SMC Compressed Air Lubricators

Filter by

Manufacturer

Inlet Pipe Size

Outlet Pipe Size

Inlet Thread Type

Outlet Thread Type

Component

Filter/Regulator/Lubricator

Bowl Type

Opaque with Sight Glass

Manufacturer Series

Series Number

Component Configuration

Maximum Pressure

Drain Type

Bowl Material

Maximum Flow Rate @ Pressure

Material

Maximum Pressure Regulation

Pipe Size

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Overall Height

REACH

RoHS

Compliant with Exemptions

Not Compliant

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Lubricant Capacity

Thread Type

Maximum Temperature

143 Products

SMC Modular Compressed Air Lubricators

Add lubrication to your air supply to extend the service life of air-powered tools and equipment. These lubricators connect to other SMC units of the same series with joiner clamps (sold separately)—even if the pipe sizes are slightly different—so you can customize your air preparation system. You can see inside the bowl to check the oil level for refilling. Adjust the amount of lubricant in the air based on your equipment's performance. If your machine is running loudly or showing signs of wear, increase the amount; if you notice oil building up, decrease it. Install these lubricators in your air line after filters and regulators.

10 Series—Metric Female Inlet × Metric Female Outlet

Image of Product. Front orientation. Compressed Air Lubricators. SMC Modular Compressed Air Lubricators.

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.

	Lubricators											Joiner Clamps
		Thread Size						Overall
	Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Max. Temp., ° F	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each
Polycarbonate Bowl—Clear



		AL10-A	M5 × 0.8 mm	M5 × 0.8 mm	3.9 scfm @ 100 psi	145	140	0.24	3 1/8"	1"	8723N419	000000	8550T21	00000

Replacement Compressed Air Lubricator Sight Domes

		Each
Sight Dome	3303N101	00000

20 Series—NPT Female Inlet × NPT Female Outlet

Mounting Bracket—Lubricators with a mounting bracket can be attached to a wall or equipment.

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.

	Lubricators												Mounting Brackets		Joiner Clamps
		Pipe Size						Overall
	Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Max. Temp., ° F	Lubricant Cap., fl. oz.	Ht.	Wd.	Includes		Each		Each		Each
Polycarbonate Bowl—Clear



		AL20-D	1/8	1/8	137 scfm @ 100 psi	145	140	0.85	4 1/2"	1 5/8"	Mounting Bracket	8723N412	000000	9647N124	00000	8210N111	00000

Replacements for Lubricators

		Each
Sight Dome	3303N11	00000
Lubricator Bowl	3299N111	0000

30 Series—NPT Female Inlet × NPT Female Outlet

Mounting Bracket—Lubricators with a mounting bracket can be attached to a wall or equipment.

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.

	Lubricators												Mounting Brackets		Joiner Clamps
		Pipe Size						Overall
	Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Max. Temp., ° F	Lubricant Cap., fl. oz.	Ht.	Wd.	Includes		Each		Each		Each
Polycarbonate Bowl with Polycarbonate Bowl Guard—Clear



		AL30-D	1/4	1/4	211 scfm @ 100 psi	145	140	1.9	5 5/8"	2 1/8"	Mounting Bracket	8723N413	000000	9647N125	00000	8210N112	00000

Replacements for Lubricators

		Each
Sight Dome	3303N11	00000
Lubricator Bowl	3299N113	0000

40 Series—NPT Female Inlet × NPT Female Outlet

Mounting Bracket—Lubricators with a mounting bracket can be attached to a wall or equipment.

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.

	Lubricators												Mounting Brackets		Joiner Clamps
		Pipe Size						Overall
	Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Max. Temp., ° F	Lubricant Cap., fl. oz.	Ht.	Wd.	Includes		Each		Each		Each
Polycarbonate Bowl with Polycarbonate Bowl Guard—Clear



		AL40-D	3/8	3/8	282 scfm @ 100 psi	145	140	4.6	7 1/8"	2 3/4"	Mounting Bracket	8723N414	000000	9647N126	00000	8210N113	00000


		AL40-D	1/2	1/2	282 scfm @ 100 psi	145	140	4.6	7 1/8"	2 3/4"	Mounting Bracket	8723N415	00000	9647N126	0000	8210N113	0000
		AL40-D	3/4	3/4	282 scfm @ 100 psi	145	140	4.6	7 1/8"	2 3/4"	Mounting Bracket	8723N416	00000	9647N127	0000	8210N114	00000

Replacements for Lubricators

		Each
Sight Dome	3303N11	00000
Lubricator Bowl	3299N114	00000

50 Series—NPT Female Inlet × NPT Female Outlet

Mounting Bracket—Lubricators with a mounting bracket can be attached to a wall or equipment.

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.

