Flame- and Arc-Flash Cold-Protection Face Masks

These face masks meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These hats are made of abrasion-resistant aramid/viscose blend fabric, which keeps you warm without accumulating moisture.
Material | Arc Rating, cal/cm2 | Arc Rated PPE Category | Specifications Met | Color | Size | Each | |
Aramid/Lyocell Fabric Blend | 10 | 2 | NFPA 70E | White | One Size | 00000000 | 000000 |
Flame- and Arc-Flash-Protection Face Masks


Protect your head from electrical arc flashes. These face masks won’t melt or drip when exposed to intermittent flames. They meet NFPA 70E standards for personal protection equipment (PPE) category 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. Masks are soft, breathable, and washable.
Westex® UltraSoft® Rib fabric is a lightweight material that’s 88% flame-resistant cotton and 12% nylon knit.
CarbonX fabric is double-layered for better flame resistance than Westex® UltraSoft® Rib fabric.
Flame- and Arc-Flash-Protection Hard-Hat Liners
Often used in utility work, metalworking, and welding, these hard-hat liners meet NFPA 70E to protect from flames and electrical arc flashes. They also shield your head and nape from the wind and cold. Secure the liner to your hard hat with the attached hook and loop tabs on each side. Choose a hard-hat liner that meets the arc rated personal protective equipment (PPE) category required by your workplace.
Liners with head, nape, and neck coverage have two layers of insulation inside the flame-resistant shell to protect against the cold: a mid-layer of aramid/modacrylic fabric and an inner layer of cotton/modacrylic fleece.
Use liners with warming pad slots for extra warmth around the ears—slip hand warmer pads (sold separately) into the slots on each side.
Add masks to protect your mouth, chin, and nose. They have hook and loop tabs on each side that stick to the sides of the liner.


Arc Rated PPE Category | Arc Rating, cal/cm2 | Material | Insulation Material | Closure Type | Features | Color | Weight, oz. | Hard Hat Size | Specifications Met | Each | |
Head, Nape, and Neck Coverage | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
3 | 27 | Cotton/Modacrylic Blend Fabric | Aramid/Modacrylic Blend Fabric, Cotton/Modacrylic Blend Fleece | Hook and Loop | Two Layers of Insulation, Warming Pad Slots | Black | 5.1 | One Size | ASTM F1506, NFPA 70E | 0000000 | 000000 |

Arc Rated PPE Category | Arc Rating, cal/cm2 | Material | Insulation Material | Closure Type | Color | Weight, oz. | Specifications Met | Each | |
Face Coverage | |||||||||
---|---|---|---|---|---|---|---|---|---|
2 | 20 | Cotton/Modacrylic Blend Fabric | Cotton/Modacrylic Blend Fleece | Hook and Loop | Black | 1.6 | ASTM F1506, NFPA 70E | 0000000 | 000000 |

Pkg. | |||||||
---|---|---|---|---|---|---|---|
Garment | Lg. | Wd. | Body Warmer Type | Number of Warmers Included | 1-5 | 6-Up | |
Body Warmer | 3 1/2" | 2" | Pad | 1 Pair | 00000000 | 00000 | 00000 |
Flame- and Arc-Flash Cold-Protection Gaiters

Shield your face and neck from flame and electrical hazards while working in the cold. These gaiters meet NFPA 70E and 2112 standards for protection from arc flash and flash fire. They’re rated PPE category 2, which is the most common arc flash standard for industrial applications. Made from a modacrylic fabric, these gaiters are lightweight and flexible. They trap heat but allow moisture to escape, so you stay warm and dry. They have four-way stretch for a customizable fit—fold them in half for a double layer of protection and warmth.
Check the PPE category and minimum arc rating provided for your workplace, and select all required clothing and personal protective equipment to meet that rating.
Arc Rated PPE Category | Arc Rating, cal/cm2 | Material | Lg. | Dia. | Specifications Met | Features | Color | Size | Each | |
2 | 11 | Modacrylic Fabric | 20" | 9 1/4" | OSHA Compliant 29 CFR 1910.269, NFPA 70E, NFPA 2112, ASTM F1506 | Four-Way Stretch | Black | One Size | 0000000 | 000000 |
Flame- and Arc-Flash-Protection Gaiters

