Convert from one square drive size to another.

These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.

Attach one of these adapters to a socket to turn it with an open-end or box wrench.

Made of aluminum-bronze, these extensions satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Bend these extensions around obstructions to turn hard-to-reach fasteners.

Lock your socket into the extension to prevent accidental disengagement.

Set a desired torque within the range.

A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.

Fit these adapters between your wrench and socket to enable finger tightening.

Use sockets with tools that accept hex shanks, such as impact drivers and power drills.

Convert from one square drive size to another.

Pivot the head to access fasteners from an angle.

Lock your socket into the extension to prevent accidental disengagement.

Convert from one square drive size to another.

A ratchet mechanism allows you to turn fasteners without removing and repositioning the wrench.

The shaft on these wrenches extends and locks.

Twist the grip to rapidly turn a socket before final tightening or to remove a fastener once loosened. The handle also swings like a traditional ratchet wrench.

A gasket seals in permanent lubrication and keeps out dirt, dust, and moisture.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

The 20° offset head provides clearance when reaching over obstructions.

Pivot the head to access fasteners in tight spots.

Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.

Use these tools for general shop applications.

Lock your bit into the adapter to prevent accidental disengagement. These adapters attach to square-drive tools.

Adapt your USB port to connect to a variety of other devices.

Power up mobile devices and other electronics.

Power devices that have a straight-blade connection from a vehicle outlet.

Use foreign devices in American outlets and American devices in foreign outlets.

Connect multiple devices from a single outlet.

Made with industry standard barrel-style ends, these connectors carry DC power between electronic devices and power supplies.

To save space and reduce the number of cords in industrial automation setups, these splitters join two devices with M12 connectors to a single cord, distribution block, or I/O module with M12 connectors.

Reduce the number of cords needed to send and receive signals where space is tight.

Simplify wiring and reduce the number of cords in your automation setup.

Extend an audio connection by plugging a cord into each end of these adapters.