65 to 255	Polyolefin	6948T24	00000
				3/4"	Yellow	Black	18058	6 to 4/0	0.16" to 0.48"	0.02"	5	-65 to 255	Polyolefin	6948T34	00000
				1"	White	Black	1805443	4 to 4/0	0.2" to 0.6"	0.02"	5	-65 to 275	Polyolefin	6948T25	00000


				For Dymo XTL Series Printers







								Continuous Heat-Shrink Tubing

								1/4"	White	Black	1868809	16 to 7	0.05" to 0.15"	0.02"	9	-65 to 255	Polyolefin	2249N11	000000


								1/2"	White	Black	1868810	10 to 1	0.1" to 0.3"	0.02"	9	-65 to 255	Polyolefin	2249N12	000000
								1"	White	Black	1868811	4 to 4/0	0.2" to 0.6"	0.02"	9	-65 to 255	Polyolefin	2249N13	000000