For technical drawings and 3-D models, click on a part number.

These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights. They have a durable glass lens that's sealed to keep out fluids, chips, and shavings, so they can be mounted directly inside machines. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a cool or daylight appearance that highlights white/blue tones, which is good for inspecting.

IP65 lights are dust tight and protect against low-pressure washdowns, such as water from a garden hose. IP67 lights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments.

Bases allow you to convert Style A lights with a 24" arm reach and Style C lights from a fastener mount to a clamp-on or magnetic mount.

Power supplies, also known as transformers, convert your facility's 120 or 240 AC voltage into 24V DC voltage.

Gooseneck arms can be repositioned faster and more easily than articulating arms. Mount these lights directly inside machines—they have a heat- and chemical-resistant glass lens that's sealed to keep out fluids, chips, and shavings. They’re rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

Power supplies, also known as transformers, are for use on the hardwire lights to convert your facility's 120 or 240 AC voltage into 24 DC voltage. They cannot be sold to California or Vermont due to local energy efficiency requirements.

Create a high-intensity lighting system for inspecting small and microscopic parts. To create a complete lighting system, you need a fiber-optic light, fiber-optic cable, and an adapter to connect the cable to the light. They cast a neutral white light often found in workspaces.

Add a probe to 1/8" dia. fiber-optic cables to illuminate small areas that have recessed or deep orifices.

Pair a focusing lens with a positionable cable to create a concentrated beam of light on your work.

Though not as bright as our miniature fiber-optic lights, these lights have built-in LEDs that last longer, are more efficient, and are more affordable. Use them to illuminate small and microscopic parts. They have a daylight appearance that highlights white/blue tones, which is good for inspecting.

Shine light into hard-to-reach spaces with these flexible-arm flashlights. All have a long-lasting, built-in LED that is more efficient and generates less heat than other light technologies. These flashlights cast a flood beam that creates a uniform spread of light. This is especially good for close-up tasks and inspection work. Use the momentary light setting when you need light for brief periods—the light only turns on when the button is held down. Rated IP04, they withstand liquid splashed from all angles. Their body is knurled for a nonslip grip. All lights meet ANSI/Plato FL 1, so you'll know they meet performance standards for impact resistance, run time, and beam distance.

Free your hands for other work by mounting a flashlight (not included) to a nearby surface.

Clamp-on mounts hug table edges and other surfaces up to 2" thick. Tighten them as needed for a secure hold.

Clip-on mounts grab onto surfaces with a mounting clip, so they’re easy to move around your workspace.

Magnetic mounts quickly snap onto metal surfaces, making them easy to place, remove, and reinstall.

Shine light into hard-to-reach spaces in extreme environments like oil refineries or chemical plants. These flashlights are intrinsically safe, so they won’t spark. They meet NEC standards to reduce the risk of explosions. Make sure they match the hazardous environmental rating of your facility—they’re rated NEC Class I, Division I Groups A, B, C, and D. They’re also rated IP04, so they’ll seal out humidity and liquid from all angles.

Shine them continuously or use the momentary light setting to shine the light only while holding down the button. You’ll keep a firm grip on these lights thanks to their knurled texture.

Flashlights that meet ANSI/Plato FL 1 are tested to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Wear a flashlight around your neck to keep your hands free. These lights are great when you need to wear a brimmed hat or other head gear that would interfere with a headlamp. Bend and angle the adjustable arms and they’ll stay in place. You can also wrap them around nearby objects and point them where you need light. They flood the area with a uniform beam, which is particularly good for up-close and inspection tasks.

Compared to other dock lights that can only adjust vertically and horizontally, these lights bend at any angle to direct light exactly where it's needed. They have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. These lights emit a neutral white light often found in workspaces.

For technical drawings and 3-D models, click on a part number.

A flexible design allows these lights to be suspended above, wrapped around, or routed through areas on the job site. They have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. Lights produce a daylight appearance that highlights white/blue tones, which is good for inspecting. For indoor use.