Filter by
For Use With
Actuation
Body Material
Air Directional Control Valve Flow Pattern
Fitting Connection
Valve Function
Valve Position
Maximum Pressure @ Temperature
Inlet Connection
Actuation Type
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Compact Solenoid On/Off Valves with Push-to-Connect Fittings
 |
Insert tubing into the fittings on these valves—no heat, solder, or flux required. They operate on electricity to automatically start and stop flow.
Valves are fail closed unless actuated. They don’t require a minimum pressure drop between the inlet and outlet for operation. The actuator is directly mounted to the valve body to minimize movement and reduce wear.
Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For Tube OD | Gender | Flow Coefficient (Cv) | Max. Pressure @ Temp. | Valve Type | Manual Override | Temp. Range, ° F | Seal Material | Valve Lg. | Overall Ht. | Quick-Disconnect Tab Wd. | Certification | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Polycarbonate Body with Quick-Disconnect-Terminal Wire Connection | |||||||||||||||
Fail Closed—24V DC | |||||||||||||||
| 1/4" | Female | 0.314 | 80 psi @ 70° F | Zero Pressure Drop, Solenoid | No | -10 to 100 | Buna-N | 2" | 3" | 1/4" | CSA Certified | 5489T433 | 0000000 | ||
| 1/4" | Female | 0.367 | 40 psi @ 70° F | Zero Pressure Drop, Solenoid | No | -10 to 100 | Buna-N | 2" | 3" | 1/4" | CSA Certified | 5489T453 | 000000 | ||
| 3/8" | Female | 1 | 5 psi @ 70° F | Zero Pressure Drop, Solenoid | No | -10 to 100 | Buna-N | 2 3/8" | 3" | 1/4" | CSA Certified | 5489T493 | 000000 | ||
Fail Closed—120V AC | |||||||||||||||
| 1/4" | Female | 0.314 | 80 psi @ 70° F | Zero Pressure Drop, Solenoid | No | -10 to 100 | Buna-N | 2" | 3" | 1/4" | CSA Certified | 5489T431 | 000000 | ||
| 1/4" | Female | 0.367 | 40 psi @ 70° F | Zero Pressure Drop, Solenoid | No | -10 to 100 | Buna-N | 2" | 3" | 1/4" | CSA Certified | 5489T451 | 000000 | ||
| 3/8" | Female | 1 | 5 psi @ 70° F | Zero Pressure Drop, Solenoid | No | -10 to 100 | Buna-N | 2 3/8" | 3" | 1/4" | CSA Certified | 5489T491 | 000000 | ||
Polysulfone Body with Quick-Disconnect-Terminal Wire Connection | |||||||||||||||
Fail Closed—24V DC | |||||||||||||||
| 1/4" | Female | 0.228 | 120 psi @ 70° F | Zero Pressure Drop, Solenoid | No | -10 to 100 | Buna-N | 2" | 3" | 1/4" | CSA Certified | 5489T413 | 000000 | ||
Fail Closed—120V AC | |||||||||||||||
| 1/4" | Female | 0.228 | 120 psi @ 70° F | Zero Pressure Drop, Solenoid | No | -10 to 100 | Buna-N | 2" | 3" | 1/4" | CSA Certified | 5489T411 | 000000 | ||
Solenoid Diverting Valves for Chemicals
 |  |
Often used for chemical analysis and other laboratory testing, these valves have a PTFE seal and body to withstand aggressive and corrosive solutions. All operate on electricity to automatically divert flow between ports. They do not require a pressure drop for operation. Any port can be used as an inlet or an outlet. Valves can direct flow from the inlet port to either outlet port. They cannot shut off flow. The actuator is mounted directly to the valve body to minimize movement and reduce wear.
Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Mounting Holes | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Thread Size | Diverting Valve Flow Pattern | Flow Coefficient (Cv) | Max. Pressure @ Temp. | Valve Type | Min. Pressure Drop Req. | Temp. Range, ° F | Actuation Time, sec. | Valve Lg. | Overall Ht. | Mounting Fasteners Included | No. of | Thread Size | For Use With | Seal Material | Each | |||
PTFE Body with Wire Leads—12V DC | |||||||||||||||||||
NPSM Female × NPSM Female × NPSM Female | |||||||||||||||||||
| 1/8 | — | L-Pattern | 15.85 | 30 psi @ 70° F | Solenoid, Zero Pressure Drop | None | 35 to 155 | 0.04 | 1 3/4" | 2" | No | 7 | 4-40 | Acetone, Air, Ammonia, Argon, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Helium, Hydrochloric Acid, Krypton, Methanol (Methyl Alcohol), Neon, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Salt Water, Sulfuric Acid, Water, Xenon, Xylene | PTFE | 2552N16 | 0000000 | ||
UNF Female × UNF Female × UNF Female | |||||||||||||||||||
| — | 1/4"-28 | L-Pattern | 10.57 | 30 psi @ 70° F | Solenoid, Zero Pressure Drop | None | 35 to 155 | 0.02 | 1 1/2" | 1 13/16" | No | 7 | 4-40 | Acetone, Air, Ammonia, Argon, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Helium, Hydrochloric Acid, Krypton, Methanol (Methyl Alcohol), Neon, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Salt Water, Sulfuric Acid, Water, Xenon, Xylene | PTFE | 2552N15 | 000000 | ||
| — | 10-32 | L-Pattern | 2.64 | 30 psi @ 70° F | Solenoid, Zero Pressure Drop | None | 35 to 155 | 0.02 | 3/4" | 1 3/16" | No | 5 | 2-56 | Acetone, Air, Ammonia, Argon, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Helium, Hydrochloric Acid, Krypton, Methanol (Methyl Alcohol), Neon, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Salt Water, Sulfuric Acid, Water, Xenon, Xylene | PTFE | 2552N14 | 000000 | ||
PTFE Body with Wire Leads—24V DC | |||||||||||||||||||
NPSM Female × NPSM Female × NPSM Female | |||||||||||||||||||
| 1/8 | — | L-Pattern | 15.85 | 30 psi @ 70° F | Solenoid, Zero Pressure Drop | None | 35 to 155 | 0.04 | 1 3/4" | 2" | No | 7 | 4-40 | Acetone, Air, Ammonia, Argon, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Helium, Hydrochloric Acid, Krypton, Methanol (Methyl Alcohol), Neon, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Salt Water, Sulfuric Acid, Water, Xenon, Xylene | PTFE | 2552N13 | 000000 | ||
UNF Female × UNF Female × UNF Female | |||||||||||||||||||
| — | 1/4"-28 | L-Pattern | 10.57 | 30 psi @ 70° F | Solenoid, Zero Pressure Drop | None | 35 to 155 | 0.02 | 1 1/2" | 1 13/16" | No | 7 | 4-40 | Acetone, Air, Ammonia, Argon, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Helium, Hydrochloric Acid, Krypton, Methanol (Methyl Alcohol), Neon, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Salt Water, Sulfuric Acid, Water, Xenon, Xylene | PTFE | 2552N12 | 000000 | ||
| — | 10-32 | L-Pattern | 2.64 | 30 psi @ 70° F | Solenoid, Zero Pressure Drop | None | 35 to 155 | 0.02 | 3/4" | 1 3/16" | No | 5 | 2-56 | Acetone, Air, Ammonia, Argon, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Helium, Hydrochloric Acid, Krypton, Methanol (Methyl Alcohol), Neon, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Salt Water, Sulfuric Acid, Water, Xenon, Xylene | PTFE | 2552N11 | 000000 | ||
Electrically Operated Air Directional Control Valves with Flow Control
Push-to-Connect Male Inlet x Push-to-Connect Male Outlet
 |  |
Single Solenoid | Double Solenoid |
5/3 (Closed Center) Flow Pattern—5/3 (closed center) valves close all ports in the off position to stop equipment in a locked position with air pressure holding it in place.
5/3 (Pressure Center) Flow Pattern—5/3 (pressure center) valves create two actions at the same time, such as extending two single-acting cylinders at once.
Spring Return—Valves with spring return actuation go back to their original position when voltage is removed.
Solenoid Return—Valves with solenoid return actuation go back to their original position when voltage is moved from the first solenoid to the second solenoid.
Flow Coefficient (Cv)—Flow coefficient (Cv) indicates how much airflow can pass through a valve.