	Lubricators												Mounting Brackets		Joiner Clamps
		Pipe Size						Overall
	Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Max. Temp., ° F	Lubricant Cap., fl. oz.	Ht.	Wd.	Includes		Each		Each		Each
Polycarbonate Bowl with Polycarbonate Bowl Guard—Clear



		AL50-D	3/4	3/4	529 scfm @ 100 psi	145	140	4.6	10 1/8"	3 1/2"	Mounting Bracket	8723N417	000000	9647N128	00000	8210N115	000000


		AL50-D	1	1	529 scfm @ 100 psi	145	140	4.6	10 1/8"	3 1/2"	Mounting Bracket	8723N418	00000	9647N128	0000	8210N115	00000

Replacements for Lubricators

		Each
Sight Dome	3303N11	00000
Lubricator Bowl	3299N114	00000

SMC Compressed Air Lubricator Bowls


Polycarbonate Bowl—Clear	Nylon Bowl—Clear	Aluminum Bowl—Opaque	Aluminum Bowl—Opaque with Sight Glass

Replace a damaged bowl, or change the bowl material on your SMC modular compressed air lubricator. Bowls come with an O-ring to ensure a tight seal. Check the manufacturer series on your lubricator to ensure compatibility.

Nylon Bowl—Nylon bowls are more resistant to synthetic compressor oils, solvents, and harsh cleaners than polycarbonate bowls.

Aluminum Bowl—Aluminum bowls are stronger than plastic bowls, so they won't crack or shatter if dropped.

	For Inlet Thread Type	Drain Type	Includes		Each
Polycarbonate Bowl—Clear



	AL10-A	Metric	Without Drain	O-Ring	3299N14	00000


	AL20-A	NPT, BSPP, BSPT	Without Drain	O-Ring	3299N11	0000
	AL20-D	NPT	Without Drain	Bowl Guard, O-Ring	3299N112	0000
	AL20-D	NPT	Without Drain	O-Ring	3299N111	0000
	AL30-A	NPT, BSPP, BSPT	Without Drain	Bowl Guard, O-Ring	3299N12	0000
	AL30-D	NPT	Without Drain	Bowl Guard, O-Ring	3299N113	0000
	AL40-A, AL50-A	NPT, BSPP, BSPT	Without Drain	Bowl Guard, O-Ring	3299N13	00000
	AL40-D, AL50-D, AL60-D	NPT	Without Drain	Bowl Guard, O-Ring	3299N114	00000


	Nylon Bowl—Clear



			AL10-A	Metric	Without Drain	O-Ring	3299N21	0000


			AL20-D	NPT	Without Drain	Bowl Guard, O-Ring	3299N22	0000
			AL30-D	NPT	Without Drain	Bowl Guard, O-Ring	3299N23	00000
			AL40-D, AL50-D, AL60-D	NPT	Without Drain	Bowl Guard, O-Ring	3299N24	00000


			Aluminum Bowl—Opaque



					AL20-A	NPT, BSPP, BSPT	Without Drain	O-Ring	3299N15	0000


					AL20-D	NPT	Without Drain	O-Ring	3299N115	0000
					AL30-D	NPT	Without Drain	O-Ring	3299N116	00000
					AL40-D, AL50-D, AL60-D	NPT	Without Drain	O-Ring	3299N118	00000


					Aluminum Bowl—Opaque with Sight Glass



							AL30-A	NPT, BSPP, BSPT	Without Drain	O-Ring	3299N16	00000


							AL30-D	NPT	Without Drain	O-Ring	3299N117	00000
							AL40-A, AL50-A	NPT, BSPP, BSPT	Without Drain	O-Ring	3299N17	00000
							AL40-D, AL50-D, AL60-D	NPT	Without Drain	O-Ring	3299N119	00000

SMC Modular Compressed Air Filter/Regulator/Lubricators (FRLs)

A combination of an SMC filter, regulator, and lubricator, these FRLs provide clean, lubricated air at your required pressure. They connect to other units of the same series with joiner clamps (sold separately)—even if the pipe sizes are slightly different—so you can customize your air preparation system. The regulator is relieving, so it exhausts when the downstream pressure exceeds the set pressure.

Their bowls have an automatic drain that periodically releases condensate into the air, eliminating the need for manual emptying. They come with mounting brackets so you can attach them to a wall or equipment. Add a safety lockout valve to prevent accidental start-ups during maintenance and comply with OSHA lockout/tagout regulations.

Series No. 10—Metric Female Inlet and Outlet


Inline with Clear Polycarbonate Bowl	Stacked with Clear Polycarbonate Bowl

Inline Components—Inline FRLs are the standard design. Each part can be replaced or repaired on its own, which reduces maintenance costs.

Stacked Components—Stacked FRLs have a filter and regulator joined top-to-bottom and a lubricator on the side. They require less horizontal space than inline FRLs.

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.

