About Sleeving
More
About Durometer Hardness Scales
More
About Rubber
More
T-Slotted Framing Caps, Covers, and Seals
Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.
For technical drawings and 3-D models, click on a part number.
Panel gaskets seal out liquid and dust while holding panels securely in place. Once installed, the gasket isn’t noticeable. However, the panel and gasket need to be installed before the structure is fully assembled. Press them into a T-slot.
For Rail Ht. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | For T-Slot Wd. | For Panel Thick. | Lg., ft. | Material | Temperature Range, °F | Hardness | Hardness Rating | Color | Each | |
| 1", 25mm | 2", 50mm | 3", 75mm | 0.256", 6mm | 5 mm | 6 | Silicone Rubber | -95° to 435° | Durometer 65A | Medium Hard | Gray | 0000000 | 000000 |
| 1 | 3", 80mm | 4 | 0.32", 8mm | 6 mm | 6 1/2 | Silicone Rubber | -95° to 435° | Durometer 65A | Medium Hard | Gray | 0000000 | 00000 |
High-Temperature Rubber Trim
This trim withstands temperatures up to 450° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of silicone, it resists abrasion better than plastic trim. Push this trim onto an edge and it grips on three sides for a tight hold. All of this trim is very flexible so it can bend around tight corners. It has a medium hardness rating, which offers a balance of cushioning and impact resistance. It's nonmarking and can be use outdoors.
For technical drawings and 3-D models, click on a part number.
Inside | Outside | Per Ft. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Choose a Color | Available Lengths, ft. | 1-99 | 100-Up | |
Silicone Rubber | |||||||||||||
Style 1 | |||||||||||||
| 3/32" | 21/64" | 3/16" | 3/8" | Very Flexible | Medium | -80° to 450° | Yes | Yes | 0000000 | 00000 | 00000 | ||
Style 2 | |||||||||||||
| 1/8" | 1/4" | 1/4" | 5/16" | Very Flexible | Medium | -80° to 450° | Yes | Yes | Orange | 000000 | 0000 | 0000 | |
Style 3 | |||||||||||||
| 1/16" | 1/4" | 3/16" | 5/16" | Very Flexible | Medium | -80° to 450° | Yes | Yes | 0000000 | 0000 | 0000 | ||
Style 4 | |||||||||||||
| 1/16" | 5/16" | 1/8" | 3/8" | Very Flexible | Medium | -80° to 450° | Yes | Yes | 0000000 | 0000 | 0000 | ||
| 1/8" | 1/4" | 1/4" | 5/16" | Very Flexible | Medium | -80° to 450° | Yes | Yes | 0000000 | 0000 | 0000 | ||
Style 5 | |||||||||||||
| 1/16" | 3/8" | 1/4" | 1/2" | Very Flexible | Medium | -80° to 450° | Yes | Yes | Orange | 000000 | 0000 | 0000 | |
| 1/8" | 15/32" | 23/64" | 5/8" | Very Flexible | Medium | -80° to 450° | Yes | Yes | Orange | 000000 | 0000 | 0000 | |
| 3/16" | 9/16" | 15/32" | 3/4" | Very Flexible | Medium | -80° to 450° | Yes | Yes | 0000000 | 0000 | 0000 | ||
| 1/4" | 19/32" | 37/64" | 13/16" | Very Flexible | Medium | -80° to 450° | Yes | Yes | 0000000 | 0000 | 0000 | ||
Style 6 | |||||||||||||
| 1/16" | 7/32" | 15/64" | 5/16" | Very Flexible | Medium | -80° to 450° | Yes | Yes | 0000000 | 0000 | 0000 | ||
| 1/8" | 9/32" | 19/64" | 3/8" | Very Flexible | Medium | -80° to 450° | Yes | Yes | 0000000 | 0000 | 0000 | ||
Heavy Duty High-Temperature Rubber Trim
A metal core adds strength and stability, making this trim more durable than other high-temperature rubber trim. It withstands temperatures up to 400° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of silicone, this trim resists abrasion better than plastic trim. Push it onto an edge and it grips on three sides for a tight hold. All of this trim is flexible so it can bend along a gradual curve. It has a hard rating to withstand high levels of impact. It's nonmarking and can be use outdoors.
For technical drawings and 3-D models, click on a part number.
