About Selecting a Mixer
More
Air-Powered Mixers with Batch Cans
Mix and dispense from the same container. Also known as direct-drive mixers, these operate at high speeds for rapid turnover. Use them to mix liquids with a viscosity similar to water and light oils. Adjust the mixing speed with the needle valve. Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing.
Mixers with 304 stainless steel containers resist corrosion in harsh environments.
Mixers | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Propellers | Shaft | Air Connection | Repl. Cans with Lids | Repl. Lids Only | ||||||||||||||
| Cap., gal. | hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Pipe Size  | Thread Type | Gender | Air Consumption | O'all Ht. | Each | Each | Each | |||
For Thin Liquids | ||||||||||||||||||
Steel Container with Plastic Spigot | ||||||||||||||||||
| 5 | 3/4 | 0-1,750 | 1 | 5" | 316 Stainless Steel | 10" | 1/2" | 1/4 | NPT | Female | 20 cfm @ 80 psi | 17" | 0000000 | 0000000 | 0000000 | 0000000 | 0000000 | 000000 |
| 10 | 3/4 | 0-1,750 | 1 | 5" | 316 Stainless Steel | 12" | 1/2" | 1/4 | NPT | Female | 20 cfm @ 80 psi | 22 1/2" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 |
304 Stainless Steel Container with 316 Stainless Steel 3/4 NPT Ball Valve | ||||||||||||||||||
| 5 | 3/4 | 0-1,750 | 1 | 5" | 316 Stainless Steel | 10" | 1/2" | 1/4 | NPT | Female | 20 cfm @ 80 psi | 16 13/32" | 0000000 | 00000000 | 0000000 | 000000 | 0000000 | 000000 |
| 10 | 3/4 | 0-1,750 | 1 | 5" | 316 Stainless Steel | 12" | 1/2" | 1/4 | NPT | Female | 20 cfm @ 80 psi | 21" | 0000000 | 00000000 | 0000000 | 000000 | 0000000 | 000000 |
| Each | ||
| 00000000 | 0000000 |
Stand-Mount Air-Powered Mixers for Small Batches
Clamp the 10" long bar of these mixers onto the vertical shaft of a stand (sold separately). A needle valve lets you adjust mixing speed. Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing.
Mixers for thin liquids are for liquids with a viscosity similar to water and light oils. Also known as direct-drive mixers, they operate at high speeds for rapid turnover.
Mixers for thick liquids are for liquids with a viscosity similar to honey and molasses. Also known as gear-drive mixers, they turn the propeller at low speeds.
Propellers | Shaft | Air Connection | Mixers | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Cap., gal. | Pipe Size | Thread Type | Gender | Air Consumption | O'all Ht. | Wt., lbs. | Each | |
For Thin Liquids | |||||||||||||||
| 1/3 | 500-10,000 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 5 | 1/4 | NPT | Male | 13 cfm @ 80 psi | 16 1/2" | 5 | 0000000 | 0000000 |
| 1/3 | 500-10,000 | 1 | 2 1/2" | 316 Stainless Steel | 18" | 3/8" | 5 | 1/4 | NPT | Male | 13 cfm @ 80 psi | 22 1/2" | 5 | 0000000 | 000000 |
| 1/3 | 500-10,000 | 1 | 2 1/2" | 316 Stainless Steel | 24" | 3/8" | 5 | 1/4 | NPT | Male | 13 cfm @ 80 psi | 28 1/2" | 5 | 0000000 | 000000 |
| 1/3 | 500-10,000 | 1 | 2 1/2" | 316 Stainless Steel | 30" | 3/8" | 5 | 1/4 | NPT | Male | 13 cfm @ 80 psi | 34 1/2" | 5 | 0000000 | 000000 |
| 1/2 | 500-7,000 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 26 | 1/4 | NPT | Male | 27 cfm @ 80 psi | 16 3/4" | 5 | 0000000 | 000000 |
For Thick Liquids | |||||||||||||||
| 1/3 | 15-170 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 5 | 1/4 | NPT | Male | 13 cfm @ 80 psi | 22" | 7 | 0000000 | 00000000 |
| 1/3 | 100-1,200 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 26 | 1/4 | NPT | Male | 13 cfm @ 80 psi | 19 1/2" | 6 | 0000000 | 000000 |
| 1/2 | 100-1,000 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 26 | 1/4 | NPT | Male | 27 cfm @ 80 psi | 20" | 6 | 0000000 | 00000000 |
Shaft | Clamp | Base | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Stand Type | For Mixer Shaft Lg. | For Maximum Container Dia. | Dia. | Material | Type | Material | Knob Material | Ht. | Dp. | Wd. | Material | Each | |
| Container Mount | 24", 30" | 15" | 5/8" | 304 Stainless Steel | Swivel | Aluminum | Plastic | 26" | 14" | 14" | Steel | 00000000 | 0000000 |
| Tabletop | 12", 18" | __ | 5/8" | 304 Stainless Steel | Swivel | Aluminum | Plastic | 28" | 14" | 14" | Steel | 00000000 | 000000 |
Hand-Held Air-Powered Mixers for Small Batches
Manually control and monitor mixing. Also known as direct-drive mixers, they operate at high speeds for rapid turnover. Use them to mix liquids with a viscosity similar to water and light oils. Adjust mixing speed with the needle valve. Mixers have a removable shaft and a built-in propeller. Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing.