Compressed Air Filter/Regulator/Lubricators													Replacement Filter Bowls		Joiner Clamps
	Thread Size								Overall
Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Removes Particle Size Down To, μm	Pressure Regulation Range, psi	Includes	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each		Each







			Inline with Clear Polycarbonate Bowl and Automatic Drain

			AC10-A	M5 × 0.8 mm	M5 × 0.8 mm	6 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	0.24	4"	3 3/8"	8492T111	000000	3059N47	000000	8550T21	00000




					Stacked with Clear Polycarbonate Bowl and Automatic Drain

					AC10-A	M5 × 0.8 mm	M5 × 0.8 mm	6 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	0.24	4"	3 3/8"	8492T113	00000	3059N47	00000	8550T21	0000

Replacements for Compressed Air Filter/Regulator/Lubricators

		Each
Replacement Filter Element	6098K6	00000
Replacement Air Filter Seal for Series 10	3061N21	0000

Series No. 20—NPT Female Inlet and Outlet


Inline with Clear Polycarbonate Bowl	Inline with Opaque Aluminum Bowl	Stacked with Clear Polycarbonate Bowl	Stacked with Opaque Aluminum Bowl

Inline Components—Inline FRLs are the standard design. Each part can be replaced or repaired on its own, which reduces maintenance costs.

Stacked Components—Stacked FRLs have a filter and regulator joined top-to-bottom and a lubricator on the side. They require less horizontal space than inline FRLs.

Aluminum Bowl—Aluminum bowls are stronger than plastic bowls, so they won't crack or shatter if dropped.

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.

Compressed Air Filter/Regulator/Lubricators													Replacement Filter Bowls		Joiner Clamps
	Pipe Size								Overall
Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Removes Particle Size Down To, μm	Pressure Regulation Range, psi	Includes	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each		Each







			Inline with Clear Polycarbonate Bowl and Automatic Drain

			AC20-D	1/8	1/8	52 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	0.85	5 1/2"	5"	9138N111	0000000	8555N711	000000	8210N111	00000


			AC20-D	1/4	1/4	52 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	0.85	5 1/2"	5"	9138N112	000000	8555N711	00000	8210N111	0000




					Inline with Opaque Aluminum Bowl and Automatic Drain

					AC20-D	1/8	1/8	52 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	0.85	5 1/2"	5"	9138N113	000000	8555N712	00000	8210N111	0000


					AC20-D	1/4	1/4	52 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	0.85	5 1/2"	5"	9138N114	000000	8555N712	00000	8210N111	0000




							Stacked with Clear Polycarbonate Bowl and Automatic Drain

							AC20-D	1/8	1/8	52 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	0.85	7"	3 1/4"	9138N115	00000	8555N711	00000	8210N111	0000


							AC20-D	1/4	1/4	52 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	0.85	7"	3 1/4"	9138N116	00000	8555N711	00000	8210N111	0000




									Stacked with Opaque Aluminum Bowl and Automatic Drain

									AC20-D	1/8	1/8	52 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	0.85	7"	3 1/4"	9138N117	00000	8555N712	00000	8210N111	0000


									AC20-D	1/4	1/4	52 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	0.85	7"	3 1/4"	9138N118	00000	8555N712	00000	8210N111	0000

Accessories and Replacements for Compressed Air Filter/Regulator/Lubricators

Padlockable covers clamp over the regulator knob to prevent unauthorized pressure changes.

		Each
Replacement Air Filter Element for Series 20	8540T4	00000
Tamper-Resistant Padlockable Cover for Series 20	9239N11	0000
Replacement Air Filter Seal for Series 20	3061N11	0000

Series No. 20—BSPP Female Inlet and Outlet


Inline with Clear Polycarbonate Bowl	Stacked with Clear Polycarbonate Bowl

BSPP threads are also known as G threads.

Inline Components—Inline FRLs are the standard design. Each part can be replaced or repaired on its own, which reduces maintenance costs.

Stacked Components—Stacked FRLs have a filter and regulator joined top-to-bottom and a lubricator on the side. They require less horizontal space than inline FRLs.

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.

Compressed Air Filter/Regulator/Lubricators													Replacement Filter Bowls		Joiner Clamps
	Pipe Size								Overall
Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Removes Particle Size Down To, μm	Pressure Regulation Range, psi	Includes	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each		Each







			Inline with Clear Polycarbonate Bowl and Automatic Drain

			AC20-D	1/8	1/8	52 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	0.85	5 1/2"	5"	9138N119	0000000	8555N714	000000	8210N111	00000


			AC20-D	1/4	1/4	52 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	0.85	5 1/2"	5"	9138N12	000000	8555N714	00000	8210N111	0000




					Stacked with Clear Polycarbonate Bowl and Automatic Drain

					AC20-D	1/8	1/8	52 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	0.85	7"	3 1/4"	9138N121	00000	8555N714	00000	8210N111	0000


					AC20-D	1/4	1/4	52 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	0.85	7"	3 1/4"	9138N122	00000	8555N714	00000	8210N111	0000

Accessories and Replacements for Compressed Air Filter/Regulator/Lubricators

Padlockable covers clamp over the regulator knob to prevent unauthorized pressure changes.

		Each
Replacement Air Filter Element for Series 20	8540T4	00000
Tamper-Resistant Padlockable Cover for Series 20	9239N11	0000
Replacement Air Filter Seal for Series 20	3061N11	0000

Series No. 30—NPT Female Inlet and Outlet


Inline with Clear Polycarbonate Bowl	Inline with Opaque Aluminum Bowl	Stacked with Clear Polycarbonate Bowl	Stacked with Opaque Aluminum Bowl

Inline Components—Inline FRLs are the standard design. Each part can be replaced or repaired on its own, which reduces maintenance costs.