Inside | Outside | Per Ft. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Available Lengths, ft. | 1-99 | 100-Up | |
Silicone Rubber | |||||||||||||
Style 1 | |||||||||||||
| 1/8" | 31/64" | 25/64" | 9/16" | Flexible | Hard | -50° to 400° | Yes | Yes | Black | 00000000 | 000000 | 00000 | |
Style 2 | |||||||||||||
| 9/32" | 5/8" | 33/64" | 43/64" | Flexible | Hard | -50° to 400° | Yes | Yes | Black | 00000000 | 00000 | 0000 | |
High-Temperature Foam Trim
This silicone foam trim withstands temperatures up to 450° F—more than twice as high as other foam trim. Designed to cushion during impact, it protects equipment and surfaces from damage. Push this trim onto an edge and it grips on three sides for a tight hold. All of the trim is very flexible so it can bend around tight corners. It's nonmarking and can be used outdoors.
For technical drawings and 3-D models, click on a part number.
Inside | Outside | Per Ft. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Flexibility | Temperature Range, °F | For Use Outdoors | Nonmarking | Choose a Color | Available Lengths, ft. | 1-99 | 100-Up | |
Silicone Foam | ||||||||||||
Style 1 | ||||||||||||
| 3/32" | 21/64" | 3/16" | 3/8" | Very Flexible | -80° to 450° | Yes | Yes | 0000000 | 00000 | 00000 | ||
Style 2 | ||||||||||||
| 1/8" | 1/4" | 1/4" | 5/16" | Very Flexible | -80° to 450° | Yes | Yes | Orange | 000000 | 0000 | 0000 | |
Style 3 | ||||||||||||
| 1/16" | 1/4" | 3/16" | 5/16" | Very Flexible | -80° to 450° | Yes | Yes | 0000000 | 0000 | 0000 | ||
Style 4 | ||||||||||||
| 1/16" | 5/16" | 1/8" | 3/8" | Very Flexible | -80° to 450° | Yes | Yes | 0000000 | 0000 | 0000 | ||
| 1/8" | 1/4" | 1/4" | 5/16" | Very Flexible | -80° to 450° | Yes | Yes | 0000000 | 0000 | 0000 | ||
Style 5 | ||||||||||||
| 1/8" | 15/32" | 23/64" | 5/8" | Very Flexible | -80° to 450° | Yes | Yes | Orange | 000000 | 0000 | 0000 | |
| 3/16" | 9/16" | 15/32" | 3/4" | Very Flexible | -80° to 450° | Yes | Yes | 0000000 | 0000 | 0000 | ||
| 1/4" | 19/32" | 37/64" | 13/16" | Very Flexible | -80° to 450° | Yes | Yes | 0000000 | 0000 | 0000 | ||
Style 6 | ||||||||||||
| 1/16" | 7/32" | 15/64" | 5/16" | Very Flexible | -80° to 450° | Yes | Yes | 0000000 | 0000 | 0000 | ||
| 1/8" | 9/32" | 19/64" | 3/8" | Very Flexible | -80° to 450° | Yes | Yes | 0000000 | 0000 | 0000 | ||
Spiral Sleeving
Wrap this sleeving around cable, cords and wires to protect them and to form bundles. Unlike cable ties and tape, this sleeving can be unwound and reused.
Silicone sleeving is softer and more pliable than polyethylene sleeving, but does not hold up as well when rubbed or scraped. It cushions and protects fragile wires without damaging them, and is often used with fiber-optic cable.
5 ft. Lg. | |||||||
|---|---|---|---|---|---|---|---|
| ID | Expanded ID | OD | Wall Thick. | Temperature Range, °F | Color | Each | |
| 1/8" | 1/2" | 3/16" | 1/32" | -75° to 355° | White | 00000000 | 000000 |
High-Temperature Tape Sleeving
A mica and silicone rubber blend allows this sleeving to withstand intermittent heat up to 2100° F. It also creates a fire barrier around its contents. A good option for emergency patches, it can be quickly applied to hose or cable like tape. When wrapping, sleeving should overlap itself by half its width.
15 ft. Lg. | 100 ft. Lg. | ||||||
|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Max. Temperature, °F | Color | Each | Each | ||
Mica/Silicone Rubber Blend | |||||||
| 1/2" | 0.005" | 2100° | Gray | 0000000 | 00000 | 0000000 | 000000 |
| 1" | 0.005" | 2100° | Gray | 0000000 | 0000 | 0000000 | 00000 |
| 1 1/2" | 0.005" | 2100° | Gray | 0000000 | 0000 | 0000000 | 00000 |
| 2" | 0.005" | 2100° | Gray | 0000000 | 00000 | 0000000 | 00000 |
| 2 1/2" | 0.005" | 2100° | Gray | 0000000 | 00000 | 0000000 | 00000 |
| 3" | 0.005" | 2100° | Gray | 0000000 | 00000 | 0000000 | 00000 |
High-Temperature Silicone Rubber U-Channels
- Color: Red
- Temperature Range: -60° to 400° F
- Tensile Strength: 700 psi
- For Use Outdoors: Yes
The open top allows U-channels to slide over an edge. Use them as seals and trim. Silicone, also called polysiloxane, offers good resistance to ozone and salt water.