Shaft | Propellers | Air Connection | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | hp | Mixer Speed, rpm | No. of | Dia. | Material | Cap., gal. | Pipe Size | Thread Type | Gender | Air Consumption | O'all Ht. | Wt., lbs. | Each | |
For Thin Liquids | |||||||||||||||
| 15" | 1/4" | 1/2 | 300-1,200 | 1 | 2 5/8" | 304 Stainless Steel | 2 | 1/4 | NPT | Female | 15.9 cfm @ 80 psi | 21 3/4" | 8 | 0000000 | 0000000 |
| 21" | 1/2" | 1/2 | 300-800 | 1 | 5" | 304 Stainless Steel | 10 | 1/4 | NPT | Female | 13.7 cfm @ 80 psi | 27 7/16" | 11 | 0000000 | 000000 |
| 40" | 1/2" | 1/2 | 300-450 | 1 | 5" | 304 Stainless Steel | 55 | 1/4 | NPT | Female | 11.9 cfm @ 80 psi | 46 7/16" | 18 | 0000000 | 000000 |
Pipe-Mount Air-Powered Mixers for Small Batches
The pipe-clamp connection allows you to quickly raise or lower these mixers to change containers. Also known as direct-drive mixers, they operate at high speeds for rapid turnover. Use them to mix liquids with a viscosity similar to water and light oils. A needle valve allows you to adjust the mixing speed. Propellers are left hand and move clockwise when viewed from above to direct flow downward for efficient mixing.
Mixer with one propeller comes with four shafts of multiple lengths.
Mixer with two propellers is used for faster and more thorough mixing than mixers with one propeller.
Propellers | Shaft | Air Connection | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hp | Mixer Speed, rpm | For Pipe OD | No. of | Dia. | Material | Lg. | Dia. | Cap., gal. | Pipe Size | Thread Type | Gender | Air Consumption | O'all Ht. | Wt., lbs. | Each | |
For Thin Liquids | ||||||||||||||||
| 1/2 | 300-1,750 | 1 1/2" | 1 | 4" | 316 Stainless Steel | 12" 16" 20" 24" | 5/8" | 100 | 1/4 | NPT | Female | 25 cfm @ 80 psi | 17 13/16" 21 13/16" 25 13/16" 29 13/16" | 12 | 0000000 | 000000000 |
| 1/2 | 300-1,750 | 1 1/2" | 2 | 4" | 316 Stainless Steel | 32" | 5/8" | 100 | 1/4 | NPT | Female | 25 cfm @ 80 psi | 37 13/16" | 17 | 0000000 | 00000000 |
Stand-Mount Electric Mixers for Small Batches
Clamp the 10" long bar of these mixers onto the vertical shaft of a stand (sold separately). Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing. An adjustment dial allows you to alter your mixing speed.
Mixers for thin liquids are for liquids with a viscosity similar to water and light oils. Also known as direct-drive mixers, they operate at high speeds for rapid turnover.
