We will reply to your message within an hour.
Each compartment is a removable bin cup, so you can reconfigure the box without emptying the contents.
Adjust the dividers to create the size and number of compartments that you need.
These boxes have durable hinges and are more shatter resistant than other compartmented boxes.
At 5/8" tall and under, these boxes fit in spaces other boxes can’t.
These boxes have a coating on the dividers that protects metal parts from rust and corrosion.
A rubber gasket provides a watertight seal.
These boxes are made with an additive that protects sensitive contents from electrostatic discharge.
A rubber seal in the lid keeps water out.
Use a box as is, or snap on additional boxes to create a mobile storage system that fits your needs.
Choose the box and number of dividers you need. The dividers fit into molded slots in the boxes to create compartments.
When used with a lid, these tote boxes protect contents from electrostatic discharge.
Handy on forklifts and scaffolding, these trays hang on square and rounded rails to keep tools and supplies waist height.
Organize and carry pipe nipples.
With an impact-resistant shell and foam-padded interior, these cases will protect your equipment for years to come.
These versatile storage cases can be used with removable inner pouches.
Remove foam cubes to create a snug fit around equipment.
Protect sensitive parts from electrostatic discharge.
The magnetic base attaches to any steel surface so you can position your pan where you need it. Drain holes in the bottom of the pan prevent dirt and moisture buildup.
An aluminized finish makes these pans corrosion resistant.
Magnetized to hold metal tools and parts, these trays can be used right-side up, sideways, and even upside down.
Made of silicone, these trays bend to hug curves and cling to highly polished surfaces—keeping your tools right where you need them.
A lip on the back allows bin boxes to hang from rails or louvered panels.
A removable window allows 30% more capacity yet still lets you see what's in the box.
These bins dissipate static charges to protect sensitive contents from damage.
A tab on the back of the bin box allows it to be tilted from the shelf without falling.
The ribbed wall design allows the bins to stack or nest.
Attach these bin boxes to any steel surface, such as machinery and cabinets, to keep small tools and parts nearby.
Grab the handle to pull the bin box forward. It has a tab on the back to catch the underside of a shelf when tilted. A raised front and back prevents spills.
Grab the handle to pull the bin box forward. It has a tab on the back to catch the underside of a shelf when tilted. A high front and back prevents spills.
These bins are very strong, with a capacity of 250 lbs. They're also chemical, solvent, and oil resistant.
These bins ship flat so you can keep plenty of extras on hand. They easily assemble without tape, glue, or fasteners.
A conductive coating protects sensitive contents from electrostatic discharge.
These plastic bin boxes are more durable than cardboard bin boxes but are just as easy to assemble without tape, glue, or fasteners.
Six compartments in one bin box let you keep items organized.
Stack bin boxes up to four high without removing the casters.
These bin boxes have a sloped top and a clear lid that slides back for easy access to contents.
The sloped bottom of the picking bin allows parts to flow forward while the shallow-angle lip makes them easily accessible.
Unlike other bin boxes, wire bin boxes are easy to clean and don't collect dust.
Place tools in the pockets, and then roll the pouch for organized, compact storage.
Turn your pail into a versatile toolbox.
The LED light in the handle illuminates the inside of the bag to help identify tools in low-light work areas
Add pockets to a traffic cone for easy access to flashlights, hand tools, and small parts.
Carry and protect levels in these padded bags.
Secure and store test tubes.
These cabinets won't dent, chip, or rust.
Cabinets are stackable with others of the same width and depth.
Protect your sensitive components from electrostatic damage.
Carry multiple compartmented boxes at once using the built-in handle.
Create your own storage system by choosing a frame and adding boxes, which come in a variety of compartment configurations.
Remove individual boxes to take the parts you need without moving the entire storage unit.
Plastic cabinets and boxes won't dent, chip, or rust.
Elevate your cabinets off the ground.
Keep tools and small parts in place and protected from damage.
Turn a tight space into an efficient storage center with these shallow-depth cabinets.
Keep an eye on inventory without opening the doors.
These cabinets have open shelves for storing larger supplies and equipment.
These cabinets have the thickest steel construction that we offer and come with removable bin boxes that hang from panels.
Bins can be stacked on a surface, wall mounted, or attached to a rack.
Racks can be used individually or stacked up to nine high.
Create storage that fits your space with these stackable bin shelves.