Keep cool while staying shielded from flame and electrical hazards. These gaiters meet NFPA 70E standards for protection against flames and arc flashes. Made from flame-resistant fabric, these gaiters defend against radiant heat and sparks while remaining soft and comfortable. They wick moisture from your head and neck to keep you cool and are easy to breath through when worn as a face covering. With UPF 50 sun protection, they block 98% of UV rays from reaching your skin. An odor-resistant treatment prevents bacteria growth, eliminating odors caused by sweat.
Check the PPE category and minimum arc rating provided for your workplace, and select all required clothing and personal protective equipment to meet that rating. These gaiters meet Category 1, the lowest level of arc-rated PPE.
Arc Rated PPE Category | Arc Rating, cal/cm2 | Material | Lg. | Dia. | Specifications Met | Ultraviolet Protection Factor (UPF) | Features | Color | Size | Each | |
1 | 4.9 | Modacrylic/Lyocell/Spandex Fabric Blend | 12" | 9 1/4" | OSHA Compliant 29 CFR 1910.269, NFPA 70E, ASTM F1506 | 50 | Odor-Resistant Finish | Gray | One Size | 0000000 | 000000 |
Cold-Protection Hard-Hat Wind Guards
![]() Ear, Face, Nape, and Neck Coverage | ![]() Dark Blue |
![]() Red |
Stretch these form-fitting guards over hard hats to provide warmth and protection from the wind. They are made of moisture-wicking polyester to prevent moisture buildup.
Cold-Protection Hard-Hat Liners






Add a layer of warmth to your hard hat. Use the hook and loop attachments to fasten liners to the suspension of your hat and to secure under your chin.
Cotton provides better breathability than nylon.
Polyester fleece insulation is moisture wicking to prevent moisture buildup.
Sherpa fleece insulation is warmer than other fleece linings. It is soft and thick, yet lightweight.
Liners with two layers of insulation have a layer of polypropylene fiber or polyurethane foam, as well as a layer of polyester fleece, for extra warmth.
Liners with warming pack slots give you a spot to insert hand warmer pads (not included) to keep your ears warm.
Fluorescent yellow liners are bright, so you stand out in all lighting conditions.
Each | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Application | Material | Insulation Material | Closure Type | Features | Color | Weight, oz. | Hard Hat Size | 1-11 | 12-Up | |
Head, Nape, and Neck Coverage | ||||||||||
Cold Protection | Cotton Fabric | Polyester Sherpa Fleece Fabric | Hook and Loop | __ | Dark Blue | 2.4 | One Size | 0000000 | 000000 | 000000 |
Cold Protection | Cotton Fabric | Polyester Fleece Fabric and Polypropylene Fiber | Hook and Loop | Two Layers of Insulation | Dark Blue | 4.8 | One Size | 0000000 | 00000 | 00000 |
Cold Protection, Water Resistant, High Visibility | Polyester Fabric | Polyester Fleece Fabric | Hook and Loop | __ | Fluorescent Yellow | 2.8 | One Size | 00000000 | 00000 | 00000 |
Head, Nape, Neck, and Face Coverage | ||||||||||
Cold Protection | Cotton Fabric | Acrylic/Polyester Sherpa Fleece Fabric Blend | Hook and Loop | Removable Face Cover | Dark Blue | 5.5 | One Size | 0000000 | 00000 | 00000 |
Cold Protection, Water Resistant | Polyester Fabric | Polyester Fleece Fabric and Polyurethane Foam | Hook and Loop | Removable Face Cover, Two Layers of Insulation, Warming Pack Slots | Black | 7.2 | One Size | 00000000 | 00000 | 00000 |
Cold-Protection Face Masks