Valves | Replacement Solenoids | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet | Outlet | Overall | ||||||||||||||||||
No. of Flow Ports | For Tube OD | For Tube ID | For Tube ID | For Tube OD | Exhaust Connection | Max. Flow Rate @ 100 psi, scfm | Flow Coefficient (Cv) | Pressure Range, psi | Vacuum Rating | Lg. | Wd. | Ht. | Mounting Fasteners Included | Choose a Voltage | Each | Each | ||||
5/2 Flow Pattern | ||||||||||||||||||||
Single Solenoid—Spring Return | ||||||||||||||||||||
| 5 | 1/4" | 11/64" | 11/64" | 1/4" | Threaded | 24.7 | 0.7 | 20 to 150 | Not Rated | 4 3/4" | 1 3/8" | 2 3/4" | No | 24V DC | 4666A71 | 0000000 | 4666A61 | 0000000 | ||
| 5 | 1/4" | 11/64" | 11/64" | 1/4" | Threaded | 24.7 | 0.7 | 20 to 150 | Not Rated | 4 3/4" | 1 3/8" | 2 3/4" | No | 120V AC | 4666A72 | 000000 | 4666A62 | 000000 | ||
| 5 | 3/8" | 1/4" | 1/4" | 3/8" | Threaded | 24.7 | 0.7 | 20 to 150 | Not Rated | 4 3/4" | 1 3/8" | 2 3/4" | No | 24V DC | 4666A21 | 000000 | 4666A61 | 000000 | ||
| 5 | 3/8" | 1/4" | 1/4" | 3/8" | Threaded | 24.7 | 0.7 | 20 to 150 | Not Rated | 4 3/4" | 1 3/8" | 2 3/4" | No | 120V AC | 4666A22 | 000000 | 4666A62 | 000000 | ||
Double Solenoid—Solenoid Return | ||||||||||||||||||||
| 5 | 1/4" | 11/64" | 11/64" | 1/4" | Threaded | 24.7 | 0.7 | 20 to 150 | Not Rated | 7 3/8" | 1 3/8" | 2 3/4" | No | 24V DC, 120V AC | 4666A5 | 000000 | ——— | 0 | ||
| 5 | 3/8" | 1/4" | 1/4" | 3/8" | Threaded | 24.7 | 0.7 | 20 to 150 | Not Rated | 7 3/8" | 1 3/8" | 2 3/4" | No | 24V DC, 120V AC | 4666A1 | 000000 | ——— | 0 | ||
5/3 (Closed Center) Flow Pattern | ||||||||||||||||||||
Double Solenoid—Solenoid Return | ||||||||||||||||||||
| 5 | 1/4" | 11/64" | 11/64" | 1/4" | Threaded | 24.7 | 0.7 | 20 to 150 | Not Rated | 7 3/8" | 1 3/8" | 2 3/4" | No | 24V DC, 120V AC | 4666A8 | 000000 | ——— | 0 | ||
| 5 | 3/8" | 1/4" | 1/4" | 3/8" | Threaded | 24.7 | 0.7 | 20 to 150 | Not Rated | 7 3/8" | 1 3/8" | 2 3/4" | No | 24V DC, 120V AC | 4666A3 | 000000 | ——— | 0 | ||
5/3 (Pressure Center) Flow Pattern | ||||||||||||||||||||
Double Solenoid—Solenoid Return | ||||||||||||||||||||
| 5 | 1/4" | 11/64" | 11/64" | 1/4" | Threaded | 24.7 | 0.7 | 20 to 150 | Not Rated | 7 3/8" | 1 3/8" | 2 3/4" | No | 24V DC, 120V AC | 4666A9 | 000000 | ——— | 0 | ||
| 5 | 3/8" | 1/4" | 1/4" | 3/8" | Threaded | 24.7 | 0.7 | 20 to 150 | Not Rated | 7 3/8" | 1 3/8" | 2 3/4" | No | 24V DC, 120V AC | 4666A4 | 000000 | ——— | 0 | ||
Solenoid On/Off Valves for Chemicals
Dark Gray PVC Body with DIN A Connection
 |  |
Assembled View | Exploded View |
Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Mounting Slots | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure @ Temp. | Valve Type | Temp. Range, ° F | Valve Lg. | Overall Ht. | No. of | Lg. | Fasteners Included | Enclosure Rating | Certification | Each | |||
Fail Closed—120V AC | |||||||||||||||||
| 1/2 | Female | NPT | 2.3 | 120 psi @ 70° F | Zero Pressure Drop, Solenoid | 35 to 140 | 5 1/2" | 6 3/8" | 2 | 1/4" | No | NEMA 4 | CSA Certified | 4744K24 | 0000000 | ||
| 3/4 | Female | NPT | 3.2 | 120 psi @ 70° F | Zero Pressure Drop, Solenoid | 35 to 140 | 5 1/2" | 6 5/8" | 2 | 1/4" | No | NEMA 4 | CSA Certified | 4744K25 | 000000 | ||
| 1 | Female | NPT | 3.8 | 120 psi @ 70° F | Zero Pressure Drop, Solenoid | 35 to 140 | 5 1/2" | 6 5/8" | 2 | 1/4" | No | NEMA 4 | CSA Certified | 4744K26 | 000000 | ||
Light Gray CPVC Body with DIN A Connection
| |
Assembled View | Exploded View |
Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Mounting Slots | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure @ Temp. | Valve Type | Temp. Range, ° F | Valve Lg. | Overall Ht. | No. of | Lg. | Fasteners Included | Enclosure Rating | Certification | Each | |||
Fail Closed—120V AC | |||||||||||||||||
| 1/2 | Female | NPT | 2.3 | 120 psi @ 70° F | Zero Pressure Drop, Solenoid | 35 to 190 | 5 5/16" | 6 3/8" | 2 | 1/4" | No | NEMA 4 | CSA Certified | 4865K34 | 0000000 | ||
| 3/4 | Female | NPT | 3.2 | 120 psi @ 70° F | Zero Pressure Drop, Solenoid | 35 to 190 | 5 1/2" | 6 5/8" | 2 | 1/4" | No | NEMA 4 | CSA Certified | 4865K35 | 000000 | ||
| 1 | Female | NPT | 3.8 | 120 psi @ 70° F | Zero Pressure Drop, Solenoid | 35 to 190 | 5 1/2" | 6 5/8" | 2 | 1/4" | No | NEMA 4 | CSA Certified | 4865K36 | 000000 | ||
Solenoid On/Off Valves for Drinking Water
Black PPE Body with DIN BI Connection
 |
NSF/ANSI 169—NSF/ANSI Standard 169 valves are rated for use with food equipment.
Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Pipe Size | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure @ Temp. | Valve Type | Temp. Range, ° F | Valve Lg. | Overall Ht. | Certification | Food Industry Std. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Fail Closed—24V DC | ||||||||||||||
| 1/2 | Female | NPT | 4.5 | 150 psi @ 180° F | Pressure Drop Assisted, Solenoid | 35 to 180 | 4 7/8" | 3 5/16" | CSA Certified | NSF/ANSI 61, NSF/ANSI 169 | 2492N12 | 0000000 | ||
| 3/4 | Female | NPT | 7 | 150 psi @ 180° F | Pressure Drop Assisted, Solenoid | 35 to 180 | 5 3/16" | 3 5/8" | CSA Certified | NSF/ANSI 61, NSF/ANSI 169 | 2492N14 | 000000 | ||
| 1 | Female | NPT | 13 | 150 psi @ 125° F | Pressure Drop Assisted, Solenoid | 35 to 180 | 6 1/2" | 3 7/8" | CSA Certified | NSF/ANSI 61, NSF/ANSI 169 | 2492N16 | 000000 | ||
Fail Closed—120V AC | ||||||||||||||
| 1/2 | Female | NPT | 4.5 | 150 psi @ 180° F | Pressure Drop Assisted, Solenoid | 35 to 180 | 4 7/8" | 3 5/16" | CSA Certified | NSF/ANSI 61, NSF/ANSI 169 | 2492N11 | 000000 | ||
| 3/4 | Female | NPT | 7 | 150 psi @ 180° F | Pressure Drop Assisted, Solenoid | 35 to 180 | 5 3/16" | 3 5/8" | CSA Certified | NSF/ANSI 61, NSF/ANSI 169 | 2492N13 | 000000 | ||
| 1 | Female | NPT | 13 | 150 psi @ 125° F | Pressure Drop Assisted, Solenoid | 35 to 180 | 6 1/2" | 3 7/8" | CSA Certified | NSF/ANSI 61, NSF/ANSI 169 | 2492N15 | 000000 | ||
High-Pressure Washdown Electrically Operated Air Directional Control Valves
Threaded Female Inlet × Threaded Female Outlet—Threaded Exhaust
 |
Spring Return—Valves with spring return actuation go back to their original position when voltage is removed.
Solenoid Return—Valves with solenoid return actuation go back to their original position when voltage is moved from the first solenoid to the second solenoid.
3 Way—3-way valves create one action, such as extending a cylinder.
4 Way—4-way valves create two actions, such as extending and then retracting a double-acting cylinder.
5/3 (Closed Center) Flow Pattern—5/3 (closed center) valves close all ports in the off position to stop equipment in a locked position with air pressure holding it in place.
2 Exhaust Ports—Valves with two exhaust ports allow you to independently control the speed of two different actions. Connect a flow control valve to each exhaust port.
Flow Coefficient (Cv)—Flow coefficient (Cv) indicates how much airflow can pass through a valve.
Overall, mm | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Air Directional Control Valve Type | Air Directional Control Valve Flow Pattern | No. of Flow Ports | No. of Exhaust Ports | Max. Flow Rate @ 100 psi, scfm | Flow Coefficient (Cv) | Pressure Range, psi | Vacuum Rating, in. Hg | Voltage, V DC | Lg. | Wd. | Ht. | Each | |||
Single Solenoid—Spring Return | |||||||||||||||
| 3 Way | 3/2 | 3 | 1 | 25.11 | 0.711 | -13 to 145 | 26.5 | 24 | 190.5 | 34.9 | 68.58 | 2963N12 | 0000000 | ||
| 4 Way | 5/2 | 5 | 2 | 25.11 | 0.711 | -13 to 145 | 26.5 | 24 | 190.5 | 34.9 | 68.58 | 2963N13 | 000000 | ||
| 4 Way | 5/3 (Closed Center) | 5 | 2 | 25.11 | 0.711 | -13 to 145 | 26.5 | 24 | 190.5 | 34.9 | 68.58 | 2963N17 | 000000 | ||
Double Solenoid—Solenoid Return | |||||||||||||||
| 4 Way | 5/2 | 5 | 2 | 25.11 | 0.711 | -13 to 145 | 26.5 | 24 | 190.5 | 34.9 | 68.58 | 2963N15 | 000000 | ||
Push-to-Connect Female Inlet × Push-to-Connect Female Outlet—Push-to-Connect Exhaust
|
Spring Return—Valves with spring return actuation go back to their original position when voltage is removed.