Add a base to your bin shelving to elevate parts to a comfortable picking height and make it easier to clean under it.
Dividers snap in and out, allowing you to adjust the width of the compartments.
Bins slope slightly and have a lip to keep contents in place.
Roll these bins near benches or other work areas, and turn each storage level to access the items you need.
Store multiple tools and parts in these bins, which spin so you can easily access the item you need.
Pull out the bin boxes for easy access to contents.
The drawer is divided into labeled compartments.
These cabinets have one undivided drawer.
Store multiple bits of each size. These cabinets have drawers marked with the sizes and decimal equivalents.
The compartments are sized to hold two reduced-shank drill bits and are marked with the bit size.
These pouches fit onto most hand-held power drills and impact drivers. They have a magnetic panel on the front that can hold bits and fasteners.
Attach these pouches to your belt to easily access drill bits while working.
Store and organize drill bits so they stay in good working condition and don't go missing.
Each hole is sized to hold the 1/2" shank of a reduced-shank drill bit and marked with a bit size.
These stands hold round-shank drill bits of different sizes. The holes are marked with the bit size and decimal equivalent.
Drawers and labeled compartments provide space for keeping tools organized. Taps and drill bits are not included.
These steel cases close for easy transport and are labeled with sizes for organizing tools. Taps and drill bits are not included.
Keep taps and drill bits organized. All holes are labeled with sizes. Taps and drill bits are not included.
Organize and store your end mills.
Set these plastic racks on a benchtop or inside a drawer to organize a variety of pliers sizes and styles.
Keep your tweezers organized in these partitioned cases.
Snap any combination of bin cups onto the liner to create a custom configuration for organizing small parts.
Fit these small cases comfortably in your pocket.
Store a variety of sizes and styles of bits and adapters in one compact tray.
Mount the magnetic base to walls, cabinets, and other steel surfaces.
Keep these caddies in your tool drawer or take them with you.
Mount the magnetic backing to walls, cabinets, and other steel surfaces. Magnetic slots secure your screwdrivers.
Tabs hold drivers in place so you can take them with you.
Position these low-profile rails to accommodate screwdrivers of any length.
The slots in these low-profile organizers are a different color than the base so it's clear when tools are missing.
Magnets hold sockets securely in place.
The rail is smooth plastic so the clips move more easily than on steel-rail organizers.
Move the sliding clips to any position along the rail to hold a variety of sockets.
Hold different square drive sizes on the four clip rails stored in these trays.
Store sockets on posts marked with the size.
The slots in these low-profile organizers are a different color than the base so it's clear when tools are missing from your bench top or drawer.
Hold and carry wrenches on both sides of these caddies.
Lock wrenches into these racks before taking them with you. Snap tools into the slots and twist one wrench to lock or unlock the whole set.
Mount to walls, cabinets, and other steel surfaces.
Tabs hold wrenches in place.
Set on a benchtop or mount with screws.
Organize your tool drawer by positioning these low-profile rails to accommodate wrenches of any length.
Keep small tools and parts in these trays for easy access.
Attach the lid to pegboard and then unscrew the jar to grab small parts.
Store tools large and small while keeping them visible.
Hold large and small tools while keeping them visible.
Use these bins to hold small parts.
Avoid trips up and down step ladders to get tools and supplies—mount these trays to top steps that are 13 1/2" to 14" wide and 6" to 6 1/2" deep to keep items securely within reach.
Insert the wand of your vacuum conveyor in the port to move material out of these bins.
Protect your stick electrodes during transport.
Ensure high-quality welds by protecting your welding wire from humidity and corrosion.
Store, protect, and organize your tungsten electrodes.
Store, protect, and organize your TIG welding rods.
20 individual compartments provide convenient storage space for safety eyewear.
12 individual compartments provide convenient storage space for safety goggles.
Store and transport your Starrett combination square in these protective cases that are specially fitted.
Designed specifically to fit Starrett calipers, these cases keep your tools protected while storing and transporting them.
Specifically designed to fit Mitutoyo depth gauges, these cases protect your tools while storing and transporting them.
Protect Starrett depth gauges while storing and transporting them with these specially fitted cases.
Fitted to your Mitutoyo caliper, these cases protect your caliper when you're storing or transporting it.
Store and transport your Mitutoyo variance indicator in these specially fitted protective cases.
Designed specifically to fit Starett variance indicators, these cases protect your tools while storing and transporting them.