Stacked Components—Stacked FRLs have a filter and regulator joined top-to-bottom and a lubricator on the side. They require less horizontal space than inline FRLs.

Aluminum Bowl—Aluminum bowls are stronger than plastic bowls, so they won't crack or shatter if dropped.

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.

Compressed Air Filter/Regulator/Lubricators													Replacement Filter Bowls		Joiner Clamps
	Pipe Size								Overall
Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Removes Particle Size Down To, μm	Pressure Regulation Range, psi	Includes	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each		Each







			Inline with Clear Polycarbonate Bowl and Automatic Drain

			AC30-D	1/4	1/4	105 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	1.9	7 3/4"	6 5/8"	8803N655	0000000	8555N715	000000	8210N112	00000


			AC30-D	3/8	3/8	105 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	1.9	7 3/4"	6 5/8"	8803N656	000000	8555N715	00000	8210N112	0000




					Inline with Opaque Aluminum Bowl and Automatic Drain

					AC30-D	1/4	1/4	105 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	1.9	7 3/4"	6 5/8"	8803N657	000000	3059N38	00000	8210N112	0000


					AC30-D	3/8	3/8	105 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	1.9	7 3/4"	6 5/8"	8803N658	000000	3059N38	00000	8210N112	0000




							Stacked with Clear Polycarbonate Bowl and Automatic Drain

							AC30-D	1/4	1/4	105 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	1.9	9 5/8"	4 3/8"	8803N659	000000	8555N715	00000	8210N112	0000


							AC30-D	3/8	3/8	105 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	1.9	9 5/8"	4 3/8"	8803N661	000000	8555N715	00000	8210N112	0000




									Stacked with Opaque Aluminum Bowl and Automatic Drain

									AC30-D	1/4	1/4	105 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	1.9	9 5/8"	4 3/8"	8803N662	000000	3059N38	00000	8210N112	0000


									AC30-D	3/8	3/8	105 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	1.9	9 5/8"	4 3/8"	8803N663	000000	3059N38	00000	8210N112	0000

Accessories and Replacements for Compressed Air Filter/Regulator/Lubricators

Padlockable covers clamp over the regulator knob to prevent unauthorized pressure changes.

		Each
Replacement Air Filter Element for Series 30	8540T1	00000
Tamper-Resistant Padlockable Cover for Series 30	9239N12	0000
Replacement Air Filter Seal for Series 30	3061N12	0000

Series No. 30—BSPP Female Inlet and Outlet


Inline with Clear Polycarbonate Bowl	Stacked with Clear Polycarbonate Bowl

BSPP threads are also known as G threads.

Inline Components—Inline FRLs are the standard design. Each part can be replaced or repaired on its own, which reduces maintenance costs.

Stacked Components—Stacked FRLs have a filter and regulator joined top-to-bottom and a lubricator on the side. They require less horizontal space than inline FRLs.

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.

Compressed Air Filter/Regulator/Lubricators													Replacement Filter Bowls		Joiner Clamps
	Pipe Size								Overall
Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Removes Particle Size Down To, μm	Pressure Regulation Range, psi	Includes	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each		Each







			Inline with Clear Polycarbonate Bowl and Automatic Drain

			AC30-D	1/4	1/4	105 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	1.9	7 3/4"	6 5/8"	8803N664	0000000	8555N716	000000	8210N112	00000


			AC30-D	3/8	3/8	105 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	1.9	7 3/4"	6 5/8"	8803N665	000000	8555N716	00000	8210N112	0000




					Stacked with Clear Polycarbonate Bowl and Automatic Drain

					AC30-D	1/4	1/4	105 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	1.9	9 5/8"	4 3/8"	8803N666	000000	8555N716	00000	8210N112	0000


					AC30-D	3/8	3/8	105 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	1.9	9 5/8"	4 3/8"	8803N667	000000	8555N716	00000	8210N112	0000

Accessories and Replacements for Compressed Air Filter/Regulator/Lubricators

Padlockable covers clamp over the regulator knob to prevent unauthorized pressure changes.

		Each
Replacement Air Filter Element for Series 30	8540T1	00000
Tamper-Resistant Padlockable Cover for Series 30	9239N12	0000
Replacement Air Filter Seal for Series 30	3061N12	0000

Series No. 40—NPT Female Inlet and Outlet


Inline with Clear Polycarbonate Bowl	Inline with Opaque Aluminum Bowl	Stacked with Clear Polycarbonate Bowl	Stacked with Opaque Aluminum Bowl

Inline Components—Inline FRLs are the standard design. Each part can be replaced or repaired on its own, which reduces maintenance costs.

Stacked Components—Stacked FRLs have a filter and regulator joined top-to-bottom and a lubricator on the side. They require less horizontal space than inline FRLs.

Aluminum Bowl—Aluminum bowls are stronger than plastic bowls, so they won't crack or shatter if dropped.

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.