Solenoid Return—Valves with solenoid return actuation go back to their original position when voltage is moved from the first solenoid to the second solenoid.
3 Way—3-way valves create one action, such as extending a cylinder.
4 Way—4-way valves create two actions, such as extending and then retracting a double-acting cylinder.
5/3 (Closed Center) Flow Pattern—5/3 (closed center) valves close all ports in the off position to stop equipment in a locked position with air pressure holding it in place.
2 Exhaust Ports—Valves with two exhaust ports allow you to independently control the speed of two different actions. Connect a flow control valve to each exhaust port.
Flow Coefficient (Cv)—Flow coefficient (Cv) indicates how much airflow can pass through a valve.
Overall, mm | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Air Directional Control Valve Type | Air Directional Control Valve Flow Pattern | No. of Flow Ports | No. of Exhaust Ports | For Inlet Tube OD, mm | For Outlet Tube OD, mm | Max. Flow Rate @ 100 psi, scfm | Flow Coefficient (Cv) | Pressure Range, psi | Vacuum Rating, in. Hg | Voltage, V DC | Lg. | Wd. | Ht. | Each | |||
Single Solenoid—Spring Return | |||||||||||||||||
| 3 Way | 3/2 | 3 | 1 | 8 | 8 | 25.11 | 0.711 | -13 to 145 | 26.5 | 24 | 190.5 | 34.9 | 76.2 | 2963N11 | 0000000 | ||
| 4 Way | 5/2 | 5 | 2 | 8 | 8 | 25.11 | 0.711 | -13 to 145 | 26.5 | 24 | 190.5 | 34.9 | 76.2 | 2963N14 | 000000 | ||
| 4 Way | 5/3 (Closed Center) | 5 | 2 | 8 | 8 | 25.11 | 0.711 | -13 to 145 | 26.5 | 24 | 190.5 | 34.9 | 76.2 | 2963N18 | 000000 | ||
Double Solenoid—Solenoid Return | |||||||||||||||||
| 4 Way | 5/2 | 5 | 2 | 8 | 8 | 25.11 | 0.711 | -13 to 145 | 26.5 | 24 | 190.5 | 34.9 | 76.2 | 2963N16 | 000000 | ||
Food Industry Solenoid On/Off Valves with Push-to-Connect Fittings
 |
Insert tubing into the fittings on these valves—no heat, solder, or flux required. Valves meet NSF/ANSI 169 for use with food equipment. They operate on electricity to automatically start and stop flow.
All are fail closed unless actuated. Valves don’t require a minimum pressure drop between the inlet and outlet for operation. The actuator is directly mounted to the valve body to minimize movement and reduce wear.
Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For Tube OD | Gender | Flow Coefficient (Cv) | Max. Pressure @ Temp. | Valve Type | Manual Override | Temp. Range, ° F | Seal Material | Valve Lg. | Overall Ht. | Quick-Disconnect Tab Wd. | Certification | Food Industry Std. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Polycarbonate Body with Quick-Disconnect-Terminal Wire Connection | ||||||||||||||||
Fail Closed—24V DC | ||||||||||||||||
| 1/4" | Female | 0.314 | 80 psi @ 70° F | Zero Pressure Drop, Solenoid | No | -10 to 100 | EPM Rubber | 2" | 3" | 1/4" | CSA Certified | NSF/ANSI 169 | 5489T633 | 0000000 | ||
| 1/4" | Female | 0.367 | 40 psi @ 70° F | Zero Pressure Drop, Solenoid | No | -10 to 100 | EPM Rubber | 2" | 3" | 1/4" | CSA Certified | NSF/ANSI 169 | 5489T653 | 000000 | ||
Fail Closed—120V AC | ||||||||||||||||
| 1/4" | Female | 0.314 | 80 psi @ 70° F | Zero Pressure Drop, Solenoid | No | -10 to 100 | EPM Rubber | 2" | 3" | 1/4" | CSA Certified | NSF/ANSI 169 | 5489T631 | 000000 | ||
| 1/4" | Female | 0.367 | 40 psi @ 70° F | Zero Pressure Drop, Solenoid | No | -10 to 100 | EPM Rubber | 2" | 3" | 1/4" | CSA Certified | NSF/ANSI 169 | 5489T651 | 000000 | ||
Polysulfone Body with Quick-Disconnect-Terminal Wire Connection | ||||||||||||||||
Fail Closed—24V DC | ||||||||||||||||
| 1/4" | Female | 0.228 | 120 psi @ 70° F | Zero Pressure Drop, Solenoid | No | -10 to 100 | EPM Rubber | 2" | 3" | 1/4" | CSA Certified | NSF/ANSI 169 | 5489T613 | 000000 | ||
Fail Closed—120V AC | ||||||||||||||||
| 1/4" | Female | 0.228 | 120 psi @ 70° F | Zero Pressure Drop, Solenoid | No | -10 to 100 | EPM Rubber | 2" | 3" | 1/4" | CSA Certified | NSF/ANSI 169 | 5489T611 | 000000 | ||
Single-Action Electrically Operated Air Directional Control Valves
 |
Style K |
These valves create one action, such as extending a cylinder. Apply voltage to the electrical connection to actuate. Also known as 3-way and 3/2 valves, they direct airflow from the inlet to your equipment and exhaust return airflow to create motion. In the off position, they exhaust air from the system, allowing equipment to reset so the action can be repeated. Valves without an exhaust connection exhaust air to the atmosphere.