For technical drawings and 3-D models, click on a part number.
High-Temperature Silicone Rubber 90° Angles
- Color: Red
- Temperature Range: -60° to 400° F
- Tensile Strength: 700 psi
- For Use Outdoors: Yes
Seal and cushion corners with these 90° angles. Silicone, also known as polysiloxane, offers good resistance to ozone and salt water.
For technical drawings and 3-D models, click on a part number.
Fire-Retardant High-Temperature Silicone Rubber 90° Angles
- Color: Black
- Temperature Range: -85° to 400° F
- Tensile Strength: 725 psi
- For Use Outdoors: Yes
- Specifications Met: ASTM D2000 GE, UL 94 V-0
These 90° angles meet UL 94V0 for flame retardance. Use them to seal and cushion corners. Made of silicone, which is also known as polysiloxane, they have good resistance to ozone and salt water.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | |||||||
|---|---|---|---|---|---|---|---|---|
| Width | Height | Width | Height | Wall Thickness | Wall Thickness Tolerance | Durometer | Each | |
3 ft. Lg | ||||||||
| 1/2" | 1/2" | 3/8" | 3/8" | 1/8" | -0.027" to 0.027" | 60A (Medium Hard) | 0000000 | 000000 |
| 3/4" | 3/4" | 5/8" | 5/8" | 1/8" | -0.027" to 0.027" | 60A (Medium Hard) | 0000000 | 00000 |
| 1" | 1" | 7/8" | 7/8" | 1/8" | -0.027" to 0.027" | 60A (Medium Hard) | 0000000 | 00000 |
6 ft. Lg | ||||||||
| 1/2" | 1/2" | 3/8" | 3/8" | 1/8" | -0.027" to 0.027" | 60A (Medium Hard) | 0000000 | 00000 |
| 3/4" | 3/4" | 5/8" | 5/8" | 1/8" | -0.027" to 0.027" | 60A (Medium Hard) | 0000000 | 00000 |
| 1" | 1" | 7/8" | 7/8" | 1/8" | -0.027" to 0.027" | 60A (Medium Hard) | 0000000 | 00000 |
Food Industry High-Temperature Silicone Rubber 90° Angles
- Color: White
- Temperature Range: -85° to 400° F
- Tensile Strength: 900 psi
- For Use Outdoors : Yes
- Specifications Met: ASTM D2000 GE, FDA Compliant 21 CFR 177.2600, NSF/ANSI 51
FDA compliant and NSF/ANSI 51 certified, these 90° angles are approved for direct contact with food. Use them to seal, protect, and cushion corners. Made of silicone—also known as polysiloxane—they resist ozone and salt water.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | 3 ft. Lg. | 6 ft. Lg. | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Width | Height | Width | Height | Wall Thickness | Wall Thickness Tolerance | Durometer | Each | Each | ||
| 1/2" | 1/2" | 3/8" | 3/8" | 1/8" | -0.027" to 0.027" | 50A (Medium) | 00000000 | 000000 | 00000000 | 000000 |
| 3/4" | 3/4" | 5/8" | 5/8" | 1/8" | -0.027" to 0.027" | 50A (Medium) | 00000000 | 00000 | 00000000 | 00000 |
| 1" | 1" | 7/8" | 7/8" | 1/8" | -0.027" to 0.027" | 50A (Medium) | 00000000 | 00000 | 00000000 | 00000 |
High-Strength High-Temperature Silicone Rubber 90° Angles
- Color: Red
- Temperature Range: -85° to 400° F
- Tensile Strength: 1,200 psi
- For Use Outdoors: Yes
- Specifications Met: ASTM D2000 GE
With nearly twice the tensile strength of standard high-temperature silicone, these 90° angles absorb shock better and last longer. Use them to seal and cushion corners. They resist ozone and salt water.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | 3 ft. Lg. | 6 ft. Lg. | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Width | Height | Width | Height | Wall Thickness | Wall Thickness Tolerance | Durometer | Each | Each | ||
| 1/2" | 1/2" | 3/8" | 3/8" | 1/8" | -0.027" to 0.027" | 50A (Medium) | 0000000 | 000000 | 0000000 | 000000 |
| 3/4" | 3/4" | 5/8" | 5/8" | 1/8" | -0.027" to 0.027" | 50A (Medium) | 0000000 | 00000 | 0000000 | 00000 |
| 1" | 1" | 7/8" | 7/8" | 1/8" | -0.027" to 0.027" | 50A (Medium) | 0000000 | 00000 | 0000000 | 00000 |