Compressed Air Filter/Regulator/Lubricators													Replacement Filter Bowls		Joiner Clamps
	Pipe Size								Overall
Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Removes Particle Size Down To, μm	Pressure Regulation Range, psi	Includes	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each		Each







			Inline with Clear Polycarbonate Bowl and Automatic Drain

			AC40-D	1/4	1/4	176 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	9 1/8"	8 5/8"	8760N21	0000000	8555N717	000000	8210N113	00000


			AC40-D	3/8	3/8	176 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	9 1/8"	8 5/8"	8760N22	000000	8555N717	00000	8210N113	0000
			AC40-D	1/2	1/2	176 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	9 1/8"	8 5/8"	8760N23	000000	8555N717	00000	8210N113	0000
			AC40-D	3/4	3/4	176 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	9 1/8"	8 5/8"	8760N24	000000	8555N717	00000	8210N114	00000




					Inline with Opaque Aluminum Bowl and Automatic Drain

					AC40-D	3/8	3/8	176 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	9 1/8"	8 5/8"	8760N25	000000	3059N43	00000	8210N113	0000


					AC40-D	1/2	1/2	176 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	9 1/8"	8 5/8"	8760N26	000000	3059N43	00000	8210N113	0000
					AC40-D	3/4	3/4	176 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	9 1/8"	8 5/8"	8760N27	000000	3059N43	00000	8210N114	00000




							Stacked with Clear Polycarbonate Bowl and Automatic Drain

							AC40-D	1/4	1/4	176 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	11"	5 3/4"	8760N28	000000	8555N717	00000	8210N113	0000


							AC40-D	3/8	3/8	176 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	11"	5 3/4"	8760N29	000000	8555N717	00000	8210N113	0000
							AC40-D	1/2	1/2	176 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	11"	5 3/4"	8760N31	000000	8555N717	00000	8210N113	0000
							AC40-D	3/4	3/4	176 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	11"	5 3/4"	8760N32	000000	8555N717	00000	8210N114	00000




									Stacked with Opaque Aluminum Bowl and Automatic Drain

									AC40-D	3/8	3/8	176 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	11"	5 3/4"	8760N33	000000	3059N43	00000	8210N113	0000


									AC40-D	1/2	1/2	176 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	11"	5 3/4"	8760N34	000000	3059N43	00000	8210N113	0000
									AC40-D	3/4	3/4	176 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	11"	5 3/4"	8760N35	000000	3059N43	00000	8210N114	00000

Accessories and Replacements for Compressed Air Filter/Regulator/Lubricators

Padlockable covers clamp over the regulator knob to prevent unauthorized pressure changes.

		Each
Replacement Air Filter Element for Series 40	8540T2	00000
Tamper-Resistant Padlockable Cover for Series 40	9239N13	0000
Replacement Air Filter Seal for Series 40, 50, and 60	3061N13	0000

Series No. 40—BSPP Female Inlet and Outlet


Inline with Clear Polycarbonate Bowl	Stacked with Clear Polycarbonate Bowl

BSPP threads are also known as G threads.

Inline Components—Inline FRLs are the standard design. Each part can be replaced or repaired on its own, which reduces maintenance costs.

Stacked Components—Stacked FRLs have a filter and regulator joined top-to-bottom and a lubricator on the side. They require less horizontal space than inline FRLs.

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.

Compressed Air Filter/Regulator/Lubricators													Replacement Filter Bowls		Joiner Clamps
	Pipe Size								Overall
Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Removes Particle Size Down To, μm	Pressure Regulation Range, psi	Includes	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each		Each







			Inline with Clear Polycarbonate Bowl and Automatic Drain

			AC40-D	3/8	3/8	176 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	9 1/8"	8 5/8"	8760N36	0000000	8555N718	000000	8210N113	00000


			AC40-D	1/2	1/2	176 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	9 1/8"	8 5/8"	8760N37	000000	8555N718	00000	8210N113	0000




					Stacked with Clear Polycarbonate Bowl and Automatic Drain

					AC40-D	3/8	3/8	176 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	11"	5 3/4"	8760N38	000000	8555N718	00000	8210N113	0000


					AC40-D	1/2	1/2	176 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	11"	5 3/4"	8760N39	000000	8555N718	00000	8210N113	0000

Accessories and Replacements for Compressed Air Filter/Regulator/Lubricators

Padlockable covers clamp over the regulator knob to prevent unauthorized pressure changes.

		Each
Replacement Air Filter Element for Series 40	8540T2	00000
Tamper-Resistant Padlockable Cover for Series 40	9239N13	0000
Replacement Air Filter Seal for Series 40, 50, and 60	3061N13	0000

Series No. 50—NPT Female Inlet and Outlet


Inline with Clear Polycarbonate Bowl	Inline with Opaque Aluminum Bowl	Stacked with Clear Polycarbonate Bowl

Inline Components—Inline FRLs are the standard design. Each part can be replaced or repaired on its own, which reduces maintenance costs.

Stacked Components—Stacked FRLs have a filter and regulator joined top-to-bottom and a lubricator on the side. They require less horizontal space than inline FRLs.