These face masks protect your head and neck from the cold.
Material | Color | Size | Each | |
Acrylic Fabric | Black | One Size | 00000000 | 000000 |
Shop Face Masks

Also known as painters' spray socks, these face masks are often used to protect against paint and dust. They are made of breathable, washable cotton.
Material | Color | Size | Pkg. Qty. | Pkg. | |
Cotton Fabric | Off-White | One Size | 6 | 00000000 | 000000 |
Welding Face Masks


These face masks are double-layered to protect your head from radiant heat, flames, and welding sparks. They are designed to meet NFPA 1971 standards for structural firefighting. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance.
Nomex aramid is heavier than PBI, yet breathable and moisture wicking. They meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. This is the most common PPE category for standard industrial applications.
PBI is lightweight and provides better wear- and heat-resistance than Nomex.
Application | Material | Arc Rating, cal/cm2 | Arc Rated PPE Category | Specifications Met | Color | Size | Each | |
Welding, Electrical Protection, Flame Resistant, Heat Protection | Nomex Aramid Fabric | 10 | 2 | NFPA 70E, NFPA 1971 | White | One Size | 00000000 | 000000 |
Welding, Flame Resistant, Heat Protection | PBI Fabric | __ | __ | NFPA 1971 | Brown | One Size | 00000000 | 00000 |
Clean Room Hoods


Prevent dust, microbes and other pollutants from contaminating a clean room. When laundered to clean room standards, these hoods can be reused up to 100 times. Wash them prior to first use and after each use.
All hoods are suitable for use in clean rooms rated to both Federal Standard and ISO classes. In both standards, clean rooms with lower class ratings have fewer contaminants.
Polyester/carbon fiber hoods discharge static electricity and prevent the buildup of static from harming electronic equipment.
Polyester hoods withstand liquid splashes and abrasion.
Environmental Rating | Hood Style | Material | Surface Resistivity, ohms/sq. | Closure Type | Features | Color | Size | Each | |
Fed. Std. Class 1,000, ISO Class 6 | Open Face | Polyester/Carbon Fiber Fabric Blend | 107 | Snaps | __ | White | 00000000 | 000000 | |
Fed. Std. Class 1,000, ISO Class 6 | Covered Face | Polyester Fabric | __ | Snaps | Detachable Face Cover | White | 0000000 | 00000 |
Disposable Clean Room Hoods

Designed to meet clean room standards, these hoods prevent dust particles and microbes on you from contaminating a space. Made of Tyvek polyethylene, they hold up to limited contact with nonhazardous liquids, such as water and paint spray. The heat- and pressure-bonded fibers make these hoods soft yet strong. You can throw them out after you’re done using them.
Environmental Rating | Hood Style | Material | Closure Type | Color | Size | Each | |
ISO Class 5 | Open Face | Tyvek Polyethylene Fabric | Tie | White | One Size | 0000000 | 00000 |
Full-Face Covers

A hairnet and beard cover in one, these covers keep hairs from contaminating kitchens, labs, and assembly lines. Made from polypropylene, they’re breathable and comfortable to wear for long periods.
Material | Color | Size | Pkg. Qty. | Pkg. | |
Polypropylene Fabric | Blue | One Size | 100 | 0000000 | 000000 |
Disposable Hoods

Breathable to keep you cool and comfortable, these hoods protect against dirt and grime. An elastic face opening keeps hair in and contaminants out.
Polypropylene offers economical protection in environments where abrasion resistance and liquid splashes are not a concern.
Tyvek polyethylene provides better tear and abrasion resistance than polypropylene. It holds up to occasional contact with nonhazardous liquids, such as water and paint spray. It is made of heat- and pressure-bonded fibers that form a barrier that's soft yet strong.
Kleenguard polypropylene is made of five layers of nonwoven fabric, so it is more abrasion resistant and harder to tear than Tyvek polyethylene. It holds up to occasional contact with nonhazardous liquids, such as water and paint spray. The material is antistatic, so it protects sensitive equipment from electrostatic discharge.
Gaiters