Mixer for thick liquids is for liquids with a viscosity similar to honey and molasses. Also known as a gear-drive mixer, it turns the propeller at low speeds.
Mixers | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Propellers | Shaft | Replacement Propellers | |||||||||||||||
| hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Cap., gal. | Current, A | Frequency, Hz | O'all Ht. | Wt., lbs. | Cord Lg., ft. | Motor Enclosure Type | Each | Each | ||
120V AC Single Phase—Three-Prong Plug | |||||||||||||||||
For Thin Liquids | |||||||||||||||||
| 1/40 | 80-4,000 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 5 | 0.5 | 60 | 20 1/4" | 6 | 6 | Totally Enclosed Nonventilated | 0000000 | 0000000 | 000000 | 00 |
| 1/40 | 80-4,000 | 1 | 2 1/2" | 316 Stainless Steel | 18" | 3/8" | 5 | 0.5 | 60 | 26 1/4" | 7 | 6 | Totally Enclosed Nonventilated | 0000000 | 000000 | 000000 | 00 |
| 1/40 | 80-4,000 | 1 | 2 1/2" | 316 Stainless Steel | 24" | 3/8" | 5 | 0.5 | 60 | 32 1/4" | 8 | 6 | Totally Enclosed Nonventilated | 0000000 | 000000 | 000000 | 00 |
| 1/40 | 80-4,000 | 1 | 2 1/2" | 316 Stainless Steel | 30" | 3/8" | 5 | 0.5 | 60 | 38 1/4" | 9 | 6 | Totally Enclosed Nonventilated | 0000000 | 000000 | 000000 | 00 |
| 1/15 | 40-2,000 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 5 | 1.1 | 60 | 21" | 8 | 6 | Totally Enclosed Nonventilated | 00000000 | 000000 | 0000000 | 000000 |
| 1/10 | 5-1,000 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 26 | 0.8 | 60 | 25" | 9 | 6 | Totally Enclosed Nonventilated | 00000000 | 00000000 | 0000000 | 00000 |
| 1/10 | 300-6,000 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 5 | 0.8 | 60 | 21" | 9 | 6 | Totally Enclosed Nonventilated | 000000000 | 000000 | 000000 | 00 |
| 1/8 | 40-1,200 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 26 | 0.8 | 60 | 23" | 12 | 6 | Totally Enclosed Nonventilated | 0000000 | 00000000 | 0000000 | 00000 |
For Thick Liquids | |||||||||||||||||
| 1/15 | 10-350 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 13 | 1.1 | 60 | 24" | 9 | 6 | Totally Enclosed Nonventilated | 0000000 | 00000000 | 0000000 | 00000 |
Shaft | Clamp | Base | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Stand Type | For Mixer Shaft Lg. | For Maximum Container Dia. | Dia. | Material | Type | Material | Knob Material | Ht. | Dp. | Wd. | Material | Each | |
| Container Mount | 24", 30" | 15" | 5/8" | 304 Stainless Steel | Swivel | Aluminum | Plastic | 26" | 14" | 14" | Steel | 00000000 | 0000000 |
| Tabletop | 12", 18" | __ | 5/8" | 304 Stainless Steel | Swivel | Aluminum | Plastic | 28" | 14" | 14" | Steel | 00000000 | 000000 |
Clamp-Mount Electric Mixers for Small Batches
Attach to the rim of a batch can or small container. Also known as direct-drive mixers, these operate at high speeds for rapid turnover. Use them to mix liquids with a viscosity similar to water and light oils. Motor is totally enclosed fan cooled (TEFC) for use in environments with splashing water and dust. Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing.