Aluminum Bowl—Aluminum bowls are stronger than plastic bowls, so they won't crack or shatter if dropped.

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.

Compressed Air Filter/Regulator/Lubricators													Replacement Filter Bowls		Joiner Clamps
	Pipe Size								Overall
Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Removes Particle Size Down To, μm	Pressure Regulation Range, psi	Includes	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each		Each







			Inline with Clear Polycarbonate Bowl and Automatic Drain

			AC50-D	3/4	3/4	353 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	12 1/8"	11 1/8"	9902N753	0000000	8555N717	000000	8210N115	000000


			AC50-D	1	1	353 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	12 1/8"	11 1/8"	9902N754	000000	8555N717	00000	8210N115	00000




					Inline with Opaque Aluminum Bowl and Automatic Drain

					AC50-D	3/4	3/4	353 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	12 1/8"	11 1/8"	9902N755	000000	3059N43	00000	8210N115	00000


					AC50-D	1	1	353 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	12 1/8"	11 1/8"	9902N756	000000	3059N43	00000	8210N115	00000




							Stacked with Clear Polycarbonate Bowl and Automatic Drain

							AC50-D	3/4	3/4	353 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	16 7/8"	7 1/2"	9902N757	000000	8555N717	00000	8210N115	00000


							AC50-D	1	1	353 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	16 7/8"	7 1/2"	9902N758	000000	8555N717	00000	8210N115	00000

Accessories and Replacements for Compressed Air Filter/Regulator/Lubricators

Padlockable covers clamp over the regulator knob to prevent unauthorized pressure changes.

		Each
Replacement Air Filter Element for Series 50	8540T3	000000
Tamper-Resistant Padlockable Cover for Series 50 and 60	9239N14	00000
Replacement Air Filter Seal for Series 40, 50, and 60	3061N13	0000

Series No. 60—NPT Female Inlet and Outlet


Inline with Clear Polycarbonate Bowl	Inline with Opaque Aluminum Bowl	Stacked with Clear Polycarbonate Bowl

Inline Components—Inline FRLs are the standard design. Each part can be replaced or repaired on its own, which reduces maintenance costs.

Stacked Components—Stacked FRLs have a filter and regulator joined top-to-bottom and a lubricator on the side. They require less horizontal space than inline FRLs.

Aluminum Bowl—Aluminum bowls are stronger than plastic bowls, so they won't crack or shatter if dropped.

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.

Compressed Air Filter/Regulator/Lubricators													Replacement Filter Bowls		Joiner Clamps
	Pipe Size								Overall
Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Removes Particle Size Down To, μm	Pressure Regulation Range, psi	Includes	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each		Each







			Inline with Clear Polycarbonate Bowl and Automatic Drain

			AC60-D	1	1	423 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	12 5/8"	11 3/4"	8862N215	0000000	8555N717	000000	8210N115	000000




					Inline with Opaque Aluminum Bowl and Automatic Drain

					AC60-D	1	1	423 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	12 5/8"	11 3/4"	8862N216	000000	3059N43	00000	8210N115	00000




							Stacked with Clear Polycarbonate Bowl and Automatic Drain

							AC60-D	1	1	423 scfm @ 100 psi	145	5	7.25 to 123	Mounting Bracket	4.6	16 7/8"	7 3/4"	8862N217	000000	8555N717	00000	8210N115	00000

Accessories and Replacements for Compressed Air Filter/Regulator/Lubricators

Padlockable covers clamp over the regulator knob to prevent unauthorized pressure changes.

		Each
Tamper-Resistant Padlockable Cover for Series 50 and 60	9239N14	000000
Replacement Air Filter Seal for Series 40, 50, and 60	3061N13	0000

SMC Compressed Air Lubricator Sight Domes

Replace a cracked or lost sight dome on your SMC compressed air lubricator. These sight domes let you keep an eye on how much lubricant is entering your air line. All come with an O-ring to ensure a tight seal.

	Material	Includes		Each
For Series No. 10



	AL10-A	Polycarbonate	O-Ring	3303N101	00000


	For Series No. 20, 30, 40, 50, and 60



			AL20-A, AL20-D, AL30-A, AL30-D, AL40-A, AL40-D, AL50-A, AL50-D, AL60-A, AL60-D	Polycarbonate	O-Ring	3303N11	0000

Compressed Air Filter/Regulator/Lubricators (FRLs) with Push-to-Connect Fittings

A filter, regulator, and lubricator in one, these FRLs provide clean, lubricated air at your required pressure. No need for pipe nipples or joiner clamps to install—just push your air line into the fittings to create an airtight seal. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure. The filter’s bowl is fitted with an automatic drain that periodically vents condensate into the air.

Series No. 10—Female Inlet and Outlet

Image of Product. Front orientation. Compressed Air Filter/Regulator/Lubricators. Compressed Air Filter/Regulator/Lubricators (FRLs) with Push-to-Connect Fittings , Inline Components.

Inline Components

Inline Components—Inline FRLs are the standard design. Each part can be replaced or repaired on its own, which reduces maintenance costs.