Push to Connect Female Inlet × Push to Connect Female Outlet: Fail-Closed Valve
|
Style K |
Fail-closed valves block airflow until actuated.
Spring Return—Valves with spring return actuation go back to their original position when voltage is removed.
Manifold Mount—Manifold-mount valves plug into a manifold (sold separately) to create multiple actions from a single pressure input. Manifolds with multiple exhaust ports have one set of inlet and exhaust ports on each side, so they can be strung together in a series. When using a single manifold, cover the ports on the side you are not using with plugs (sold separately).
Flow Coefficient (Cv)—Flow coefficient (Cv) is a measurement that indicates how much airflow can pass through a valve. When selecting between valves with the same port size, choose the valve with the higher flow coefficient to ensure it provides enough airflow to operate your system.
Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | No. of Flow Ports | For Inlet Tube OD | For Outlet Tube OD | Exhaust Connection | Max. Flow Rate @ 100 psi, scfm | Flow Coefficient (Cv) | Pressure Range, psi | Lg. | Wd. | Ht. | Mount Type | Choose a Voltage | Each | |||
Single Solenoid—Spring Return | ||||||||||||||||
| K | 3 | 5/32" | 5/32" | Push to Connect | 0.6 | 0.01 | 0 to 120 | 1 3/8" | 5/8" | 1 3/4" | Manifold, Screw In | 12V DC, 24V DC, 120V AC | 62095K2 | 000000 | ||
| K | 3 | 5/32" | 5/32" | Push to Connect | 1.1 | 0.02 | 0 to 120 | 1 3/8" | 5/8" | 1 3/4" | Manifold, Screw In | 12V DC, 24V DC, 120V AC | 62095K1 | 00000 | ||
 |
No. of | Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Stations | Flow Ports | Inlet Ports | Exhaust Ports | For Inlet Tube OD | For Exhaust Tube OD | Lg. | Wd. | Ht. | Mounting Location | Mounting Hole Dia. | For DIN Rail Size, mm | Mounting Fasteners Included | Each | ||
| 2 | 2 | 1 | 1 | 1/4" | 5/32" | 2" | 5/8" | 1 7/8" | DIN Rail | 0.69" | 15 | No | 62095K51 | 000000 | |
| 3 | 2 | 1 | 1 | 1/4" | 5/32" | 2 5/8" | 5/8" | 1 1/4" | DIN Rail | 0.69" | 15 | No | 62095K52 | 00000 | |
| 4 | 2 | 1 | 1 | 1/4" | 5/32" | 3 1/4" | 5/8" | 1 1/4" | DIN Rail | 0.69" | 15 | No | 62095K53 | 00000 | |
| 5 | 2 | 1 | 1 | 1/4" | 5/32" | 3 7/8" | 5/8" | 1 1/4" | DIN Rail | 0.69" | 15 | No | 62095K54 | 00000 | |
Solenoid On/Off Valves with Flow Adjustment
 |
Turn the knob to adjust how much these valves will open or close when actuated. They are often used in irrigation and landscaping applications. All operate on electricity to automatically start and stop flow.
These valves require a minimum pressure drop between the inlet and the outlet for operation; the upstream pressure must be greater than the downstream pressure. The actuator is directly mounted to the valve body to minimize movement and reduce wear.
Fail-Closed Valve—Fail closed valves are closed unless actuated.
Fail-Open Valve—Fail open valves are open unless actuated.