Nosepiece and
Cooling Pack
Prevent sunburn and heat stress. These gaiters stop 98% of the sun’s rays from hitting your face and neck. And made of a polyester and spandex fabric, they’re soft and stretchy yet breathable. They’ll also wick sweat away—you can even wear them as a sweatband. Since they prevent bacteria growth from sweat, they won’t smell. To cool yourself off, wet them with cold water and airflow will create a cool, damp feeling.
Gaiters with a cooling pack are the best choice for stagnant, indoor environments. The reusable cooling pack stays 64° F for up to 2 hours, no airflow required. Just chill it in ice water, a fridge, or near an air conditioner before use.
Gaiters | Replacement Cooling Packs | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Material | Cooling Material | Cooling Time, hrs. | Lg. | Dia. | Ultraviolet Protection Factor (UPF) | Size | Choose a Color | Each | Each | ||
Gaiters with Odor-Resistant Finish | |||||||||||
Polyester/Spandex Fabric Blend | Evaporative Fabric | 2 | 19 5/8" | 9 7/8" | 50 | One Size | 0000000 | 000000 | 000000 | 00 | |
Polyester/Spandex Fabric Blend | Evaporative Fabric | 2 | 19 5/8" | 9 7/8" | 50 | One Size | 0000000 | 00000 | 000000 | 00 | |
Gaiters with Odor-Resistant Finish, Adjustable Nosepiece, and Cooling Pack | |||||||||||
Polyester/Spandex Fabric Blend | Evaporative Fabric | 2 | 12" | 9 7/8" | 50 | One Size | Blue | 0000000 | 00000 | 0000000 | 000000 |
Cold-Protection Bump Caps

Keep your head safe and warm—these winter hats have bump cap inserts to protect against knocks and scrapes.
Hoods are made of stretchable polyester fleece for a snug and comfortable fit. Tuck them into your jacket for added warmth. You can also remove the bump cap insert to wear the hood as a thermal layer under a hard hat.
Auto-Darkening Welding Safety Goggles with Hood


Get up close to your welds with these goggles. Their lightweight, compact design lets you weld in tight spots or awkward positions. A flame-resistant hood shields your ears, head, and neck from sparks and spatter better than traditional welding helmets. For different protection needs, wear them over prescription glasses, under a hard hat, or without the hood. Use the external controls to adjust power and shade settings without removing these goggles.
As you begin to weld, two sensors detect the light and automatically darken the lens. Unlike traditional green welding lenses, these goggles use a true color lens to enhance clarity and color accuracy. They allow for a better look at your weld pool to increase weld quality and reduce eye strain.
Optical clarity measures how clearly a welder can see through the lens based on four categories: visual accuracy, light diffusion, consistency, and distortion. Each category is given a rating on a scale of 1 to 3. The lower the number, the better the clarity. Better optical clarity allows for precise welds, reduces eye strain, and improves focus.
Welding Lens | Lens | Hood | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shade No. | Optical Clarity | Technology | Color | Material | Ht. | Wd. | Color | Material | Wt., lbs. | Batteries Included | Switching Time, ms | No. of Arc Sensors | Specifications Met | Each | |
3, 5, 6, 7, 8, 9, 10, 11, 12 | 1/1/1/2 | True Color View | Blue | Polycarbonate Plastic | 2" | 4 1/4" | Black | Cotton Fabric | 1.6 | Yes | 0.07 | 2 | ANSI/ISEA Z87.1 | 00000000 | 0000000 |

Hood | ||||
---|---|---|---|---|
Color | Material | Size | Each | |
Black | Cotton Fabric | One Size | 00000000 | 000000 |

For Lens | ||||
---|---|---|---|---|
Ht. | Wd. | Includes | Each | |
2" | 4 1/4" | Five Replacement Outer Filter Lens Covers, Three Replacement Inner Filter Lens Covers | 00000000 | 000000 |