Compressed Air Filter/Regulator/Lubricators												Replacement Filter Bowls
	For Tube OD							Overall
Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Removes Particle Size Down To, μm	Pressure Regulation Range, psi	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each







			Inline with Clear Polycarbonate Bowl and Automatic Drain

			AC10-A	1/8"	1/8"	5 scfm @ 100 psi	145	5	7 to 101	0.24	4 1/8"	3 1/2"	8419T1	000000	3059N47	000000

Replacements for Compressed Air Filter/Regulator/Lubricators

		Each
Replacement Filter Element	6098K6	00000
Replacement Air Filter Seal for Series 10	3061N21	0000

Series No. 20—Female Inlet and Outlet


Inline Components	Stacked Components

Inline Components—Inline FRLs are the standard design. Each part can be replaced or repaired on its own, which reduces maintenance costs.

Stacked Components—Stacked FRLs have a filter and regulator joined top-to-bottom and a lubricator on the side. They require less horizontal space than inline FRLs.

Compressed Air Filter/Regulator/Lubricators												Replacement Filter Bowls
	For Tube OD							Overall
Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Removes Particle Size Down To, μm	Pressure Regulation Range, psi	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each







			Inline with Clear Polycarbonate Bowl and Automatic Drain

			AC20-D	1/4"	1/4"	52 scfm @ 100 psi	145	5	7.25 to 123	0.85	5 5/8"	6 1/8"	8943N11	0000000	8555N711	000000


			AC20-D	3/8"	3/8"	52 scfm @ 100 psi	145	5	7.25 to 123	0.85	5 5/8"	6 5/8"	8943N12	000000	8555N711	00000




					Stacked with Clear Polycarbonate Bowl and Automatic Drain

					AC20-D	1/8"	1/8"	52 scfm @ 100 psi	145	5	7.25 to 123	0.85	6 7/8"	4 1/8"	8943N14	00000	8555N711	00000


					AC20-D	1/4"	1/4"	52 scfm @ 100 psi	145	5	7.25 to 123	0.85	6 7/8"	4 1/2"	8943N15	00000	8555N711	00000
					AC20-D	3/8"	3/8"	52 scfm @ 100 psi	145	5	7.25 to 123	0.85	6 7/8"	4 1/2"	8943N16	000000	8555N711	00000

Replacements for Compressed Air Filter/Regulator/Lubricators

Series No. 30—Female Inlet and Outlet


Inline Components	Stacked Components

Inline Components—Inline FRLs are the standard design. Each part can be replaced or repaired on its own, which reduces maintenance costs.

Stacked Components—Stacked FRLs have a filter and regulator joined top-to-bottom and a lubricator on the side. They require less horizontal space than inline FRLs.

Compressed Air Filter/Regulator/Lubricators												Replacement Filter Bowls
	For Tube OD							Overall
Mfr. Series	Inlet	Outlet	Max. Flow Rate @ Pressure	Max. Pressure, psi	Removes Particle Size Down To, μm	Pressure Regulation Range, psi	Lubricant Cap., fl. oz.	Ht.	Wd.		Each		Each







			Inline with Clear Polycarbonate Bowl and Automatic Drain

			AC30-D	1/2"	1/2"	105 scfm @ 100 psi	145	5	7.25 to 123	1.9	7 7/8"	8 3/8"	8943N13	0000000	8555N715	000000




					Stacked with Clear Polycarbonate Bowl and Automatic Drain

					AC30-D	1/2"	1/2"	105 scfm @ 100 psi	145	5	7.25 to 123	1.9	9 1/2"	5 3/4"	8943N17	000000	8555N715	00000

Replacements for Compressed Air Filter/Regulator/Lubricators

Pressure Switches for SMC Modular Filter/Regulator/Lubricators (FRLs)

Connect these switches to your SMC filter/regulator/lubricator (FRL) to monitor air pressure and send signals to controllers or other equipment. When they reach a set pressure, they can turn machines on or off, sound alarms, or trigger automated controls. These switches are single pole, single throw (SPST) and normally open, so they’re dependable and simple to use. Choose a switch in the same series as your FRL.

Joiner Clamps—Joiner clamps (sold separately) create compact, airtight connections that are easy to swap out. They come with mounting brackets.