Pipe Size | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure @ Temp. | Valve Type | Temp. Range, ° F | Seal Material | Valve Lg. | Overall Ht. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Nylon Body with Wire Lead Connection | |||||||||||||
Fail Closed—24V AC | |||||||||||||
| 1 | Female | NPT | Not Rated | 175 psi @ 70° F | Pressure Drop Assisted, Solenoid | 35 to 150 | EPDM | 4 1/4" | 5 1/2" | 4903K971 | 000000 | ||
| 1 1/2 | Female | NPT | Not Rated | 160 psi @ 70° F | Pressure Drop Assisted, Solenoid | 35 to 150 | EPDM | 5 13/16" | 7 1/16" | 4903K981 | 000000 | ||
| 2 | Female | NPT | Not Rated | 160 psi @ 70° F | Pressure Drop Assisted, Solenoid | 35 to 150 | EPDM | 6 1/2" | 8 1/2" | 4903K991 | 000000 | ||
Fail Closed—120V AC | |||||||||||||
| 1 | Female | NPT | Not Rated | 175 psi @ 70° F | Pressure Drop Assisted, Solenoid | 35 to 150 | EPDM | 4 1/4" | 5 1/2" | 4903K972 | 00000 | ||
| 1 1/2 | Female | NPT | Not Rated | 160 psi @ 70° F | Pressure Drop Assisted, Solenoid | 35 to 150 | EPDM | 5 13/16" | 7 1/16" | 4903K982 | 000000 | ||
| 2 | Female | NPT | Not Rated | 160 psi @ 70° F | Pressure Drop Assisted, Solenoid | 35 to 150 | EPDM | 6 1/2" | 8 1/2" | 4903K992 | 000000 | ||
Fail Open—24V AC | |||||||||||||
| 1 | Female | NPT | Not Rated | 175 psi @ 70° F | Pressure Drop Assisted, Solenoid | 35 to 150 | EPDM | 4 1/4" | 5 15/16" | 4903K762 | 000000 | ||
Fail Open—120V AC | |||||||||||||
| 1 | Female | NPT | Not Rated | 175 psi @ 70° F | Pressure Drop Assisted, Solenoid | 35 to 150 | EPDM | 4 1/4" | 5 15/16" | 4903K661 | 000000 | ||
Two-Speed Two-Action Electrically Operated Air Directional Control Valves
 |
Style K |
Often used to extend and then retract a cylinder at different speeds, these valves create two actions and have two exhaust ports, which allows you to control the speed of each action by attaching a flow control valve to each exhaust port. Also known as 4-way and 5/2 valves, they actuate when voltage is applied to the electrical connection. They direct airflow from the inlet to your equipment and exhaust return airflow to create motion.
Push-to-Connect Female Inlet × Push-to-Connect Female Outlet—Push-to-Connect Exhaust
|
Style K |
Spring Return—Valves with spring return actuation go back to their original position when voltage is removed.
Solenoid Return—Valves with solenoid return actuation go back to their original position when voltage is moved from the first solenoid to the second solenoid.
Flow Coefficient (Cv)—Flow coefficient (Cv) is a measurement that indicates how much airflow can pass through a valve. When selecting between valves with the same port size, choose the valve with the higher flow coefficient to ensure it provides enough airflow to operate your system.
Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | No. of Flow Ports | For Inlet Tube OD, mm | For Outlet Tube OD, mm | Max. Flow Rate @ 100 psi, scfm | Flow Coefficient (Cv) | Pressure Range, psi | Vacuum Rating, in. Hg | Lg. | Wd. | Ht. | Mount Type | Voltage, V DC | Each | |||
Single Solenoid—Spring Return | ||||||||||||||||
| K | 5 | 6 | 6 | 17.5 | 0.31 | 44 to 101 | 29.52 | 3 1/8" | 7/16" | 2 1/8" | Screw In | 24 | 4658A31 | 0000000 | ||
Double Solenoid—Solenoid Return | ||||||||||||||||
| K | 5 | 6 | 6 | 17.5 | 0.31 | 29 to 101 | 29.52 | 3 1/4" | 7/16" | 2 1/8" | Screw In | 24 | 4658A32 | 000000 | ||
Two-Speed Two-Action Electrically Operated Air Directional Control Valves with Full Shut-Off
 |
Style C |
These valves close all ports in the off position to stop equipment in a locked position with air pressure holding it in place. Often used to extend and then retract a cylinder at different speeds, they create two actions and have two exhaust ports, which allows you to control the speed of each action by attaching a flow control valve to each exhaust port. Apply voltage to the electrical connection to actuate. They direct airflow from the inlet to your equipment and exhaust return airflow to create motion. Also known as 4-way and 5/3 closed center valves.
Push-to-Connect Female Inlet × Push-to-Connect Female Outlet—Push-to-Connect Exhaust
|
Style C |
Spring Return—Valves with spring return actuation go back to their original position when voltage is removed.