Propellers | Shaft | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Cap., gal. | Current, A | Frequency, Hz | O'all Ht. | Wt., lbs. | Max. Clamp Opening | Cord Lg., ft. | Each | |
120V AC Single Phase—Three-Prong Plug | |||||||||||||||
For Thin Liquids | |||||||||||||||
| 1/20 | 1,550 | 1 | 3" | 316 Stainless Steel | 12" | 5/16" | 50 | 1.6 | 60 | 18 7/16" | 10 | 2" | 6 | 0000000 | 0000000 |
| 1/20 | 1,550 | 1 | 3" | 316 Stainless Steel | 18" | 5/16" | 50 | 1.6 | 60 | 24 7/16" | 11 | 2" | 6 | 0000000 | 000000 |
| 1/20 | 1,550 | 1 | 3" | 316 Stainless Steel | 24" | 5/16" | 50 | 1.6 | 60 | 30 7/16" | 11 | 2" | 6 | 0000000 | 000000 |
| 1/20 | 1,550 | 1 | 3" | 316 Stainless Steel | 30" | 5/16" | 50 | 1.6 | 60 | 36 7/16" | 11 | 2" | 6 | 0000000 | 000000 |
120/240V AC Single Phase—Wire Leads | |||||||||||||||
For Thin Liquids | |||||||||||||||
| 1/2 | 1,425 | 1 | 4" | 316 Stainless Steel | 32" | 5/8" | 100 | 8.2/4.1 | 50 | 43 3/16" | 47 | 2" | __ | 0000000 | 00000000 |
| 1/2 | 1,725 | 1 | 4" | 316 Stainless Steel | 32" | 5/8" | 100 | 8.8/4.4 | 60 | 43 3/16" | 38 | 2" | __ | 0000000 | 00000000 |
| 1/3 | 1,725 | 1 | 4" | 316 Stainless Steel | 32" | 1/2" | 100 | 6.6/3.3 | 60 | 42" | 30 | 2" | __ | 0000000 | 000000 |
Stand Mixers
Mix adhesives, knead clays, and stir coatings. This mixer meets NSF/ANSI standards for use in food and beverage applications.
| No. of Speeds | Max. Mixer Speed, rpm | Current, A | Frequency, Hz | Ht. | Wd. | Dp. | Housing Material | Container Material | Specifications Met | Includes | Each | |
120V AC Single Phase—Three-Prong Plug | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
7 qt. Capacity | ||||||||||||
| 11 | 900 | 4.2 | 60 | 17 3/4" | 9 1/4" | 16 1/4" | Aluminum | 303 Stainless Steel | NSF/ANSI 8 | Aluminum Mixing Paddle, Stainless Steel Mixing Paddle, Splash Guard with Feed Chute | 000000 | 0000000 |
Immersion Blenders
Reduce sample loss by mixing liquids in your own container. Use to blend liquids and create slurries. Blender meets NSF/ANSI standards for use in food and beverage applications.
| No. of Speeds | Max. Mixer Speed, rpm | Shaft Lg. | Current, A | Frequency, Hz | Dia. | Lg. | Housing Material | Body Material | Shaft Material | Specifications Met | Each | |
120V AC Single Phase—Three-Prong Plug | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
40 L Capacity | ||||||||||||
| 1 | 18,000 | 12" | 6.3 | 60 | 4" | 12" | Polycarbonate Plastic | Thermoplastic | Stainless Steel | NSF/ANSI 8, UL Listed | 00000000 | 0000000 |
Tabletop Blenders
Blend liquids and create slurries. The 64 oz. capacity blender meets NSF/ANSI 8 standards for commercial powered food preparation equipment.
Blenders | Repl. Containers with Lid | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Speeds | Max. Mixer Speed, rpm | Current, A | Frequency, Hz | Ht. | Wd. | Dp. | Housing Material | Container Material | Each | Each | ||
120V AC Single Phase—Three-Prong Plug | ||||||||||||
1 L Capacity | ||||||||||||
| 1 | 22,000 | 3.6 | 60 | 16 1/2" | 8" | 7" | Zinc Alloy | 304 Stainless Steel | 00000000 | 0000000 | 00000000 | 0000000 |
64 fl. oz. Capacity | ||||||||||||
| 3 | 24,000 | 13 | 60 | 17 3/4" | 7 1/2" | 8" | Polycarbonate Plastic | 304 Stainless Steel | 00000000 | 000000 | 000000 | 00 |
| Component | Includes | Each | |
| Repair Kit for 1 L Capacity Blenders | Blade Assembly, Drive Coupling Assembly | 0000000 | 000000 |
| Component | Each | |
| Drive Coupling Assembly | 0000000 | 000000 |