Pressure Switches																Joiner Clamps
										Overall
For Mfr. Series	For Pipe Size	Input Voltage	Pressure Set Point Range, psi	Approx. Difference Between Set Point and Reset Point, psi	Max. Continuous Pressure, psi	Max. Short-Term Pressure, psi	Accuracy	Max. Switching Current @ Voltage	Process Temp. Range, ° F	Wd.	Ht.	Includes	Enclosure Rating		Each		Each
AC20-D	1/4	100V AC, 100V DC	15 to 87	11.6	100	145	±8.3%	20 mA @ 100V AC 20 mA @ 100V DC 40 mA @ 48V AC 40 mA @ 48V DC 50 mA @ 24V AC 50 mA @ 24V DC	25 to 140	1 1/8"	3 1/8"	Mounting Bracket	IP40	8713N11	000000	8210N111	00000
AC30-D	1/4	100V AC, 100V DC	15 to 87	11.6	100	145	±8.3%	20 mA @ 100V AC 20 mA @ 100V DC 40 mA @ 48V AC 40 mA @ 48V DC 50 mA @ 24V AC 50 mA @ 24V DC	25 to 140	1 1/4"	3 3/8"	Mounting Bracket	IP40	8713N12	00000	8210N112	0000
AC30-D	3/8	100V AC, 100V DC	15 to 87	11.6	100	145	±8.3%	20 mA @ 100V AC 20 mA @ 100V DC 40 mA @ 48V AC 40 mA @ 48V DC 50 mA @ 24V AC 50 mA @ 24V DC	25 to 140	1 1/4"	3 3/8"	Mounting Bracket	IP40	8713N13	00000	8210N112	0000
AC40-D	3/8	100V AC, 100V DC	15 to 87	11.6	100	145	±8.3%	20 mA @ 100V AC 20 mA @ 100V DC 40 mA @ 48V AC 40 mA @ 48V DC 50 mA @ 24V AC 50 mA @ 24V DC	25 to 140	1 1/2"	3 11/16"	Mounting Bracket	IP40	8713N14	00000	8210N113	0000
AC40-D	1/2	100V AC, 100V DC	15 to 87	11.6	100	145	±8.3%	20 mA @ 100V AC 20 mA @ 100V DC 40 mA @ 48V AC 40 mA @ 48V DC 50 mA @ 24V AC 50 mA @ 24V DC	25 to 140	1 1/2"	3 11/16"	Mounting Bracket	IP40	8713N15	00000	8210N113	0000

Manifolds for SMC Modular Compressed Air Filter/Regulator/Lubricators (FRLs)


Manifolds	Manifolds with 2 Gauge Ports

Distribute compressed air to multiple locations from a single source. These manifolds connect with SMC modular components that have the same manufacturer series.

Filter/Regulator/Lubricator Joiner Clamps—Use joiner clamps to connect manifolds to another SMC modular unit with the same series number.

	Compressed Air Filter/Regulator/Lubricator Manifolds															Filter/Regulator/Lubricator Joiner Clamps
				Branching Outlet		Gauge Ports
	For Mfr. Series	Total No. of Outlets	No. of Inline Outlets	Pipe Size (No. of)	Thread Type	Pipe Size	Thread Type	Max. Pressure, psi	Max. Temp., ° F	Lg.	Wd.	Ht.	Material		Each		Each
Manifolds



		AC20-D	2	1	1/8 (1)	NPT	—	—	145	140	1 11/16"	1 1/8"	1 7/16"	Aluminum	8205N111	000000	8210N111	00000


		AC20-D	2	1	1/4 (1)	NPT	—	—	145	140	1 11/16"	1 1/8"	1 7/16"	Aluminum	8205N112	00000	8210N111	0000
		AC30-D	2	1	1/4 (1)	NPT	—	—	145	140	2 1/8"	1 1/4"	1 3/4"	Aluminum	8205N113	00000	8210N112	0000
		AC30-D	2	1	3/8 (1)	NPT	—	—	145	140	2 1/8"	1 1/4"	1 3/4"	Aluminum	8205N114	00000	8210N112	0000
		AC40-D	2	1	3/8 (1)	NPT	—	—	145	140	2 13/16"	1 9/16"	2 1/16"	Aluminum	8205N115	00000	8210N113	0000
		AC40-D	2	1	1/2 (1)	NPT	—	—	145	140	2 13/16"	1 9/16"	2 1/16"	Aluminum	8205N116	00000	8210N113	0000
		AC50-D, AC60-D	2	1	3/4 (1)	NPT	—	—	145	140	3 9/16"	2 1/2"	2 9/16"	Aluminum	8205N117	00000	8210N115	00000


		Manifolds with 2 Gauge Ports



				AC20-D	3	1	1/8 (2)	NPT	1/8	NPT	145	140	1 11/16"	1 1/8"	1 7/16"	Aluminum	8205N118	0000	8210N111	0000


				AC20-D	3	1	1/4 (2)	NPT	1/8	NPT	145	140	1 11/16"	1 1/8"	1 7/16"	Aluminum	8205N119	0000	8210N111	0000
				AC30-D	3	1	1/4 (2)	NPT	1/8	NPT	145	140	2 1/8"	1 1/4"	1 3/4"	Aluminum	8205N121	0000	8210N112	0000
				AC30-D	3	1	3/8 (2)	NPT	1/8	NPT	145	140	2 1/8"	1 1/4"	1 3/4"	Aluminum	8205N122	0000	8210N112	0000
				AC40-D	3	1	3/8 (2)	NPT	1/8	NPT	145	140	2 13/16"	1 9/16"	2 1/16"	Aluminum	8205N123	0000	8210N113	0000
				AC40-D	3	1	1/2 (2)	NPT	1/8	NPT	145	140	2 13/16"	1 9/16"	2 1/16"	Aluminum	8205N124	00000	8210N113	0000