Flow Coefficient (Cv)—Flow coefficient (Cv) is a measurement that indicates how much airflow can pass through a valve. When selecting between valves with the same port size, choose the valve with the higher flow coefficient to ensure it provides enough airflow to operate your system.
Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | No. of Flow Ports | For Inlet Tube OD, mm | For Outlet Tube OD, mm | Max. Flow Rate @ 100 psi, scfm | Flow Coefficient (Cv) | Pressure Range, psi | Vacuum Rating, in. Hg | Lg. | Wd. | Ht. | Mount Type | Voltage, V DC | Each | |||
Double Solenoid—Spring Return | ||||||||||||||||
| C | 5 | 6 | 6 | 17.5 | 0.31 | 44 to 101 | 29.52 | 3 1/4" | 7/16" | 2 1/8" | Screw In | 24 | 4658A33 | 0000000 | ||
Robot-Arm-Mounted Electrically Operated Air Directional Control Valves
 |  |
Control air-powered robot tools, such as pick-and-place grippers. These valves have two three-way valves, also known as 3/2 valves, that you can control separately with your robot’s program. For example, you can connect two single-acting tools, such as two grippers with spring jaw returns, using one valve for each. Alternatively, use both valves for one double-acting tool, such as an air cylinder—one valve pushes the cylinder out, the other pulls it back. In both setups, air escapes through vents on the side of the manifold.
These valves come with everything you need for quick installation. Use the hook and loop straps to mount them to your robot arm, then plug the electrical cord into the M8 connection at the end of the arm. Connect your compressed air line to the inlet. Last, run tubing from the valve to your robot tool.
Inlet | Outlet | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
No. of Flow Ports | Connection | For Tube OD, mm | Connection | For Tube OD, mm | Max. Flow Rate @ Pressure | Flow Coefficient (Cv) | Pressure Range, psi | Each | ||
| 3 | Push to Connect | 6 | Push to Connect | 6 | 2 scfm @ 80 psi | 0.09 | 0 to 100 | 9015N11 | 0000000 | |
Robot-Arm-Mounted Electrically Operated Air On/Off Valves
 |  |
Control the flow of air to robot tools from your robot's program. Often used with air-powered vacuum lifters, these electrically controlled valves open to supply air to the lifter, generating suction to pick up a part. When these valves close, the suction stops and the part drops. An integrated switch monitors the tool’s vacuum level via analog signals, so you know if a part was successfully picked. A built-in LED display shows the vacuum status and lets you change vacuum setpoints.
These valves come with everything you need for quick installation. Use the hook and loop straps to mount them to your robot arm, then plug the electrical cord into the M8 connection at the end of the arm. Connect your compressed air line to the inlet. Last, run tubing from the valve to your robot tool.
Rapid Part Release—Valves with rapid part release can send a burst of air to push a part off your vacuum lifter, so you don’t have to wait for it to drop. They’re often used for pick-and-place applications requiring high speed and precision.
Inlet | Outlet | Overall | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Pressure, psi | Flow Coefficient (Cv) | Max. Flow Rate @ 80 psi, scfm | Connection | For Tube OD, mm | Connection | For Tube OD, mm | Temp. Range, ° F | Lg. | Ht. | Each | |||
Valves with Vacuum Monitoring | |||||||||||||
| 100 | 0.24 | 6 | Push to Connect | 6 | Push to Connect | 6 | 35 to 120 | 2 5/8" | 4 1/8" | 8880N13 | 0000000 | ||
Valves with Rapid Part Release and Vacuum Monitoring | |||||||||||||
| 100 | 0.24 | 6 | Push to Connect | 6 | Push to Connect | 6 | 35 to 120 | 3 1/2" | 4 1/8" | 8880N11 | 000000 | ||
Compact Solenoid On/Off Valves for Coolant
 |
Acetal Body with Wire Lead Connection |
Reduce your pipeline footprint with these low-profile valves that are about half the size of standard valves for coolant. They operate on electricity to automatically start and stop flow.
Valves are fail closed unless actuated. They don’t require a minimum pressure drop between the inlet and outlet for operation. The actuator is directly mounted to the valve body to minimize movement and reduce wear.
Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Mounting Holes | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure @ Temp. | Valve Type | Manual Override | Temp. Range, ° F | Seal Material | Valve Lg. | Overall Ht. | No. of | Dia. | Fasteners Included | Each | |||
Acetal Body with Wire Lead Connection | |||||||||||||||||
Fail Closed—120V AC | |||||||||||||||||
| 1/8 | Female | NPT | 0.09 | 300 psi @ 150° F | Zero Pressure Drop, Solenoid | No | 0 to 150 | Fluoroelastomer | 1 5/16" | 2 1/4" | 2 | 1/4" | No | 5760T121 | 000000 | ||
